Equivalent & Substitute Parts for AF2010JK-0762RL

Part Overview

The AF2010JK-0762RL is a 62 Ohms ±5% 0.75W thick film chip resistor in 2010 (5025 Metric) package manufactured by YAGEO. This component is designed for automotive applications with AEC-Q200 qualification and anti-sulfur coating. The part is currently active in production with 1113 pieces available in stock. Alternative equivalent parts are available to support supply chain flexibility and packaging preferences.

Substiute Parts

AF2010JK-0762RL

YAGEOIn Stock: 1162AF2010JK-0762RL Datasheet

Current PartRFQ

AC2010JK-0762RL

YAGEOIn Stock: 8830AC2010JK-0762RL Datasheet

MFR RecommendedRFQ

RC2010JK-0762RL

YAGEOIn Stock: 8761RC2010JK-0762RL Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the AF2010JK-0762RL is determined by strict equivalence across the following critical parameters:

• Resistance value: 62 Ohms
• Tolerance: ±5%
• Power rating: 0.75W
• Package: 2010 (5025 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• RoHS compliance: ROHS3
• Moisture sensitivity level: 1

The substitute parts AC2010JK-0762RL and RC2010JK-0762RL meet all electrical and mechanical requirements for direct substitution. Differences exist only in packaging format (Cut Tape & Digi-Reel® versus Tape & Reel) and specific feature sets (anti-sulfur versus moisture resistant), which do not affect electrical performance or mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

All three parts—AF2010JK-0762RL, AC2010JK-0762RL, and RC2010JK-0762RL—are electrically and mechanically equivalent and suitable for direct substitution in applications requiring a 62 Ohm ±5% 0.75W 2010 package resistor.

Selection between these parts should be based on:

• Packaging requirements: AF2010JK-0762RL and RC2010JK-0762RL are supplied in Tape & Reel format; AC2010JK-0762RL is available in Cut Tape and Digi-Reel® format.
• Environmental protection: AF2010JK-0762RL includes anti-sulfur coating; AC2010JK-0762RL and RC2010JK-0762RL feature moisture-resistant construction.
• Inventory availability: AC2010JK-0762RL (8801 pcs) and RC2010JK-0762RL (8654 pcs) have higher stock levels than AF2010JK-0762RL (1113 pcs).

All parts maintain AEC-Q200 automotive qualification, ROHS3 compliance, and identical electrical performance across the specified operating temperature range of -55°C to 155°C.

Frequently Asked Questions (FAQ)

Q: Can AC2010JK-0762RL be used as a direct replacement for AF2010JK-0762RL?

A: Yes. Both parts share identical electrical specifications (62 Ohms ±5%, 0.75W), mechanical dimensions (2010 package), and operating characteristics. The primary difference is packaging format (Cut Tape & Digi-Reel® versus Tape & Reel) and surface protection features (moisture resistant versus anti-sulfur). These differences do not affect circuit performance or PCB compatibility.

Q: What is the difference between the AF and AC series?

A: The AF series includes anti-sulfur coating for enhanced corrosion resistance in harsh environments. The AC series features moisture-resistant construction. Both are AEC-Q200 qualified automotive-grade resistors with identical electrical performance.

Q: Can RC2010JK-0762RL replace AF2010JK-0762RL in automotive applications?

A: Yes. RC2010JK-0762RL meets all automotive requirements including AEC-Q200 qualification, identical operating temperature range (-55°C ~ 155°C), and equivalent electrical specifications. The RC_L series provides moisture-resistant thick film construction suitable for automotive environments.

Q: Are there packaging compatibility concerns when substituting these parts?

A: AF2010JK-0762RL and RC2010JK-0762RL are both supplied in Tape & Reel format and are directly compatible with standard pick-and-place equipment. AC2010JK-0762RL is available in Cut Tape and Digi-Reel® format, which may require different handling or feeder configurations depending on assembly equipment capabilities.

Q: Do all three parts meet RoHS and REACH compliance requirements?

A: Yes. All three parts are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory standards for electronic component manufacturing and use.