AF1210JR-070RL Equivalent & Substitute Parts

Part Overview

The AF1210JR-070RL is a 0 Ohms Jumper Chip Resistor in 1210 (3225 Metric) package manufactured by YAGEO. This component is a thick film jumper resistor with anti-sulfur properties and automotive AEC-Q200 qualification. The part is currently active in production with 957 pieces in stock. Equivalent and substitute parts are necessary when the primary part is unavailable, when alternative packaging formats are required for manufacturing processes, or when sourcing from multiple qualified manufacturers is needed for supply chain resilience.

Substiute Parts

AF1210JR-070RL

YAGEOIn Stock: 970AF1210JR-070RL Datasheet

Current PartRFQ

AC1210JR-070RL

YAGEOIn Stock: 5291AC1210JR-070RL Datasheet

MFR RecommendedRFQ

RC1210JR-070RL

YAGEOIn Stock: 4631RC1210JR-070RL Datasheet

MFR RecommendedRFQ

CRCW12100000Z0EA

Vishay DaleIn Stock: 160487CRCW12100000Z0EA Datasheet

MFR RecommendedRFQ

ERJ-S140R00U

Panasonic Electronic ComponentsIn Stock: 6103ERJ-S140R00U Datasheet

MFR RecommendedRFQ

RMCF1210ZT0R00

Stackpole Electronics IncIn Stock: 246297RMCF1210ZT0R00 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the AF1210JR-070RL is determined by the following critical parameters:

• Resistance Value: Must be 0 Ohms (jumper configuration)
• Package / Case: Must be 1210 (3225 Metric) for mechanical and electrical compatibility
• Number of Terminations: Must be 2 terminations
• Operating Temperature Range: Must support -55°C ~ 155°C minimum
• Composition: Thick film construction
• Compliance: RoHS3 compliance and REACH unaffected status required

All substitute parts listed meet these core electrical and mechanical parameters. Variations in packaging format (Tape & Reel vs. Cut Tape), manufacturer series designation, and specific feature sets (anti-sulfur, moisture resistant) do not affect functional equivalence when these primary parameters are matched.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts are functionally equivalent to the AF1210JR-070RL based on matching electrical specifications, package dimensions, and compliance certifications. Selection among these alternatives should be based on:

Packaging Format Compatibility: The AF1210JR-070RL, AC1210JR-070RL, ERJ-S140R00U, and RMCF1210ZT0R00 are supplied in Tape & Reel format, suitable for automated pick-and-place assembly. The RC1210JR-070RL and CRCW12100000Z0EA are available in Cut Tape & Digi-Reel format, appropriate for manual assembly or lower-volume production runs.

Automotive Qualification: All substitute parts carry AEC-Q200 automotive qualification except RC1210JR-070RL. For applications requiring automotive-grade components, AC1210JR-070RL, CRCW12100000Z0EA, ERJ-S140R00U, and RMCF1210ZT0R00 are qualified selections.

Inventory Availability: RMCF1210ZT0R00 (246,235 pcs), CRCW12100000Z0EA (160,380 pcs), and AC1210JR-070RL (5,200 pcs) offer the highest stock levels for immediate procurement.

Manufacturer Diversity: Sourcing from multiple manufacturers (YAGEO, Vishay Dale, Panasonic, Stackpole) provides supply chain flexibility and reduces single-source dependency risk.

Frequently Asked Questions (FAQ)

Q: Can RC1210JR-070RL be used as a direct replacement for AF1210JR-070RL in automotive applications?

A: RC1210JR-070RL is electrically and mechanically equivalent but does not carry AEC-Q200 automotive qualification. Use only in non-automotive applications or where automotive qualification is not required.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel packaging is optimized for high-speed automated assembly lines with continuous reel feeding. Cut Tape & Digi-Reel format is suitable for manual assembly, lower-volume production, or when component quantities are smaller than full reel quantities.

Q: Are all substitute parts ROHS3 compliant?

A: Yes, all listed substitute parts are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

Q: Do the substitute parts have identical physical dimensions?

A: All parts use the 1210 (3225 Metric) package. Minor dimensional variations exist: AF1210JR-070RL, AC1210JR-070RL, and RC1210JR-070RL measure 0.122" L x 0.102" W with 0.024" max height. CRCW12100000Z0EA, ERJ-S140R00U, and RMCF1210ZT0R00 measure 0.126" L x 0.098" W with 0.024" to 0.028" max height. These variations are within standard 1210 package tolerances and do not affect PCB layout compatibility.

Q: What is the Moisture Sensitivity Level (MSL) significance?

A: All parts are rated MSL 1 (Unlimited), indicating no moisture sensitivity restrictions. These components can be stored indefinitely without special moisture control measures and do not require baking before reflow soldering.