ADSP-H5E1 Equivalent & Substitute Parts

Part Overview

The ADSP-H5E1 is a single-character red 7-segment LED display module manufactured by Broadcom Limited. This component features a common anode configuration with 0.52" digit height, designed for numeric and alphanumeric display applications. The part is currently classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system support and new design implementations.

Substiute Parts

ADSP-H5E1

Broadcom LimitedIn Stock: 847ADSP-H5E1 Datasheet

Current PartRFQ

HDSP-H5E1

Broadcom LimitedIn Stock: 1207HDSP-H5E1 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ADSP-H5E1 is determined by strict equivalence across the following critical parameters:

• Display Type: 7-Segment configuration
• Number of Characters: Single character only
• Digit/Alpha Size: 0.52" (13.21mm)
• Common Pin Configuration: Common Anode
• Color: Red
• Voltage - Forward (Vf) Typical: 2V
• Current - Test: 20mA
• Package / Case: 10-DIP (0.600", 15.24mm)
• Physical Dimensions: 0.693" H x 0.488" W x 0.272" D

The HDSP-H5E1 meets all substitution criteria, maintaining identical electrical characteristics, mechanical form factor, and pin configuration. This part represents a direct functional equivalent suitable for replacement applications.

Parameter Comparison

Engineering Selection Recommendations

The HDSP-H5E1 is the direct equivalent substitute for the obsolete ADSP-H5E1. Both parts are manufactured by Broadcom Limited and maintain identical electrical and mechanical specifications across all critical parameters.

The HDSP-H5E1 carries active product status, ensuring continued availability and supply chain reliability. This part is ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for new designs and legacy system support.

Pin-for-pin compatibility and identical package geometry enable direct substitution without circuit board redesign or application firmware modification.

Frequently Asked Questions (FAQ)

Q: Can the HDSP-H5E1 replace the ADSP-H5E1 without circuit modifications?

A: Yes. Both parts share identical pin configurations, package geometry, and electrical characteristics. Direct substitution is supported without circuit board layout changes or signal routing modifications.

Q: What is the significance of the product status difference between these parts?

A: The ADSP-H5E1 is classified as obsolete, indicating discontinued manufacturing and limited availability. The HDSP-H5E1 maintains active status, ensuring reliable supply and ongoing manufacturer support.

Q: Are there compliance differences between these parts?

A: The HDSP-H5E1 is ROHS3 compliant and REACH unaffected. The ADSP-H5E1 compliance status is not specified in available documentation. For new designs and regulated applications, the HDSP-H5E1 is the appropriate selection.

Q: Do these parts require different drive circuits or current-limiting resistor values?

A: No. Both parts operate at identical forward voltage (2V typical) and test current (20mA). Existing drive circuit designs and resistor calculations remain valid for substitution.

Q: Is the 10-DIP package footprint identical between these parts?

A: Yes. Both parts use the 10-DIP (0.600", 15.24mm) package with identical physical dimensions of 0.693" H x 0.488" W x 0.272" D. PCB footprints and mechanical mounting are fully compatible.