AF2010JK-07150RL Equivalent & Substitute Parts

Part Overview

The AF2010JK-07150RL is a 150 Ohm ±5% 0.75W thick film chip resistor in 2010 (5025 Metric) package manufactured by YAGEO. This component is rated for automotive applications under AEC-Q200 and features anti-sulfur construction. The part is active in production with 1013 units currently in stock. Substitute parts are identified to provide design flexibility, accommodate supply chain variations, or meet specific tolerance and feature requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

AF2010JK-07150RL

YAGEOIn Stock: 1097AF2010JK-07150RL Datasheet

Current PartRFQ

AC2010FK-07150RL

YAGEOIn Stock: 7762AC2010FK-07150RL Datasheet

MFR RecommendedRFQ

RC2010FK-07150RL

YAGEOIn Stock: 7307RC2010FK-07150RL Datasheet

MFR RecommendedRFQ

RC2010JK-07150RL

YAGEOIn Stock: 10251RC2010JK-07150RL Datasheet

MFR RecommendedRFQ

CRCW2010150RFKEF

Vishay DaleIn Stock: 21467CRCW2010150RFKEF Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the AF2010JK-07150RL is determined by the following critical parameters:

• Resistance Value: Must be 150 Ohms
• Package / Case: Must be 2010 (5025 Metric)
• Power Rating: Must be 0.75W (3/4W)
• Operating Temperature Range: Must support -55°C ~ 155°C
• Composition: Thick Film
• Compliance: ROHS3 Compliant, MSL 1

Tolerance variations (±5% vs ±1%) are permitted substitutions when design specifications allow tighter tolerance. Packaging format variations (Tape & Reel vs Cut Tape) are interchangeable for component procurement. Automotive AEC-Q200 rating and moisture-resistant features are compatible enhancements. All identified substitutes maintain identical electrical performance within the specified operating range and mechanical footprint.

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalent (Same Tolerance, Same Features): RC2010JK-07150RL maintains identical electrical specifications and tolerance to the AF2010JK-07150RL. Both are YAGEO products with ±5% tolerance and moisture-resistant construction. This part is suitable for direct substitution in applications where tolerance and feature parity are required.

Upgraded Tolerance Substitutes: AC2010FK-07150RL and CRCW2010150RFKEF both provide ±1% tolerance, representing a tighter tolerance specification than the original ±5%. Both maintain AEC-Q200 automotive rating and full operating temperature range compatibility. AC2010FK-07150RL is YAGEO-sourced; CRCW2010150RFKEF is Vishay Dale-sourced. These are suitable when design specifications permit or require improved tolerance performance.

Alternative Tolerance with Packaging Variation: RC2010FK-07150RL offers ±1% tolerance with Cut Tape & Digi-Reel packaging instead of Tape & Reel format. This part lacks explicit AEC-Q200 rating but maintains all electrical and thermal specifications. Selection depends on packaging procurement requirements and whether automotive certification is mandatory for the application.

Cross-Manufacturer Option: CRCW2010150RFKEF (Vishay Dale) provides a qualified alternative from a different manufacturer while maintaining AEC-Q200 compliance, ±1% tolerance, and identical package dimensions. Height-seated maximum is 0.028" (0.70mm) versus 0.026" (0.65mm) for YAGEO parts—a 0.02mm difference within typical PCB assembly tolerances.

All substitutes are ROHS3 compliant and MSL 1 rated. Product status is active for all listed parts with adequate inventory availability.

Frequently Asked Questions (FAQ)

Q: Can AC2010FK-07150RL replace AF2010JK-07150RL directly? A: Yes. Both are 150 Ohm, 0.75W, 2010 package resistors with identical operating temperature range and AEC-Q200 rating. AC2010FK-07150RL has ±1% tolerance versus ±5% on the original. If circuit design permits ±1% tolerance, this is a direct substitute with improved accuracy.

Q: What is the difference between Tape & Reel and Cut Tape packaging? A: Tape & Reel is supplied on continuous carrier tape on a reel for automated assembly. Cut Tape & Digi-Reel is supplied in shorter tape segments. Both formats contain identical components; the difference is procurement and handling format. Selection depends on assembly equipment and order quantity requirements.

Q: Is CRCW2010150RFKEF compatible with the original AF2010JK-07150RL? A: Yes. Both are 150 Ohm, 0.75W, 2010 package thick film resistors with ±100ppm/°C temperature coefficient and -55°C ~ 155°C operating range. CRCW2010150RFKEF is manufactured by Vishay Dale and offers ±1% tolerance with AEC-Q200 rating. The maximum seated height differs by 0.02mm (0.028" vs 0.026"), which is within standard PCB assembly tolerances.

Q: Does RC2010FK-07150RL lack AEC-Q200 certification? A: RC2010FK-07150RL does not list explicit AEC-Q200 rating in the provided specifications. If automotive AEC-Q200 compliance is a design requirement, use AC2010FK-07150RL or CRCW2010150RFKEF instead.

Q: Can I use a ±1% tolerance part in place of a ±5% tolerance part? A: Yes. A ±1% tolerance part is a tighter specification and will perform within the ±5% tolerance window. This substitution is valid when component availability or supply chain requirements necessitate it. Verify that circuit design does not depend on the wider tolerance band.

Q: Are all substitute parts ROHS3 compliant? A: Yes. All listed substitute parts are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating, matching the original AF2010JK-07150RL.