AGC-30-R Equivalent & Substitute Parts Reference

Part Overview

The AGC-30-R is a 30 A, 32 V AC/DC fast-blow glass cartridge fuse manufactured by Eaton - Electronics Division. This component is designed for use in 3AB and 3AG fuse holders with dimensions of 1/4" x 1-1/4" (6.35mm x 31.75mm). The part maintains Active product status and is RoHS Compliant, making it suitable for current electronic applications requiring reliable overcurrent protection in low-voltage circuits.

Equivalent and substitute parts are identified based on matching electrical ratings, mechanical compatibility, and functional performance characteristics. Alternative sources provide equivalent protection functionality while maintaining compatibility with standard fuse holder specifications.

Substiute Parts

AGC-30-R

Eaton - Electronics DivisionIn Stock: 915AGC-30-R Datasheet

Current PartRFQ

BK/AGC-30-R

Eaton - Electronics DivisionIn Stock: 1987BK/AGC-30-R Datasheet

DirectRFQ

0312030.HXP

Littelfuse Inc.In Stock: 8750312030.HXP Datasheet

SimilarRFQ

0312030.MXP

Littelfuse Inc.In Stock: 20590312030.MXP Datasheet

SimilarRFQ

0311030.H

Littelfuse Inc.In Stock: 11250311030.H Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the AGC-30-R is determined by the following critical parameters:

Primary Matching Criteria:

• Current Rating: 30 A (exact match required)
• Voltage Rating (AC): 32 V (exact match required)
• Fuse Type: Cartridge, Glass (exact match required)
• Response Time: Fast Blow (exact match required)
• Package / Case: 3AB, 3AG, 1/4" x 1-1/4" (exact match required)
• Size / Dimension: 0.250" Dia x 1.250" L (exact match required)

Secondary Compatibility Factors:

• Operating Temperature Range: -55°C ~ 125°C (minimum requirement)
• Approval Agencies: CSA and/or UL certification required
• RoHS Compliance Status: ROHS3 Compliant or RoHS Compliant acceptable

All identified substitute parts meet these criteria and are functionally interchangeable within applications designed for the AGC-30-R specification.

Parameter Comparison

Engineering Selection Recommendations

Direct Manufacturer Equivalent: BK/AGC-30-R from Eaton - Electronics Division is the direct equivalent designation for AGC-30-R. Both parts share identical electrical specifications, mechanical dimensions, and approval certifications (CSA, UL). The BK/AGC-30-R carries ROHS3 Compliant status compared to the base RoHS Compliant designation of AGC-30-R. Selection between these two Eaton variants depends on specific RoHS compliance requirements of the end application.

Cross-Manufacturer Alternatives: Littelfuse Inc. provides three substitute options: 0312030.HXP, 0312030.MXP, and 0311030.H. All three maintain the required 30 A, 32 V AC/DC fast-blow cartridge fuse specification with 3AB/3AG holder compatibility and identical physical dimensions.

The 0312030.HXP and 0312030.MXP variants from Littelfuse carry cULus certification (combined CSA and UL approval) and ROHS3 Compliant status. These parts are functionally equivalent to AGC-30-R for applications requiring cross-manufacturer sourcing.

The 0311030.H from Littelfuse maintains AGC series designation compatibility and carries CSA and UL approvals with ROHS3 Compliant status. This part is suitable for applications where AGC series continuity is preferred.

All substitute parts maintain Active product status and are suitable for direct replacement in circuits designed for AGC-30-R operation.

Frequently Asked Questions (FAQ)

Q: Can BK/AGC-30-R be used as a direct replacement for AGC-30-R?

A: Yes. BK/AGC-30-R is the direct Eaton equivalent with identical electrical ratings (30 A, 32 V AC/DC), fuse type (fast-blow glass cartridge), and mechanical specifications (3AB/3AG holder, 1/4" x 1-1/4" dimensions). Both parts carry CSA and UL approvals and maintain Active product status.

Q: What is the difference between Eaton AGC-30-R and Littelfuse 0312030.HXP?

A: Both parts meet identical electrical and mechanical requirements: 30 A, 32 V AC/DC fast-blow glass cartridge fuses with 3AB/3AG compatibility and 1/4" x 1-1/4" dimensions. The primary difference is manufacturer designation and approval agency listing. Littelfuse 0312030.HXP carries cULus certification, while Eaton AGC-30-R carries separate CSA and UL certifications. Both are ROHS3 Compliant and suitable for equivalent circuit protection.

Q: Are 0312030.HXP and 0312030.MXP interchangeable?

A: Yes. Both Littelfuse parts share identical electrical specifications (30 A, 32 V AC/DC fast-blow), fuse type (glass cartridge), package designation (3AB/3AG), and physical dimensions (1/4" x 1-1/4"). Both carry cULus approval and ROHS3 Compliant status. Selection between these variants depends on inventory availability and supplier preference.

Q: Can 0311030.H replace AGC-30-R in all applications?

A: 0311030.H meets all critical electrical and mechanical parameters: 30 A, 32 V AC/DC fast-blow glass cartridge with 3AB/3AG holder compatibility and 1/4" x 1-1/4" dimensions. It carries CSA and UL approvals and ROHS3 Compliant status. Operating temperature range is not specified for 0311030.H, whereas AGC-30-R specifies -55°C ~ 125°C. Applications requiring confirmed operation across the full -55°C ~ 125°C range should verify 0311030.H temperature specifications with Littelfuse.

Q: What holder types are compatible with these fuses?

A: All listed parts require 3AB or 3AG fuse holders. The 1/4" x 1-1/4" (6.35mm x 31.75mm) cartridge dimensions are standardized across all substitute parts and are compatible with standard 3AB and 3AG holder designs.

Q: Are all substitute parts RoHS compliant?

A: Yes. AGC-30-R is RoHS Compliant. All substitute parts (BK/AGC-30-R, 0312030.HXP, 0312030.MXP, and 0311030.H) carry ROHS3 Compliant status, which represents enhanced RoHS compliance. All parts are suitable for applications with RoHS requirements.