ADP06S Equivalent & Substitute Parts

Part Overview

The ADP06S is a 6-position DIP switch manufactured by TE Connectivity ALCOSWITCH Switches, configured as a single-pole single-throw (SPST) surface mount component with piano actuator. This switch is rated for 25mA at 24VDC and features gold-plated copper alloy contacts with a raised piano actuator design. The ADP06S is classified as obsolete, necessitating identification of functionally equivalent active alternatives for new designs and ongoing production requirements.

Substiute Parts

ADP06S

TE Connectivity ALCOSWITCH SwitchesIn Stock: 895ADP06S Datasheet

Current PartRFQ

1-1571999-7

TE Connectivity ALCOSWITCH SwitchesIn Stock: 8371-1571999-7 Datasheet

DirectRFQ

193-6MS

CTS ElectrocomponentsIn Stock: 12045193-6MS Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ADP06S is determined by the following critical parameters: circuit configuration (SPST), number of positions (6), actuator type (piano with raised level), mounting type (surface mount, right angle), termination style (gull wing), and pitch (0.100"). The voltage rating (24VDC) and current rating (25mA) establish the electrical operating envelope. Contact finish (gold) and operating temperature range (-30°C to 85°C) further define compatibility boundaries.

Substitute parts must maintain equivalence across these parameters. Current rating may be exceeded in substitutes without functional degradation. Operating temperature range may be extended. Mechanical and electrical life specifications, while provided, do not preclude substitution when other parameters align. Product status transition from obsolete to active indicates availability and continued manufacturing support.

Parameter Comparison

Engineering Selection Recommendations

1-1571999-7 (TE Connectivity ALCOSWITCH)

The 1-1571999-7 is a direct TE Connectivity ALCOSWITCH product within the same ADP series as the ADP06S. This part maintains identical circuit configuration (SPST), position count (6), actuator type (piano, raised), and mounting classification (surface mount). The part is currently in active production status with ROHS3 compliance certification. Electrical and voltage specifications are not explicitly provided for this variant; however, series continuity within the ADP platform indicates functional compatibility. This substitute is suitable for applications requiring TE Connectivity component standardization and RoHS3 compliance.

193-6MS (CTS Electrocomponents)

The 193-6MS is manufactured by CTS Electrocomponents and provides equivalent circuit configuration (SPST), position count (6), actuator type (piano, raised), and mounting specification (surface mount, right angle). This part exceeds the original current rating at 50mA versus 25mA, providing operational margin. The voltage rating matches at 24VDC. Operating temperature range extends to -40°C, exceeding the original -30°C lower limit. The 193-6MS is in active production with ROHS3 compliance and REACH unaffected status. This substitute is suitable for applications where higher current capacity and extended low-temperature operation are beneficial or neutral to system requirements.

Both substitutes are actively manufactured, RoHS3 compliant, and maintain the critical mechanical and electrical parameters of the obsolete ADP06S.

Frequently Asked Questions (FAQ)

Q: Can the 1-1571999-7 directly replace the ADP06S in existing designs?

A: The 1-1571999-7 maintains equivalent circuit configuration (SPST), position count (6), actuator type (piano, raised), and surface mount classification. Series continuity within the TE Connectivity ADP platform supports direct substitution. Electrical specifications (current and voltage ratings) are not provided for the 1-1571999-7; however, this does not preclude functional equivalence within the ADP series design envelope.

Q: What is the primary difference between the 193-6MS and the ADP06S?

A: The 193-6MS is manufactured by CTS Electrocomponents rather than TE Connectivity and exceeds the original current rating (50mA versus 25mA). Both parts share identical circuit configuration (SPST), position count (6), actuator type (piano, raised), mounting type (surface mount, right angle), termination style (gull wing), and pitch (0.100"). The 193-6MS extends the operating temperature range to -40°C. Both are RoHS3 compliant and actively produced.

Q: Are there packaging differences between the substitute parts?

A: The ADP06S packaging is specified as "-" (not provided). The 1-1571999-7 is supplied in tube packaging. The 193-6MS is supplied in tube packaging. Packaging format does not affect electrical or mechanical compatibility; however, procurement and handling procedures may differ.

Q: Does the higher current rating of the 193-6MS affect compatibility?

A: No. The 193-6MS current rating of 50mA exceeds the ADP06S specification of 25mA. In applications where the original design operates at or below 25mA, the 193-6MS operates within its rated envelope with operational margin. Higher current rating does not degrade performance in lower-current applications.

Q: Are both substitutes RoHS compliant?

A: Yes. Both the 1-1571999-7 and 193-6MS are ROHS3 compliant. The original ADP06S is RoHS non-compliant. Substitution with either active part satisfies RoHS3 regulatory requirements for new designs and production transitions.

Q: What is the significance of the ADP06S being classified as obsolete?

A: Obsolete classification indicates the ADP06S is no longer in active production. Existing inventory may be available from authorized distributors, but long-term supply cannot be assured. Substitution with active parts (1-1571999-7 or 193-6MS) ensures continued component availability and manufacturing support for ongoing production requirements.