ADP5110 Equivalent & Substitute Parts

Part Overview

The ADP5110 is a vacuum pressure sensor manufactured by Panasonic Electronic Components, designed for board mount applications. This 6-DIP module sensor measures negative gauge pressure from -14.5 PSI (-100 kPa) with an analog voltage output range of 0 V to 4.5 V. The sensor features amplified output and temperature compensation, operating across -10°C to 60°C. The ADP5110 is an active product with full RoHS3 compliance and REACH unaffected status. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are maintained across all critical operating parameters.

Substiute Parts

ADP5110

Panasonic Electronic ComponentsIn Stock: 874ADP5110 Datasheet

Current PartRFQ

ADP5111

Panasonic Electronic ComponentsIn Stock: 1032ADP5111 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The ADP5111 qualifies as a parametric equivalent to the ADP5110 based on strict alignment across all critical electrical and mechanical parameters. Substitution is valid when the following parameters match identically:

• Pressure Type: Vacuum
• Operating Pressure: -14.5 PSI (-100 kPa)
• Maximum Pressure: -29.01 PSI (-200 kPa)
• Output Type: Analog Voltage
• Output Range: 0 V ~ 4.5 V
• Accuracy: ±1.25%
• Supply Voltage: 5V
• Port Size: Male - 0.12" (3mm) Tube
• Port Style: Barbless
• Features: Amplified Output, Temperature Compensated
• Termination Style: PC Pin
• Operating Temperature: -10°C ~ 60°C
• Mounting Type: Through Hole
• Package / Case: 6-DIP Module
• Series: PS-A

The ADP5111 maintains identical specifications across all parameters, confirming direct substitutability in applications requiring the ADP5110.

Parameter Comparison

Engineering Selection Recommendations

Both the ADP5110 and ADP5111 are active products from Panasonic Electronic Components with identical RoHS3 compliance and REACH unaffected status. Selection between these parts should be based on availability and inventory considerations. The ADP5110 has 817 pieces in stock, while the ADP5111 has 1015 pieces available. Both parts meet all regulatory requirements for deployment in equivalent applications. No technical differentiation exists between these components based on provided specifications.

Frequently Asked Questions (FAQ)

Q: Can the ADP5111 directly replace the ADP5110 in existing designs?

A: Yes. The ADP5111 is a parametric equivalent with identical electrical performance, pressure range, output characteristics, and mechanical compatibility. No circuit modifications or recalibration are required.

Q: Are there any differences in the 6-DIP module pinout between ADP5110 and ADP5111?

A: Based on provided specifications, both parts use identical PC Pin termination in a 6-DIP Module package. Pinout compatibility is maintained.

Q: Do both parts meet the same environmental and compliance standards?

A: Yes. Both the ADP5110 and ADP5111 are ROHS3 compliant, REACH unaffected, and carry MSL 1 (Unlimited) moisture sensitivity rating.

Q: What is the pressure measurement range for both sensors?

A: Both sensors operate at -14.5 PSI (-100 kPa) with a maximum pressure rating of -29.01 PSI (-200 kPa), measuring vacuum pressure with ±1.25% accuracy.

Q: Are there any temperature operating differences between these parts?

A: No. Both parts operate across the identical temperature range of -10°C to 60°C with temperature compensation features.

Q: Which part should be selected based on availability?

A: Selection should be based on project timeline and inventory requirements. The ADP5111 currently has higher inventory (1015 pieces) compared to the ADP5110 (817 pieces).