ADCS7478AIMFE/NOPB Equivalent & Substitute Parts

Part Overview

The ADCS7478AIMFE/NOPB is an 8-bit Analog to Digital Converter manufactured by Texas Instruments, designed for single-ended input applications requiring 1 MHz sampling rate. This device operates across a supply voltage range of 2.7V to 5.25V for both analog and digital domains, making it suitable for low-power data acquisition systems. The part is currently active in production status and available in SOT-23-6 surface mount packaging with tape and reel distribution.

Equivalent and substitute parts become necessary when the primary part experiences supply constraints, extended lead times, or when design flexibility permits component sourcing from alternative manufacturers while maintaining functional compatibility.

Key Parameters

Parameter	Value
Resolution	8 Bit
Sampling Rate	1 MHz
Number of Inputs	1
Input Type	Single Ended
Data Interface	SPI, DSP
Architecture	SAR (Successive Approximation Register)
Reference Type	Supply
Voltage - Supply, Analog	2.7V ~ 5.25V
Voltage - Supply, Digital	2.7V ~ 5.25V
Operating Temperature	-40°C ~ 125°C
Package / Case	SOT-23-6
Mounting Type	Surface Mount
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution eligibility for the ADCS7478AIMFE/NOPB is determined by strict equivalence across the following critical parameters: 8-bit resolution, 1 MHz sampling rate, single-ended input configuration, SPI/DSP data interface, SAR architecture, supply-referenced operation, and SOT-23-6 package format. All identified substitutes maintain identical electrical specifications for analog and digital supply voltage ranges (2.7V ~ 5.25V), input type, and mounting technology.

The substitute parts are categorized as follows:

Parametric Equivalents maintain all functional and electrical parameters with variations only in packaging format (bulk versus tape and reel distribution).

Manufacturer Recommended Equivalents are sourced from Analog Devices Inc. and provide full functional compatibility with the primary specification set, with the exception of operating temperature range which extends to 85°C maximum rather than 125°C.

Parameter Comparison

Part Number	Manufacturer	Resolution (Bit)	Sampling Rate (MHz)	Inputs	Input Type	Data Interface	Architecture	Supply Voltage (V)	Operating Temp (°C)	Package	Packaging Format
ADCS7478AIMFE/NOPB	Texas Instruments	8	1	1	Single Ended	SPI, DSP	SAR	2.7 ~ 5.25	-40 ~ 125	SOT-23-6	Tape & Reel
ADCS7478AIMF/NOPB	National Semiconductor	8	1	1	Single Ended	SPI, DSP	SAR	2.7 ~ 5.25	-40 ~ 125	SOT-23-6	Bulk
ADCS7478AIMFX/NOPB	Texas Instruments	8	1	1	Single Ended	SPI, DSP	SAR	2.7 ~ 5.25	-40 ~ 125	SOT-23-6	Tape & Reel
AD7478ARTZ-500RL7	Analog Devices Inc.	8	1	1	Single Ended	SPI, DSP	SAR	2.7 ~ 5.25	-40 ~ 85	SOT-23-6	Cut Tape & Digi-Reel
AD7478ARTZ-REEL7	Analog Devices Inc.	8	1	1	Single Ended	SPI, DSP	SAR	2.7 ~ 5.25	-40 ~ 85	SOT-23-6	Cut Tape & Digi-Reel

Engineering Selection Recommendations

All listed substitute parts maintain active production status and ROHS3 compliance. The ADCS7478AIMF/NOPB and ADCS7478AIMFX/NOPB variants from Texas Instruments and National Semiconductor provide complete parameter equivalence with the primary part, differing only in packaging distribution format. These are suitable for direct substitution in applications where packaging format flexibility exists.

The Analog Devices AD7478ARTZ-500RL7 and AD7478ARTZ-REEL7 parts provide full functional compatibility with one specification variance: maximum operating temperature is limited to 85°C rather than 125°C. Selection of these parts requires confirmation that the application's thermal environment does not exceed 85°C during normal operation.

All substitute parts carry REACH Unaffected status and EAR99 export classification, matching the compliance profile of the primary part.

Frequently Asked Questions (FAQ)

Q: Can ADCS7478AIMF/NOPB replace ADCS7478AIMFE/NOPB in production designs?

A: Yes. Both parts are parametrically identical across all electrical and functional specifications. The difference is packaging format: ADCS7478AIMF/NOPB is supplied in bulk packaging while ADCS7478AIMFE/NOPB is supplied in tape and reel format. Substitution is valid if your assembly process can accommodate bulk packaging.

Q: What is the key difference between the Texas Instruments and Analog Devices variants?

A: The Analog Devices AD7478ARTZ series (both -500RL7 and -REEL7 variants) operate to a maximum temperature of 85°C, whereas the Texas Instruments ADCS7478 series operates to 125°C. All other electrical parameters, including resolution, sampling rate, supply voltage, and interface protocols, are identical. Use Analog Devices parts only if your application's maximum operating temperature does not exceed 85°C.

Q: Are the AD7478ARTZ-500RL7 and AD7478ARTZ-REEL7 parts interchangeable?

A: These parts are electrically and functionally identical. The difference is in packaging format: -500RL7 is supplied in cut tape and Digi-Reel format, while -REEL7 is also supplied in cut tape and Digi-Reel format. Both are suitable for automated assembly processes.

Q: Do all substitute parts use the same SOT-23-6 package?

A: Yes. All listed parts use SOT-23-6 surface mount packaging with identical pinout and footprint, enabling direct PCB substitution without layout modifications.

Q: What compliance certifications apply to all substitute parts?

A: All parts are ROHS3 compliant, REACH unaffected, and classified as EAR99 for export purposes, matching the compliance profile of the primary ADCS7478AIMFE/NOPB part.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message