ADTSA61RV Equivalent & Substitute Parts

Part Overview

The ADTSA61RV is an active-status tactile switch manufactured by APEM Inc., designed for SPST-NO (Single Pole Single Throw - Normally Open) applications. This component operates at 0.05A @ 12VDC with side actuation and right-angle through-hole mounting. Finding equivalent and substitute parts is necessary to ensure design flexibility, manage supply chain continuity, and accommodate different packaging or performance requirements across production environments.

Substiute Parts

ADTSA61RV

APEM Inc.In Stock: 897ADTSA61RV Datasheet

Current PartRFQ

95C06B3RAT

Grayhill Inc.In Stock: 109895C06B3RAT Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ADTSA61RV is determined by the following critical parameters:

• Circuit Configuration: Must be SPST-NO
• Contact Rating: Must support 0.05A @ 12VDC minimum
• Mounting Type: Must be Through Hole, Right Angle
• Actuator Orientation: Must be Side Actuated
• Outline Dimensions: Must match 7.40mm x 6.55mm
• Termination Style: Must be PC Pin
• Operating Temperature Range: Must cover -25°C ~ 70°C
• Compliance: Must maintain ROHS3 compliance and MSL 1 rating

The substitute part 95C06B3RAT (Grayhill Inc.) meets all mandatory substitution criteria. Variations in actuator length (3.86mm vs. 3.15mm), operating force (160gf vs. 260gf), and additional features (tactile feedback, mechanical life specification) do not disqualify substitution when the core electrical and mechanical parameters align.

Parameter Comparison

Engineering Selection Recommendations

Both the ADTSA61RV and 95C06B3RAT are active-status components with identical ROHS3 compliance, REACH unaffected status, and MSL 1 ratings. Selection between these parts should be based on:

• Supply Chain Availability: ADTSA61RV has 864 units in stock; 95C06B3RAT has 1079 units in stock
• Packaging Format: ADTSA61RV is supplied in Bulk; 95C06B3RAT is supplied in Bag
• Actuator Length Tolerance: ADTSA61RV features 3.15mm actuator length; 95C06B3RAT features 3.86mm actuator length. PCB layout and mechanical clearance must accommodate the 0.71mm difference
• Operating Force Specification: ADTSA61RV specifies 260gf; 95C06B3RAT specifies 160gf. Application requirements for actuation force must be evaluated

Both parts maintain identical electrical ratings, temperature operating range, and regulatory compliance. Either part is suitable for direct substitution provided mechanical constraints are satisfied.

Frequently Asked Questions (FAQ)

Q: Can 95C06B3RAT replace ADTSA61RV in existing designs without PCB modification?

A: Electrical compatibility is confirmed. However, the actuator length difference (3.15mm vs. 3.86mm) may require mechanical clearance verification. PCB layout, enclosure design, and any mechanical constraints must be assessed before substitution.

Q: Are there differences in tactile feedback between these parts?

A: The 95C06B3RAT specifies tactile feedback as a feature with 160gf operating force. The ADTSA61RV specifies 260gf operating force. These differences may result in different user actuation experience. Application requirements for actuation force and feedback characteristics must be confirmed.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both parts are ROHS3 compliant, REACH unaffected, classified as EAR99, and share identical HTSUS codes. Moisture sensitivity level is 1 (Unlimited) for both parts.

Q: What is the difference between Bulk and Bag packaging?

A: Bulk packaging (ADTSA61RV) and Bag packaging (95C06B3RAT) represent different supply formats. Selection depends on inventory management practices, handling procedures, and quantity requirements for production workflows.

Q: Is mechanical life specification a factor in substitution?

A: The 95C06B3RAT specifies 1,000,000 cycles mechanical life. The ADTSA61RV does not provide this specification in the available data. If mechanical life is a critical design parameter, this specification must be obtained from APEM Inc. for the ADTSA61RV before final substitution decisions.