ADS7866IDBVR Equivalent & Substitute Parts

Part Overview

The ADS7866IDBVR is a 12-bit Analog to Digital Converter manufactured by Texas Instruments, designed for single-ended input applications with a 200 kSPS sampling rate. This microPOWER™ series device operates across a supply voltage range of 1.2V to 3.6V and is housed in a SOT-23-6 surface mount package. The part is currently active and in production, with 22,200 units in stock.

Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained within the specified parameter tolerances. Alternative devices may be required due to supply constraints, design optimization, or application-specific performance requirements.

Key Parameters

Parameter	ADS7866IDBVR
Number of Bits	12
Sampling Rate (Per Second)	200k
Number of Inputs	1
Input Type	Single Ended
Data Interface	SPI
Architecture	SAR
Reference Type	External
Voltage - Supply, Analog	1.2V ~ 3.6V
Voltage - Supply, Digital	1.2V ~ 3.6V
Operating Temperature	-40°C ~ 85°C
Package / Case	SOT-23-6
Mounting Type	Surface Mount
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	2 (1 Year)

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following critical parameters:

12-bit resolution (fixed requirement)
Single-ended input configuration (fixed requirement)
SOT-23-6 package form factor (fixed requirement)
SPI data interface compatibility (fixed requirement)
SAR architecture (fixed requirement)
Surface mount mounting type (fixed requirement)
Operating temperature range compatibility
Supply voltage range compatibility
Sampling rate capability (equal to or greater than 200 kSPS)

Substitute parts are grouped into three categories based on sampling rate performance: 200 kSPS equivalents, 500 kSPS to 1 MSPS devices, and 3 MSPS high-speed variants. All substitute parts maintain the core 12-bit single-ended SAR ADC architecture with SPI interface in SOT-23-6 packaging.

Parameter Comparison

Part Number	Manufacturer	Bits	Sampling Rate	Supply Voltage (Analog)	Supply Voltage (Digital)	Operating Temp	Reference Type	Data Interface	Package	Inventory
ADS7866IDBVR	Texas Instruments	12	200k	1.2V ~ 3.6V	1.2V ~ 3.6V	-40°C ~ 85°C	External	SPI	SOT-23-6	22,200
AD7466BRTZ-REEL7	Analog Devices Inc.	12	200k	1.6V ~ 3.6V	1.6V ~ 3.6V	-40°C ~ 85°C	Supply	SPI, DSP	SOT-23-6	1,405
LTC2362HS6#TRMPBF	Analog Devices Inc.	12	500k	2.35V ~ 3.6V	2.35V ~ 3.6V	-40°C ~ 125°C	External	SPI	TSOT-23-6	743
LTC2362IS6#TRMPBF	Analog Devices Inc.	12	500k	2.35V ~ 3.6V	2.35V ~ 3.6V	-40°C ~ 85°C	External	SPI	TSOT-23-6	1,117
LTC2365CS6#TRMPBF	Linear Technology	12	1M	2.35V ~ 3.6V	2.35V ~ 3.6V	0°C ~ 70°C	External	SPI	TSOT-23-6	1,027
LTC2365HS6#TRMPBF	Analog Devices Inc.	12	1M	2.35V ~ 3.6V	2.35V ~ 3.6V	-40°C ~ 125°C	External	SPI	TSOT-23-6	2,100
LTC2365IS6#TRMPBF	Analog Devices Inc.	12	1M	2.35V ~ 3.6V	2.35V ~ 3.6V	-40°C ~ 85°C	External	SPI	TSOT-23-6	2,200
LTC2366CS6#TRMPBF	Analog Devices Inc.	12	3M	2.35V ~ 3.6V	2.35V ~ 3.6V	0°C ~ 70°C	External	SPI	TSOT-23-6	50,400
LTC2366HS6#TRMPBF	Analog Devices Inc.	12	3M	2.35V ~ 3.6V	2.35V ~ 3.6V	-40°C ~ 125°C	External	SPI	TSOT-23-6	3,789
LTC2366IS6#TRMPBF	Analog Devices Inc.	12	3M	2.35V ~ 3.6V	2.35V ~ 3.6V	-40°C ~ 85°C	External	SPI	TSOT-23-6	1,581

Engineering Selection Recommendations

Direct Equivalent (200 kSPS Category): AD7466BRTZ-REEL7 provides functional equivalence at the same 200 kSPS sampling rate. This part maintains 12-bit resolution, single-ended input, and SPI interface compatibility. The minimum supply voltage requirement increases to 1.6V, which may require circuit design consideration for ultra-low voltage applications. Both parts are ROHS3 compliant and active in production.

Higher Performance Alternatives (500 kSPS to 3 MSPS): LTC2362HS6#TRMPBF, LTC2362IS6#TRMPBF, LTC2365 series, and LTC2366 series devices offer increased sampling rates while maintaining 12-bit resolution and SPI interface. These parts require minimum supply voltages of 2.35V, restricting use in applications below this threshold. All substitute parts are ROHS3 compliant and active in production. The LTC2366 series offers the highest sampling rate at 3 MSPS with the largest inventory availability (50,400 units for LTC2366CS6#TRMPBF).

Temperature Range Considerations: The ADS7866IDBVR operates from -40°C to 85°C. LTC2362HS6#TRMPBF, LTC2365HS6#TRMPBF, and LTC2366HS6#TRMPBF extend the upper operating temperature to 125°C, suitable for industrial applications. LTC2365CS6#TRMPBF and LTC2366CS6#TRMPBF operate from 0°C to 70°C, restricting use in extended temperature environments.

Packaging Consideration: AD7466BRTZ-REEL7 uses standard SOT-23-6 packaging. All LTC series substitutes use TSOT-23-6 (thin variant), which maintains the same footprint and pin configuration but with reduced height. This is mechanically compatible with standard SOT-23-6 PCB layouts.

Frequently Asked Questions (FAQ)

Q: Can LTC2366 series parts directly replace the ADS7866IDBVR? A: LTC2366 devices are mechanically and electrically compatible in SOT-23-6 footprint with SPI interface and 12-bit resolution. However, the minimum supply voltage increases from 1.2V to 2.35V. Applications operating below 2.35V require the ADS7866IDBVR or AD7466BRTZ-REEL7. The higher 3 MSPS sampling rate of LTC2366 is backward compatible with designs requiring 200 kSPS operation.

Q: What is the difference between TSOT-23-6 and SOT-23-6 packaging? A: TSOT-23-6 is the thin variant of SOT-23-6, maintaining identical pin configuration and PCB footprint but with reduced package height. Both are surface mount packages suitable for the same board layouts. No design changes are required for substitution between these package types.

Q: Is AD7466BRTZ-REEL7 a true 1:1 replacement for ADS7866IDBVR? A: AD7466BRTZ-REEL7 matches the ADS7866IDBVR in sampling rate (200 kSPS), resolution (12-bit), package (SOT-23-6), and interface (SPI). The primary difference is the reference type: AD7466BRTZ-REEL7 uses supply reference while ADS7866IDBVR uses external reference. Minimum supply voltage increases from 1.2V to 1.6V. Circuit design must accommodate these differences.

Q: Which substitute part has the best inventory availability? A: LTC2366CS6#TRMPBF offers the highest inventory with 50,400 units in stock, followed by LTC2366HS6#TRMPBF with 3,789 units. The direct 200 kSPS equivalent AD7466BRTZ-REEL7 has 1,405 units available.

Q: Can I use a higher sampling rate part in a design specified for 200 kSPS? A: Yes. Higher sampling rate devices operate at reduced rates without performance degradation. A 3 MSPS ADC can be configured for 200 kSPS operation. However, verify that the minimum supply voltage requirement (2.35V for LTC series) is compatible with your power supply design.

Q: Are all substitute parts RoHS3 compliant? A: All listed substitute parts are ROHS3 compliant and REACH unaffected, matching the compliance status of the ADS7866IDBVR.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message