ADQ13Q006 Equivalent & Substitute Parts

Part Overview

The ADQ13Q006 is a general purpose relay manufactured by Panasonic Electric Works, featuring a SPST-NO (1 Form A) contact configuration with a 6VDC coil. This through-hole mounted relay is rated for 30A at 250VAC maximum switching voltage and is designed for general industrial switching applications. The part is currently obsolete, making identification of suitable substitute components essential for system maintenance, repair, and redesign efforts.

Substiute Parts

ADQ13Q006

Panasonic Electric WorksIn Stock: 938ADQ13Q006 Datasheet

Current PartRFQ

ADZS12105

Panasonic Electric WorksIn Stock: 1123ADZS12105 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ADQ13Q006 is determined by the following critical parameters:

Contact Configuration: Both the main part and substitute must maintain SPST-NO (1 Form A) contact form to ensure identical switching logic and circuit compatibility.

Coil Type: Both parts feature latching, single-coil operation, ensuring equivalent control signal requirements.

Contact Material: Silver Tin Oxide (AgSnO) contact material is consistent across both parts, maintaining equivalent electrical performance and reliability characteristics.

Coil Insulation and Seal Rating: The ADQ13Q006 is fully sealed; substitute parts must provide equivalent environmental protection for the intended application environment.

Electrical Performance Tolerance: Substitutes must operate within the specified voltage and current ranges. The ADQ13Q006 operates at 6VDC with a must-operate voltage of 4.2VDC and a coil current of 83.3mA. Substitute parts may have different coil voltages and currents but must be compatible with available power supply infrastructure.

Mounting and Termination: The ADQ13Q006 uses through-hole PC pin quick-connect termination. Substitutes with different mounting types (such as chassis mount) or termination styles (such as screw terminals) require circuit board redesign and are considered design changes rather than direct substitutions.

Parameter Comparison

Engineering Selection Recommendations

The ADZS12105 is listed as an active product with current manufacturing status, whereas the ADQ13Q006 is obsolete. Both parts are manufactured by Panasonic Electric Works and share identical contact configuration (SPST-NO), coil type (latching, single coil), and contact material (Silver Tin Oxide).

The ADZS12105 provides superior electrical performance with higher current rating (90A versus 30A), higher switching voltage capability (276VAC versus 250VAC), and extended operating temperature range (-40°C to 85°C versus -40°C to 65°C). Both parts maintain equivalent compliance status with RoHS and identical export classification (EAR99).

Critical differences exist in mounting type and termination style. The ADQ13Q006 uses through-hole PC pin quick-connect termination, while the ADZS12105 uses chassis mount with screw terminals. This difference requires circuit board redesign and is not a direct pin-for-pin substitution. Additionally, the coil voltage differs (6VDC versus 5VDC) and coil current requirement increases (83.3mA versus 300mA), necessitating power supply verification.

Selection of the ADZS12105 is appropriate only when circuit board redesign is feasible and power supply infrastructure can accommodate the 5VDC coil voltage and increased current draw.

Frequently Asked Questions (FAQ)

Q: Can the ADZS12105 be used as a direct replacement for the ADQ13Q006 without circuit modification?

A: No. The ADZS12105 has different mounting type (chassis mount versus through hole), different termination style (screw terminal versus PC pin quick connect), and different coil voltage (5VDC versus 6VDC). Circuit board redesign is required.

Q: What are the key compatibility criteria for substituting the ADQ13Q006?

A: Substitute parts must maintain SPST-NO (1 Form A) contact configuration, latching single-coil operation, and Silver Tin Oxide contact material. Coil voltage, current rating, and switching voltage must be compatible with the application circuit and power supply infrastructure.

Q: Does the ADZS12105 provide equivalent switching performance?

A: The ADZS12105 provides superior switching performance with higher current rating (90A versus 30A) and higher maximum switching voltage (276VAC versus 250VAC). Operate and release times are identical (20ms each). The higher performance rating makes it suitable for applications requiring greater switching capacity.

Q: What is the impact of the different coil voltage (5VDC versus 6VDC)?

A: The coil voltage difference requires a different power supply or voltage regulation circuit. The ADZS12105 must operate voltage is 4.6VDC, compared to 4.2VDC for the ADQ13Q006. Verification of available coil voltage supply is mandatory before selection.

Q: Are both parts RoHS compliant?

A: Yes. The ADQ13Q006 is RoHS Compliant, and the ADZS12105 is ROHS3 Compliant. Both parts meet current environmental compliance requirements.

Q: What is the significance of the different coil resistance values?

A: The ADQ13Q006 has 72 Ohms coil resistance, while the ADZS12105 has 16.7 Ohms. This difference reflects the different coil voltage and current requirements. The lower resistance of the ADZS12105 is consistent with its 5VDC, 300mA coil specification.