ADIP10-G-LC Equivalent & Substitute Parts

Part Overview

The ADIP10-G-LC is a 10-position ribbon cable DIP header connector manufactured by Assmann WSW Components, designed for through-hole mounting with IDC (Insulation Displacement Contact) termination. This connector is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system support and component procurement.

The necessity to identify substitute parts stems from the product's obsolete status, which limits availability through standard distribution channels. Equivalent parts must maintain identical electrical and mechanical interface specifications to ensure direct compatibility in existing designs without circuit board modifications.

Substiute Parts

ADIP10-G-LC

Assmann WSW ComponentsIn Stock: 815ADIP10-G-LC Datasheet

Current PartRFQ

3040-10-00

CNC TechIn Stock: 66483040-10-00 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ADIP10-G-LC is determined by strict equivalence across the following critical parameters:

• Connector Type: Ribbon Cable, DIP Header configuration
• Position Count: 10 positions
• Cable Pitch: 0.050" (1.27mm)
• Board-Side Pitch: 0.100" (2.54mm)
• Row Configuration: 2 rows
• Mounting Method: Through Hole
• Termination Technology: IDC
• Contact Material: Gold finish

The CNC Tech 3040-10-00 meets all mandatory substitution criteria. Both connectors share identical electrical interface specifications, mechanical footprints, and termination methods, enabling direct functional replacement in applications currently using the ADIP10-G-LC.

Parameter Comparison

Engineering Selection Recommendations

The CNC Tech 3040-10-00 is the qualified substitute for the obsolete ADIP10-G-LC based on the following factors:

Product Status: The ADIP10-G-LC is obsolete, while the 3040-10-00 maintains active product status with confirmed inventory availability (6556 units in stock), ensuring reliable procurement for current and future applications.

Regulatory Compliance: The 3040-10-00 is ROHS3 compliant, meeting current environmental and regulatory requirements. Both parts maintain REACH Unaffected status and share identical ECCN (EAR99) and HTSUS (8536.69.4040) classifications.

Electrical and Mechanical Equivalence: All critical interface parameters are identical between the two connectors, including position count, pitch specifications, mounting method, and contact finish. This equivalence ensures direct compatibility without design modifications.

Packaging Consideration: The 3040-10-00 is supplied in Tray packaging, which may differ from the original part's packaging specification. Verify packaging requirements for your procurement and assembly processes.

Frequently Asked Questions (FAQ)

Q: Can the CNC Tech 3040-10-00 be used as a direct replacement for the ADIP10-G-LC without circuit board modifications?

A: Yes. Both connectors share identical board-side pitch (0.100" / 2.54mm), number of positions (10), row configuration (2 rows), and through-hole mounting specifications. The connectors are mechanically and electrically interchangeable at the board interface.

Q: What is the significance of the different row spacing values (0.300" vs. 0.100")?

A: Row spacing refers to the distance between the two rows of contacts on the connector body. The ADIP10-G-LC specifies 0.300" (7.62mm) row spacing, while the 3040-10-00 specifies 0.100" (2.54mm). This difference reflects the physical connector body design but does not affect board-level compatibility, as both maintain the same 0.100" board-side pitch for the pin grid pattern.

Q: Are there any compliance differences between the two parts?

A: The 3040-10-00 is ROHS3 compliant, while the ADIP10-G-LC compliance status is not specified. Both parts are REACH Unaffected and share identical ECCN and HTSUS classifications. If ROHS3 compliance is required for your application, the 3040-10-00 meets this requirement.

Q: What is the difference between cable pitch and board-side pitch?

A: Cable pitch (0.050" / 1.27mm) defines the spacing between contacts on the ribbon cable side of the connector. Board-side pitch (0.100" / 2.54mm) defines the spacing between pins at the circuit board interface. Both values are identical in the ADIP10-G-LC and 3040-10-00, ensuring compatibility.

Q: Does packaging type affect connector functionality?

A: No. Packaging type (Tray for the 3040-10-00) affects only storage, handling, and logistics. The connector's electrical and mechanical specifications remain unchanged. Verify that Tray packaging meets your assembly and procurement requirements.

Q: What does IDC termination mean?

A: IDC (Insulation Displacement Contact) termination allows ribbon cable conductors to be inserted directly into the connector without stripping insulation. The connector's contacts pierce the cable insulation, establishing electrical connection. Both the ADIP10-G-LC and 3040-10-00 use this termination method.