AGQ200S09Z Equivalent & Substitute Parts

Part Overview

The AGQ200S09Z is a telecom relay manufactured by Panasonic Electric Works, configured as a DPDT (2 Form C) surface mount component with 2A contact rating and 9VDC coil voltage. This part is active in production and RoHS compliant. Substitute parts are identified based on matching electrical specifications, mechanical compatibility, and functional equivalence within the telecom relay category.

Key Parameters

Parameter	Value
Coil Voltage	9VDC
Contact Form	DPDT (2 Form C)
Contact Rating (Current)	2 A
Mounting Type	Surface Mount
Coil Current	15.5 mA
Coil Resistance	579 Ohms
Must Operate Voltage	6.75 VDC
Must Release Voltage	0.9 VDC
Operating Temperature Range	-40°C ~ 85°C
Coil Type	Non Latching
Relay Type	Telecom

Substitute Part Grouping Explanation

Substitution eligibility for the AGQ200S09Z is determined by the following critical parameters:

Coil voltage: 9VDC (exact match required)
Contact form: DPDT (2 Form C) (exact match required)
Contact rating: 2 A (exact match required)
Coil current: 15.5 mA (exact match required)
Coil resistance: 579 Ohms (exact match required)
Must operate and release voltages: 6.75 VDC and 0.9 VDC (exact match required)
Operating temperature range: -40°C ~ 85°C (exact match required)
Mounting type: Surface Mount (exact match required)
Coil type: Non Latching (exact match required)

The identified substitute parts IM05GR and IM05JR meet all critical electrical and mechanical parameters. Differences in switching voltage ratings, termination style, seal rating, and contact material composition do not affect functional substitution within the specified operating parameters.

Parameter Comparison

Parameter	AGQ200S09Z (Panasonic)	IM05GR (TE Connectivity)	IM05JR (TE Connectivity)
Manufacturer	Panasonic Electric Works	TE Connectivity Potter & Brumfield Relays	TE Connectivity Potter & Brumfield Relays
Coil Voltage	9VDC	9VDC	9VDC
Contact Form	DPDT (2 Form C)	DPDT (2 Form C)	DPDT (2 Form C)
Contact Rating (Current)	2 A	2 A	2 A
Mounting Type	Surface Mount	Surface Mount	Surface Mount
Coil Current	15.5 mA	15.5 mA	15.5 mA
Coil Resistance	579 Ohms	579 Ohms	579 Ohms
Must Operate Voltage	6.75 VDC	6.75 VDC	6.75 VDC
Must Release Voltage	0.9 VDC	0.9 VDC	0.9 VDC
Operate Time	4 ms	3 ms	3 ms
Release Time	4 ms	3 ms	3 ms
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C
Coil Type	Non Latching	Non Latching	Non Latching
Relay Type	Telecom	Telecom	Telecom
Packaging	Tape & Reel (TR)	Cut Tape (CT)	Tape & Reel (TR)
Termination Style	Gull Wing	Gull Wing	J Lead
Seal Rating	Not specified	Sealed - Hermetically	Sealed - Hermetically
RoHS Status	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Active	Active	Active

Engineering Selection Recommendations

All three parts—AGQ200S09Z, IM05GR, and IM05JR—are active products with current manufacturing status. The AGQ200S09Z carries RoHS compliance certification, while both TE Connectivity substitutes carry ROHS3 compliance, indicating enhanced environmental standards. Both substitute parts are hermetically sealed, providing additional protection in demanding environments.

Selection between IM05GR and IM05JR depends on packaging and termination requirements. IM05GR is supplied in Cut Tape packaging with Gull Wing termination, matching the AGQ200S09Z termination style. IM05JR is supplied in Tape & Reel packaging with J Lead termination, requiring PCB design accommodation for the different lead configuration.

Frequently Asked Questions (FAQ)

Q: Can IM05GR and IM05JR be used interchangeably with AGQ200S09Z?

A: Both IM05GR and IM05JR meet all critical electrical specifications (9VDC coil, DPDT contact form, 2A rating, 579 Ohm coil resistance, and identical operate/release voltage thresholds). Interchangeability depends on PCB layout compatibility. IM05GR uses Gull Wing termination matching AGQ200S09Z; IM05JR uses J Lead termination and requires PCB design modification.

Q: What is the difference between IM05GR and IM05JR?

A: The primary differences are packaging format and termination style. IM05GR is supplied in Cut Tape with Gull Wing leads; IM05JR is supplied in Tape & Reel with J Lead termination. Both share identical electrical specifications and hermetic sealing.

Q: Are there differences in switching voltage ratings between these parts?

A: Yes. AGQ200S09Z is rated for 125VAC and 110VDC maximum switching voltage. Both IM05GR and IM05JR are rated for 250VAC and 220VDC maximum switching voltage. This difference does not affect substitution; the higher ratings of the TE Connectivity parts provide additional margin in applications within the AGQ200S09Z operating range.

Q: Do the operate and release time differences affect substitution?

A: AGQ200S09Z specifies 4 ms operate and release times; both IM05GR and IM05JR specify 3 ms. The faster response time of the substitute parts does not prevent substitution and may provide performance improvement in time-sensitive applications.

Q: What compliance certifications apply to these parts?

A: AGQ200S09Z carries RoHS compliance. IM05GR and IM05JR carry ROHS3 compliance, representing a more recent environmental standard. All three parts are EAR99 classified and share the same HTSUS code (8536.41.0020).

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message