ADTSM62RV Equivalent & Substitute Parts

Part Overview

The ADTSM62RV is an active-status tactile switch manufactured by APEM Inc., designed for surface mount applications requiring SPST-NO (Single Pole Single Throw - Normally Open) switching functionality. This component operates at 0.05A @ 12VDC with top-actuated, non-illuminated design and polyamide actuator construction. Finding equivalent substitute parts is necessary to ensure supply chain flexibility, manage inventory across multiple manufacturers, and maintain design continuity when primary sources experience availability constraints.

Substiute Parts

ADTSM62RV

APEM Inc.In Stock: 1130ADTSM62RV Datasheet

Current PartRFQ

95C06B4GWT

Grayhill Inc.In Stock: 80995C06B4GWT Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ADTSM62RV is determined by strict equivalence across the following critical parameters:

• Electrical Compatibility: Circuit configuration (SPST-NO), contact rating (0.05A @ 12VDC), and switch function (Off-Mom) must be identical
• Mechanical Compatibility: Surface mount mounting type, actuator height (5.00mm vertical), outline dimensions (6.20mm x 6.20mm), top actuator orientation, operating force (260gf), and switch travel (0.25mm) must match exactly
• Environmental & Compliance: Operating temperature range (-25°C ~ 70°C), actuator material (Polyamide/Nylon), RoHS3 compliance, and MSL rating (1) must be maintained
• Termination: Gull wing termination style must be consistent

The substitute part 95C06B4GWT from Grayhill Inc. meets all these criteria and qualifies as a direct equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both the ADTSM62RV and 95C06B4GWT are active-status components with full ROHS3 compliance and REACH unaffected status, making them suitable for current and future regulatory environments. Selection between these parts should be based on:

• Availability: ADTSM62RV has 1075 units in stock (Bulk packaging); 95C06B4GWT has 765 units in stock (Tube packaging)
• Packaging Format: Choose based on assembly process requirements—bulk packaging for high-volume automated lines, tube packaging for manual or lower-volume operations
• Supply Chain Strategy: Maintain dual-source qualification to mitigate single-manufacturer dependency
• Mechanical Life Data: 95C06B4GWT specifies 500,000 cycles mechanical life; ADTSM62RV does not provide this specification in available documentation

Both parts carry identical electrical and mechanical specifications, ensuring direct interchangeability in PCB designs without layout or schematic modifications.

Frequently Asked Questions (FAQ)

Q: Can 95C06B4GWT be used as a direct replacement for ADTSM62RV in existing designs?

A: Yes. Both parts are electrically and mechanically identical across all specified parameters: SPST-NO circuit, 0.05A @ 12VDC contact rating, 5.00mm actuator height, 6.20mm x 6.20mm outline, 260gf operating force, and 0.25mm switch travel. No design modifications are required.

Q: What is the difference between Bulk and Tube packaging?

A: Bulk packaging (ADTSM62RV) is typically used for high-volume automated assembly with tape-and-reel or loose component handling. Tube packaging (95C06B4GWT) is suited for manual assembly, lower-volume production, or component storage. Both contain the same electrical and mechanical component.

Q: Are both parts RoHS3 compliant?

A: Yes. Both ADTSM62RV and 95C06B4GWT are ROHS3 compliant with MSL rating 1 (unlimited moisture sensitivity level), suitable for standard PCB assembly and storage conditions.

Q: What operating temperature range should be considered for both parts?

A: Both parts operate across -25°C to 70°C. Design thermal management should ensure component operating temperature remains within this range under all specified application conditions.

Q: Is there a difference in mechanical life between these parts?

A: The 95C06B4GWT specifies 500,000 cycles mechanical life. The ADTSM62RV does not provide mechanical life data in the available specification. For applications requiring documented mechanical life ratings, the 95C06B4GWT provides this assurance.

Q: Can these parts be mixed in the same production batch?

A: Yes. Since both parts are electrically and mechanically identical, they can be used interchangeably within the same design and production batch. However, maintain clear component traceability in assembly documentation and bill of materials for quality and supply chain tracking purposes.