ADN4665ARUZ Equivalent & Substitute Parts

Part Overview

The ADN4665ARUZ is an active LVDS (Low-Voltage Differential Signaling) driver IC manufactured by Analog Devices Inc. This interface component provides 4 drivers and 0 receivers in a 16-TSSOP surface mount package, operating at data rates up to 400 Mbps. The device is classified as Active product status and is ROHS3 compliant. Substitute parts are identified when equivalent electrical specifications, mechanical compatibility, and regulatory certifications align with the original component, enabling direct replacement in circuit designs without functional degradation.

Substiute Parts

ADN4665ARUZ

Analog Devices Inc.In Stock: 3198ADN4665ARUZ Datasheet

Current PartRFQ

DS90LV031ATMTC/NOPB

Texas InstrumentsIn Stock: 1637DS90LV031ATMTC/NOPB Datasheet

SimilarRFQ

DS90LV031ATMTCX/NOPB

Texas InstrumentsIn Stock: 17822DS90LV031ATMTCX/NOPB Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ADN4665ARUZ are qualified based on strict alignment of the following critical parameters:

• Protocol & Functionality: LVDS driver with 4 drivers and 0 receivers configuration
• Electrical Performance: 400 Mbps data rate capability, 3V to 3.6V supply voltage range, -40°C to 85°C operating temperature
• Mechanical Compatibility: 16-TSSOP package with 0.173" (4.40mm) width for direct PCB footprint compatibility
• Regulatory Compliance: ROHS3 compliance and MSL Level 1 rating
• Product Status: Active status ensuring ongoing availability and support

The identified substitute parts meet all these criteria, enabling functional equivalence in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Both Texas Instruments DS90LV031 variants (DS90LV031ATMTC/NOPB and DS90LV031ATMTCX/NOPB) are qualified substitutes for the ADN4665ARUZ. Selection between these options is determined by packaging and inventory requirements:

• DS90LV031ATMTC/NOPB: Supplied in Tube packaging with 1565 units in stock. Suitable for standard production runs and component kitting workflows.
• DS90LV031ATMTCX/NOPB: Supplied in Cut Tape (CT) & Digi-Reel® packaging with 17740 units in stock. Preferred for high-volume automated assembly processes and extended availability.

All three parts maintain Active product status, ensuring long-term supply continuity and manufacturer support. ROHS3 compliance and MSL Level 1 ratings are consistent across all options, meeting environmental and moisture handling requirements.

Frequently Asked Questions (FAQ)

Q: Can DS90LV031ATMTC/NOPB and DS90LV031ATMTCX/NOPB be used interchangeably with ADN4665ARUZ?

A: Yes. Both Texas Instruments parts are functionally equivalent substitutes. The difference between them is packaging format (Tube vs. Cut Tape & Digi-Reel®) and inventory availability, not electrical or mechanical specifications.

Q: Are there any PCB layout considerations when substituting these parts?

A: No. All three parts use identical 16-TSSOP packages with 0.173" (4.40mm) width, ensuring direct footprint compatibility without PCB redesign.

Q: Do the substitute parts support the same supply voltage and operating temperature range?

A: Yes. All parts operate within 3V to 3.6V supply voltage and -40°C to 85°C temperature range, maintaining identical electrical operating conditions.

Q: What is the significance of the packaging difference between DS90LV031ATMTC/NOPB and DS90LV031ATMTCX/NOPB?

A: Tube packaging is standard for manual assembly and smaller production volumes. Cut Tape & Digi-Reel® packaging is optimized for automated pick-and-place assembly and high-volume manufacturing. Electrical performance is identical.

Q: Are all parts ROHS3 compliant?

A: Yes. ADN4665ARUZ, DS90LV031ATMTC/NOPB, and DS90LV031ATMTCX/NOPB are all ROHS3 compliant with MSL Level 1 rating.

Q: What data rate capability do these LVDS drivers support?

A: All three parts support 400 Mbps data rate, meeting high-speed differential signaling requirements in interface applications.