ADE07S Equivalent & Substitute Parts

Part Overview

The ADE07S is a DIP switch manufactured by TE Connectivity ALCOSWITCH Switches, configured as a 7-position surface mount SPST (Single Pole Single Throw) switch with slide actuator. The device is rated for 100mA at 24VDC and operates across a temperature range of -30°C to 85°C. This component is classified as obsolete, necessitating identification of equivalent alternatives for ongoing design requirements and production continuity. Substitute parts must maintain functional compatibility while meeting current manufacturing and compliance standards.

Substiute Parts

ADE07S

TE Connectivity ALCOSWITCH SwitchesIn Stock: 3430ADE07S Datasheet

Current PartRFQ

1-1825058-6

TE Connectivity ALCOSWITCH SwitchesIn Stock: 7991-1825058-6 Datasheet

DirectRFQ

219-7MST

CTS ElectrocomponentsIn Stock: 2097219-7MST Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ADE07S is determined by strict alignment with the following critical parameters: SPST circuit configuration, 7-position count, 100mA current rating, surface mount technology, slide standard actuator type, 0.100" pitch, gull wing termination, and washable construction. The voltage rating of 24VDC establishes the minimum acceptable operating voltage for direct substitution. Parts meeting these core electrical and mechanical specifications are classified as equivalent substitutes. Two substitute parts satisfy these criteria: the TE Connectivity 1-1825058-6 and the CTS Electrocomponents 219-7MST.

Parameter Comparison

Engineering Selection Recommendations

The ADE07S is obsolete and no longer in active production. Both substitute parts are classified as active products with current manufacturing support.

TE Connectivity 1-1825058-6: This substitute maintains manufacturer continuity within the TE Connectivity ALCOSWITCH Switches product line and shares the same base product series (ADE). The part achieves ROHS3 compliance, addressing regulatory requirements that the original ADE07S does not meet. Electrical and mechanical specifications align with the main part requirements. This substitute is recommended for applications where manufacturer consistency and regulatory compliance are prioritized.

CTS Electrocomponents 219-7MST: This substitute provides equivalent functionality with a 20VDC rating, which is lower than the original 24VDC specification. The part operates across an extended temperature range (-55°C to 85°C) compared to the original (-30°C to 85°C), providing enhanced thermal performance. ROHS3 compliance is achieved. The 219-7MST is suitable for applications where the 20VDC rating is acceptable and extended low-temperature operation is beneficial.

Both substitutes carry identical MSL ratings and ECCN classifications as the original part. Selection between the two substitutes depends on voltage rating requirements and manufacturer preference.

Frequently Asked Questions (FAQ)

Q: Can the 1-1825058-6 directly replace the ADE07S in all applications?

A: The 1-1825058-6 maintains the same circuit configuration (SPST), position count (7), current rating (100mA), mounting type (surface mount), pitch (0.100"), and washable construction as the ADE07S. Electrical and mechanical compatibility is established. The part is active and ROHS3 compliant, addressing the obsolescence of the original component.

Q: What is the voltage compatibility difference between the ADE07S and the 219-7MST?

A: The ADE07S is rated for 24VDC operation, while the 219-7MST is rated for 20VDC. The 219-7MST operates at a lower voltage specification. Applications requiring 24VDC operation must verify that 20VDC operation is acceptable for the circuit design before substitution.

Q: Are both substitute parts washable?

A: Yes. Both the 1-1825058-6 and 219-7MST are washable, matching the washable specification of the ADE07S.

Q: What is the packaging format for these substitute parts?

A: Both substitute parts are supplied in tube packaging. The ADE07S packaging format is not specified in the available data.

Q: Do the substitute parts meet RoHS compliance?

A: Yes. Both the 1-1825058-6 and 219-7MST are ROHS3 compliant. The original ADE07S is RoHS non-compliant, making the substitutes suitable for applications with RoHS compliance requirements.

Q: What is the mechanical life specification for the 219-7MST?

A: The mechanical life specification for the 219-7MST is not provided in the available data. The electrical life is specified as 2,000 cycles, which exceeds the 1,000 cycles specified for the ADE07S.

Q: Are there differences in operating temperature ranges between the substitutes?

A: The ADE07S operates from -30°C to 85°C. The 219-7MST operates from -55°C to 85°C, providing extended low-temperature capability. The 1-1825058-6 operating temperature range is not specified in the available data.

Q: Can both substitutes be used interchangeably in the same PCB design?

A: Both parts share the same mounting type (surface mount), pitch (0.100"), termination style (gull wing), and actuator configuration (raised slide standard). PCB footprints are compatible. However, voltage rating differences between the 219-7MST (20VDC) and the original specification (24VDC) must be evaluated for circuit compatibility.