ADP5170 Equivalent & Substitute Parts

Part Overview

The ADP5170 is an active pressure sensor manufactured by Panasonic Electronic Components, designed for board mount applications requiring vented gauge pressure measurement. This 6-DIP module sensor outputs analog voltage signals proportional to applied pressure, with integrated amplification and temperature compensation. The part is currently in active production status with 649 units available in inventory. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are required for design flexibility, supply chain continuity, or inventory optimization.

Substiute Parts

ADP5170

Panasonic Electronic ComponentsIn Stock: 729ADP5170 Datasheet

Current PartRFQ

ADP5171

Panasonic Electronic ComponentsIn Stock: 975ADP5171 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ADP5170 are identified based on strict electrical and mechanical parameter equivalence within the PS-A series. The substitution criteria are:

• Operating pressure rating: 145.04 PSI (1000 kPa)
• Output voltage range: 0 V ~ 4.5 V
• Accuracy specification: ±1.25%
• Supply voltage: 5V
• Port configuration: Male - 0.12" (3mm) Tube, Barbless
• Package type: 6-DIP Module with PC Pin termination
• Pressure measurement type: Vented Gauge
• Temperature operating range: -10°C ~ 60°C
• Features: Amplified Output and Temperature Compensated

The ADP5171 meets all these criteria and is classified as a parametric equivalent. Both parts share identical electrical performance specifications, mechanical interfaces, and environmental operating conditions, making them directly interchangeable in applications requiring these exact parameters.

Parameter Comparison

Engineering Selection Recommendations

Both ADP5170 and ADP5171 are active production parts from Panasonic Electronic Components with identical ROHS3 compliance and REACH unaffected status. Selection between these parts should be based on availability and inventory considerations. The ADP5170 has 649 units in stock, while the ADP5171 has 929 units available. Both parts meet all regulatory requirements for industrial and commercial pressure sensing applications. No technical differentiation exists between these parts; they are direct functional equivalents suitable for interchangeable use in circuit designs requiring 145.04 PSI vented gauge pressure measurement with 0 V ~ 4.5 V analog output.

Frequently Asked Questions (FAQ)

Q: Can ADP5171 be used as a direct replacement for ADP5170?

A: Yes. Both parts are parametric equivalents with identical electrical specifications, output characteristics, pressure ratings, and mechanical interfaces. No circuit modifications are required for substitution.

Q: Are there any differences in the 6-DIP module pinout between these parts?

A: No differences are specified in the provided parameters. Both parts use identical PC Pin termination in a 6-DIP Module package with through-hole mounting.

Q: Do both parts support the same operating temperature range?

A: Yes. Both ADP5170 and ADP5171 operate across -10°C to 60°C with identical temperature compensation features.

Q: What is the pressure measurement range for these sensors?

A: Both sensors are rated for 145.04 PSI (1000 kPa) operating pressure with a maximum pressure rating of 217.56 PSI (1500 kPa). They measure vented gauge pressure.

Q: Are both parts RoHS compliant?

A: Yes. Both ADP5170 and ADP5171 are ROHS3 compliant with Moisture Sensitivity Level 1 (Unlimited), suitable for standard PCB assembly processes.

Q: What output voltage range should be expected from these sensors?

A: Both parts provide 0 V ~ 4.5 V analog voltage output with ±1.25% accuracy when supplied with 5V power.

Q: Can these sensors be used interchangeably in existing designs?

A: Yes. No design changes are necessary. Both parts are direct functional equivalents with identical specifications for pressure measurement, output characteristics, and environmental operating conditions.