ADE07 Equivalent & Substitute Parts

Part Overview

The ADE07 is a DIP slide switch manufactured by TE Connectivity ALCOSWITCH Switches, configured as a single-pole single-throw (SPST) switch with 7 positions. The switch is rated for 100mA at 24VDC and features a through-hole mounting design with a standard slide actuator. The ADE07 is classified as an obsolete product, necessitating identification of active equivalent parts to maintain design continuity and ensure ongoing component availability for production and repair applications.

Substiute Parts

ADE07

TE Connectivity ALCOSWITCH SwitchesIn Stock: 1194ADE07 Datasheet

Current PartRFQ

1825057-6

TE Connectivity ALCOSWITCH SwitchesIn Stock: 73281825057-6 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete ADE07 is based on electrical and mechanical parameter equivalence within the TE Connectivity ALCOSWITCH Switches product line. The substitute part must maintain identical specifications across the following critical parameters:

• Circuit configuration (SPST)
• Number of positions (7)
• Current rating (100mA)
• Voltage rating (24VDC)
• Actuator type (Slide Standard)
• Mounting type (Through Hole)
• Pitch spacing (0.100" / 2.54mm)
• Contact material and finish (Copper Alloy with Gold plating)
• Body material (Polyphenylene Sulfide)
• Operating temperature range (-30°C ~ 85°C)
• Mechanical and electrical life ratings (1,000 Cycles)

The substitute part 1825057-6 satisfies all these parameters and is classified as an active product with current manufacturing status and improved compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

The substitute part 1825057-6 is the direct equivalent for the obsolete ADE07. All electrical and mechanical parameters are identical, ensuring functional compatibility in existing circuit designs. The height above board differs by 0.004" (0.10mm), which is within acceptable tolerance for through-hole PCB applications and does not affect electrical performance or mechanical fit.

The 1825057-6 offers significant advantages over the ADE07:

• Product Status: The 1825057-6 is an active product with current manufacturing support, ensuring long-term availability and supply chain continuity.
• Regulatory Compliance: The 1825057-6 is ROHS3 compliant, meeting current environmental and regulatory requirements, whereas the ADE07 is non-compliant.
• Packaging: The 1825057-6 is supplied in tube packaging, providing improved component protection and handling compared to bulk packaging.

For new designs and production applications, the 1825057-6 is the appropriate selection. For legacy system repairs requiring exact form-factor matching, the ADE07 remains functionally equivalent where available inventory permits.

Frequently Asked Questions (FAQ)

Q: Can the 1825057-6 be used as a direct replacement for the ADE07 in existing designs?

A: Yes. The 1825057-6 is electrically and mechanically equivalent to the ADE07. All critical parameters including circuit configuration, current and voltage ratings, actuator type, mounting configuration, and pitch spacing are identical. The minor difference in height above board (0.004") does not affect PCB compatibility or electrical function.

Q: What is the significance of the RoHS compliance difference between these parts?

A: The ADE07 is RoHS non-compliant, while the 1825057-6 is ROHS3 compliant. For applications subject to RoHS regulations or customer requirements mandating RoHS compliance, the 1825057-6 is the required selection. The 1825057-6 meets current environmental standards for hazardous substance restrictions.

Q: Are there any differences in electrical performance between the ADE07 and 1825057-6?

A: No. Both parts are rated for identical electrical specifications: 100mA at 24VDC, SPST configuration with 7 positions, and 1,000 cycle mechanical and electrical life. Contact material, finish, and operating temperature range are identical.

Q: Why is the ADE07 classified as obsolete?

A: The ADE07 has been superseded by the 1825057-6 within the TE Connectivity product line. The 1825057-6 provides equivalent functionality with improved compliance certifications and active manufacturing status.

Q: Does packaging affect the electrical or mechanical performance of the switch?

A: No. The ADE07 is supplied in bulk packaging while the 1825057-6 is supplied in tube packaging. Packaging affects component protection, handling, and storage but does not alter electrical or mechanical performance. Both parts are functionally identical when installed on a PCB.

Q: What is the base product number for the 1825057-6?

A: The base product number is 1825057. The suffix "-6" indicates a specific configuration variant within the base product family.