AF0402DR-0710KL Equivalent & Substitute Parts

Part Overview

The AF0402DR-0710KL is a 10 kOhms ±0.5% thick film chip resistor in 0402 (1005 Metric) package manufactured by YAGEO. This component is an active product with automotive-grade qualification (AEC-Q200) and anti-sulfur properties, designed for applications requiring high precision and environmental durability. Substitute parts are identified when electrical specifications, mechanical dimensions, and compliance ratings remain within acceptable tolerances for direct board-level replacement.

Substiute Parts

AF0402DR-0710KL

YAGEOIn Stock: 1161AF0402DR-0710KL Datasheet

Current PartRFQ

RC0402DR-0710KL

YAGEOIn Stock: 78416RC0402DR-0710KL Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the AF0402DR-0710KL is determined by the following criteria:

• Resistance Value & Tolerance: Substitute must be 10 kOhms ±0.5%
• Power Rating: Substitute must be rated 0.063W (1/16W) minimum
• Package Specification: Substitute must be 0402 (1005 Metric) with compatible termination count (2 terminations)
• Composition: Substitute must be thick film construction
• Temperature Coefficient: Substitute must be ±100ppm/°C
• Operating Temperature: Substitute must support -55°C to 155°C range
• Compliance: Substitute must maintain ROHS3 compliance and MSL 1 rating
• Mechanical Compatibility: Substitute dimensions must not exceed seated height of 0.016" (0.40mm) maximum

The RC0402DR-0710KL meets all substitution criteria and is classified as an equivalent part.

Parameter Comparison

Engineering Selection Recommendations

Both the AF0402DR-0710KL and RC0402DR-0710KL are active products from YAGEO with identical electrical specifications and full ROHS3 compliance. The primary distinction is in environmental feature classification: the AF series includes automotive AEC-Q200 qualification with anti-sulfur properties, while the RC series features moisture-resistant construction. Selection between these parts should be based on application environment requirements. Both parts maintain compatible mechanical dimensions within PCB assembly tolerances and support identical operating temperature ranges. Inventory availability may also influence selection, as the RC0402DR-0710KL maintains significantly higher stock levels.

Frequently Asked Questions (FAQ)

Q: Can RC0402DR-0710KL replace AF0402DR-0710KL in automotive applications?

A: Both parts are manufactured by YAGEO and share identical electrical specifications (10 kOhms ±0.5%, 0.063W, ±100ppm/°C). The AF series carries AEC-Q200 automotive qualification with anti-sulfur properties, while the RC series provides moisture-resistant construction. Application requirements determine suitability; automotive-specific environments may require the AF series qualification.

Q: Are the physical dimensions compatible for PCB assembly?

A: Yes. Both parts use the 0402 (1005 Metric) package with 2 terminations. The seated height difference (0.015" vs 0.016" maximum) is within standard PCB assembly tolerances and does not affect placement or soldering processes.

Q: Do both parts meet RoHS compliance requirements?

A: Yes. Both AF0402DR-0710KL and RC0402DR-0710KL are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating, suitable for standard storage and handling conditions.

Q: What is the tolerance specification for these resistors?

A: Both parts are rated at ±0.5% tolerance, meeting precision requirements for applications requiring tight resistance value control.

Q: Are there any differences in temperature performance?

A: No. Both parts operate across -55°C to 155°C with identical temperature coefficient of ±100ppm/°C, ensuring consistent performance across the full operating range.