AF1206FR-07560RL Equivalent & Substitute Parts

Part Overview

The AF1206FR-07560RL is a 560 Ohm ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by YAGEO. This component features anti-sulfur coating and automotive AEC-Q200 qualification, making it suitable for automotive and industrial applications requiring enhanced reliability. The part is currently in active production status with 882 pieces available in stock.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when alternative packaging formats are required, or when design specifications allow for functionally compatible alternatives from different manufacturers that meet the same electrical and mechanical requirements.

Key Parameters

Parameter	Value
Resistance	560 Ohms
Tolerance	±1%
Power Rating	0.25W (1/4W)
Package / Case	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the AF1206FR-07560RL is determined by the following critical parameters:

Resistance Value: 560 Ohms (exact match required)
Tolerance: ±1% (exact match required)
Package / Case: 1206 (3216 Metric) (exact match required)
Power Rating: 0.25W minimum (higher ratings acceptable)
Composition: Thick Film
Temperature Coefficient: ±100ppm/°C
Operating Temperature Range: -55°C ~ 155°C minimum
RoHS Compliance: ROHS3 Compliant
Moisture Sensitivity Level: 1 (Unlimited)

All substitute parts listed meet these core electrical and mechanical parameters. Variations in manufacturer-specific features (such as anti-sulfur coating, moisture resistance, or pulse withstanding capability) do not affect functional substitutability when the above parameters are matched.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (Watts)	Package	Temp Coeff	Op. Temp Range	RoHS Status	MSL	Product Status	Packaging Type
AF1206FR-07560RL	YAGEO	560 Ω	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	ROHS3	1	Active	Tape & Reel
AC1206FR-07560RL	YAGEO	560 Ω	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	ROHS3	1	Active	Tape & Reel
RC1206FR-07560RL	YAGEO	560 Ω	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	ROHS3	1	Active	Cut Tape & Digi-Reel
CR1206-FX-5600ELF	Bourns Inc.	560 Ω	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	ROHS3	1	Active	Tape & Reel
CRCW1206560RFKEA	Vishay Dale	560 Ω	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	ROHS3	1	Active	Tape & Reel
CRCW1206560RFKEAHP	Vishay Dale	560 Ω	±1%	0.75W	1206	±100ppm/°C	-55°C ~ 155°C	ROHS3	1	Active	Tape & Reel
ERJ-8ENF5600V	Panasonic Electronic Components	560 Ω	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	ROHS3	1	Not For New Designs	Tape & Reel
KTR18EZPF5600	Rohm Semiconductor	560 Ω	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	ROHS3	1	Active	Tape & Reel

Engineering Selection Recommendations

Primary Substitutes (Active Status, Recommended for New Designs)

AC1206FR-07560RL, RC1206FR-07560RL, CR1206-FX-5600ELF, CRCW1206560RFKEA, and KTR18EZPF5600 are all suitable direct substitutes. These parts maintain active production status and meet all electrical and mechanical requirements of the AF1206FR-07560RL. Selection among these options should be based on packaging format availability (Tape & Reel versus Cut Tape & Digi-Reel) and supply chain considerations.

Higher Power Rating Alternative

CRCW1206560RFKEAHP provides 0.75W power rating in the same 1206 package. This part is suitable for applications where the original 0.25W specification allows for higher power dissipation capability without circuit modification.

Legacy Status

ERJ-8ENF5600V is marked as "Not For New Designs" and should be used only for replacement or repair of existing assemblies where continuity with original component specifications is required.

Frequently Asked Questions (FAQ)

Q: Can I substitute the AF1206FR-07560RL with any of the listed parts?

A: Yes, all listed parts meet the core electrical parameters (560 Ohms ±1%, 0.25W minimum, 1206 package, -55°C to 155°C operating range, ROHS3 compliance). Selection depends on packaging format availability and supply chain requirements.

Q: What is the difference between Tape & Reel and Cut Tape & Digi-Reel packaging?

A: Tape & Reel packaging is supplied on continuous tape for automated pick-and-place assembly. Cut Tape & Digi-Reel is supplied in smaller quantities on cut tape segments. Both formats contain identical components; packaging choice depends on production volume and assembly equipment compatibility.

Q: Can I use CRCW1206560RFKEAHP (0.75W) instead of the 0.25W AF1206FR-07560RL?

A: Yes. The 0.75W part is electrically and mechanically compatible. Higher power rating provides additional thermal margin and does not affect circuit operation when the original design calls for 0.25W or less.

Q: Why is ERJ-8ENF5600V marked "Not For New Designs"?

A: This designation indicates the manufacturer has discontinued active development for new applications. The part remains available for existing product support and repair. New designs should use active-status alternatives.

Q: Are all substitute parts AEC-Q200 qualified?

A: The AF1206FR-07560RL, AC1206FR-07560RL, CRCW1206560RFKEA, CRCW1206560RFKEAHP, ERJ-8ENF5600V, and KTR18EZPF5600 carry AEC-Q200 automotive qualification. RC1206FR-07560RL and CR1206-FX-5600ELF do not list AEC-Q200 in their specifications. Verify AEC-Q200 requirement for your application before selection.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message