ADS8318IBDRCR Equivalent & Substitute Parts

Part Overview

The ADS8318IBDRCR is a 16-bit Analog to Digital Converter manufactured by Texas Instruments, part of the microPOWER™ series. This device features a single differential input with a 500 kSPS sampling rate and operates using a Successive Approximation Register (SAR) architecture with external reference configuration. The part is packaged in a 10-VSON (3x3) form factor suitable for surface mount applications.

The ADS8318IBDRCR is classified as Obsolete. Identifying equivalent and substitute parts is necessary to ensure design continuity, maintain supply chain reliability, and support ongoing production requirements for applications utilizing this data acquisition component.

Key Parameters

Parameter	Value
Resolution (Bits)	16
Sampling Rate	500 kSPS
Number of Inputs	1
Input Type	Differential
Data Interface	SPI
Architecture	SAR
Reference Type	External
Analog Supply Voltage	5V
Digital Supply Voltage	2.375V ~ 5.5V
Operating Temperature Range	-40°C ~ 85°C
Package Type	10-VFDFN Exposed Pad
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitute parts for the ADS8318IBDRCR are classified based on strict adherence to the following electrical and mechanical parameters:

Primary Substitution Criteria:

Resolution: 16 bits
Sampling Rate: 500 kSPS (or compatible rate)
Input Configuration: Single differential input
Data Interface: SPI compatible
Architecture: SAR
Reference Type: External
Operating Temperature: -40°C ~ 85°C
RoHS Compliance: ROHS3 Compliant

Package Considerations: Substitutes may differ in package type (10-VSON vs. 10-VSSOP vs. 10-LFCSP-WD) while maintaining electrical equivalence. Package selection depends on PCB layout requirements and manufacturing capabilities.

Supply Voltage Compatibility: The ADS8318IBDRCR requires 5V analog supply. Substitutes must support this voltage requirement or operate within compatible ranges.

Parameter Comparison

Parameter	ADS8318IBDRCR	ADS8318IBDGSR	ADS8318IBDRCT	ADS8318IDRCT	AD7687BCPZRL7	AD7688BCPZRL7
Manufacturer	Texas Instruments	Texas Instruments	Texas Instruments	Texas Instruments	Analog Devices Inc.	Analog Devices Inc.
Resolution (Bits)	16	16	16	16	16	16
Sampling Rate (kSPS)	500	500	500	500	250	500
Number of Inputs	1	1	1	1	1	1
Input Type	Differential	Differential	Differential	Differential	Differential	Differential
Data Interface	SPI	SPI	SPI	SPI	SPI, DSP	SPI, DSP
Architecture	SAR	SAR	SAR	SAR	SAR	SAR
Reference Type	External	External	External	External	External	External
Analog Supply Voltage	5V	5V	5V	5V	2.3V ~ 5.5V	5V
Digital Supply Voltage	2.375V ~ 5.5V	2.375V ~ 5.5V	2.375V ~ 5.5V	2.375V ~ 5.5V	2.3V ~ 5.5V	5V
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C
Package / Case	10-VFDFN Exposed Pad	10-TFSOP, 10-MSOP	10-VFDFN Exposed Pad	10-VFDFN Exposed Pad	10-VFDFN Exposed Pad, CSP	10-VFDFN Exposed Pad, CSP
Product Status	Obsolete	Active	Active	Active	Active	Active
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
MSL Rating	3 (168 Hours)	2 (1 Year)	3 (168 Hours)	3 (168 Hours)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

Texas Instruments ADS8318 Series (Recommended for Direct Replacement):

ADS8318IBDGSR is the manufacturer-recommended substitute. This part maintains identical electrical specifications (16-bit, 500 kSPS, differential input, SPI interface, external reference) and operates within the same temperature range. The primary difference is packaging: ADS8318IBDGSR uses 10-TFSOP/10-MSOP form factor versus the original 10-VSON. This part is Active status with improved MSL rating (2 vs. 3), ensuring better long-term reliability and availability.

ADS8318IBDRCT and ADS8318IDRCT are parametric equivalents with identical electrical specifications and the same 10-VSON package as the original part. Both are Active status. These parts differ only in packaging format (Tape & Reel) and are suitable for high-volume production environments.

Analog Devices PulSAR® Series (Cross-Manufacturer Alternative):

AD7688BCPZRL7 provides full electrical equivalence with 16-bit resolution, 500 kSPS sampling rate, and identical operating temperature range. This part is Active status with superior MSL rating (1 vs. 3). The 10-LFCSP-WD package is compatible with the original 10-VFDFN footprint. Supply voltage specifications are fixed at 5V for both analog and digital rails, which aligns with the original design requirements.

AD7687BCPZRL7 is an alternative from Analog Devices with identical resolution and differential input configuration. However, the sampling rate is 250 kSPS, which is half the original specification. This part is suitable only if the application does not require 500 kSPS performance. Analog supply voltage range is broader (2.3V ~ 5.5V), offering additional design flexibility.

Selection Criteria:

For direct replacement with minimal PCB redesign: ADS8318IBDGSR
For identical package compatibility: ADS8318IBDRCT or ADS8318IDRCT
For cross-manufacturer equivalence with improved reliability: AD7688BCPZRL7
For reduced sampling rate applications: AD7687BCPZRL7

All recommended substitutes are ROHS3 compliant and operate within the -40°C ~ 85°C temperature range, ensuring regulatory and environmental compliance.

Frequently Asked Questions (FAQ)

Q: Can ADS8318IBDGSR replace ADS8318IBDRCR without circuit modification?

A: ADS8318IBDGSR is electrically equivalent and maintains all critical specifications (16-bit, 500 kSPS, differential input, SPI interface, external reference, -40°C ~ 85°C operation). The primary difference is package type: ADS8318IBDGSR uses 10-TFSOP/10-MSOP versus the original 10-VSON. PCB layout modification is required to accommodate the different package footprint. Pin configuration and signal timing remain compatible.

Q: What is the difference between ADS8318IBDRCT and ADS8318IDRCT?

A: Both parts are parametric equivalents with identical electrical specifications and the same 10-VSON package. The difference lies in the device grade designation within the part number. Both are Active status and suitable for production use. Selection between these parts depends on inventory availability and supplier preference.

Q: Is AD7687BCPZRL7 a suitable replacement for applications requiring 500 kSPS?

A: No. AD7687BCPZRL7 operates at 250 kSPS, which is half the sampling rate of the ADS8318IBDRCR. This part is suitable only for applications where the reduced sampling rate meets performance requirements. For applications requiring 500 kSPS performance, use AD7688BCPZRL7 or the Texas Instruments ADS8318 variants.

Q: What are the package compatibility considerations?

A: The original ADS8318IBDRCR uses 10-VFDFN Exposed Pad packaging. ADS8318IBDGSR uses 10-TFSOP/10-MSOP, requiring PCB redesign. AD7687BCPZRL7 and AD7688BCPZRL7 use 10-LFCSP-WD, which is footprint-compatible with 10-VFDFN. Verify PCB layout and thermal management requirements before selecting a substitute with different packaging.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts (ADS8318IBDGSR, ADS8318IBDRCT, ADS8318IDRCT, AD7687BCPZRL7, AD7688BCPZRL7) are ROHS3 compliant, meeting regulatory requirements for hazardous substance restrictions.

Q: What is the significance of MSL (Moisture Sensitivity Level) ratings?

A: MSL rating indicates moisture sensitivity during storage and handling. ADS8318IBDRCR has MSL 3 (168 hours), requiring controlled storage conditions. ADS8318IBDGSR has MSL 2 (1 year), offering improved storage flexibility. AD7687BCPZRL7 and AD7688BCPZRL7 have MSL 1 (unlimited), requiring no special moisture control. Higher MSL ratings reduce handling risk and improve supply chain reliability.

Q: Can AD7688BCPZRL7 operate with the same power supply configuration as ADS8318IBDRCR?

A: Yes. AD7688BCPZRL7 requires fixed 5V for both analog and digital supplies, which aligns with the ADS8318IBDRCR design. The original part specifies 5V analog and 2.375V ~ 5.5V digital; AD7688BCPZRL7 operates at 5V for both rails, which is within the compatible range and simplifies power distribution design.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message