AF0201JR-0713RL Equivalent & Substitute Parts

Part Overview

The AF0201JR-0713RL is a 13 Ohms ±5% 0.05W chip resistor in 0201 package (0603 Metric) manufactured by YAGEO. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, designed for high-reliability applications in automotive and industrial environments. The part is currently active in production with 892 pieces in stock.

Substitute parts are identified to provide design flexibility, accommodate supply chain variations, and support component standardization across manufacturing operations.

Substiute Parts

AF0201JR-0713RL

YAGEOIn Stock: 909AF0201JR-0713RL Datasheet

Current PartRFQ

CRCW020113R0FNED

Vishay DaleIn Stock: 6872CRCW020113R0FNED Datasheet

MFR RecommendedRFQ

ERJ-1GNF13R0C

Panasonic Electronic ComponentsIn Stock: 10982ERJ-1GNF13R0C Datasheet

MFR RecommendedRFQ

ERJ-1GNJ130C

Panasonic Electronic ComponentsIn Stock: 68589ERJ-1GNJ130C Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

Primary Substitution Parameters:

• Resistance value: 13 Ohms (exact match required)
• Package type: 0201 (0603 Metric) (exact match required)
• Power rating: 0.05W, 1/20W (exact match required)
• Composition: Thick Film (exact match required)
• Temperature coefficient: ±200ppm/°C (exact match required)
• Operating temperature range: Minimum -55°C, maximum ≥125°C
• RoHS compliance: ROHS3 Compliant (required)
• Moisture sensitivity: MSL 1 (required)

Secondary Substitution Parameters:

• Tolerance: ±5% or tighter (±1% acceptable as superior specification)
• Manufacturer: Different manufacturers permitted if all primary parameters match

All substitute parts listed meet or exceed the primary substitution parameters of the AF0201JR-0713RL.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain full electrical and mechanical compatibility with the AF0201JR-0713RL. Selection among equivalent parts should be based on:

Tolerance Requirements: CRCW020113R0FNED and ERJ-1GNF13R0C offer ±1% tolerance, providing tighter resistance specification compared to the ±5% tolerance of the primary part and ERJ-1GNJ130C. Applications requiring higher precision should specify the ±1% variants.

Temperature Operating Range: CRCW020113R0FNED extends the maximum operating temperature to 155°C, compared to 125°C for other parts. This extended range is available for applications requiring higher thermal performance.

Availability: All parts maintain active production status with ROHS3 compliance and MSL 1 rating. Inventory levels vary across manufacturers, with ERJ-1GNJ130C offering the highest stock availability at 68,566 pieces.

Automotive Qualification: The primary part AF0201JR-0713RL carries AEC-Q200 automotive qualification. Substitute parts should be evaluated for specific automotive application requirements if AEC-Q200 certification is mandatory.

Frequently Asked Questions (FAQ)

Q: Can CRCW020113R0FNED replace AF0201JR-0713RL in all applications?

A: Yes. CRCW020113R0FNED meets all primary substitution parameters. The ±1% tolerance is tighter than the ±5% specification of AF0201JR-0713RL, making it functionally superior for precision applications. The extended operating temperature range to 155°C provides additional thermal margin.

Q: What is the difference between ERJ-1GNF13R0C and ERJ-1GNJ130C?

A: Both are Panasonic 0201 package 13 Ohm resistors with identical electrical and mechanical specifications except tolerance. ERJ-1GNF13R0C specifies ±1% tolerance, while ERJ-1GNJ130C specifies ±5% tolerance matching the primary part. Operating temperature ranges are identical at -55°C to 125°C.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts are ROHS3 compliant with MSL 1 moisture sensitivity rating, matching the environmental compliance of AF0201JR-0713RL.

Q: Can I use a substitute part with ±1% tolerance in place of a ±5% specification?

A: Yes. Tighter tolerance specifications are functionally compatible with applications designed for looser tolerances. The ±1% parts provide superior accuracy without compromising circuit performance.

Q: Does package size differ among these parts?

A: No. All parts use identical 0201 (0603 Metric) package with matching physical dimensions: 0.024" L x 0.012" W (0.60mm x 0.30mm) and maximum seated height of 0.010" (0.26mm).