ADCS7477AIMFX Equivalent & Substitute Parts

Part Overview

The ADCS7477AIMFX is a 10-bit Analog-to-Digital Converter (ADC) manufactured by Texas Instruments, featuring a single-ended input with SAR (Successive Approximation Register) architecture in SOT-23-6 surface mount packaging. This part is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and procurement continuity. The device operates across a supply voltage range of 2.7V to 5.25V for both analog and digital domains, with a 1 MHz sampling rate and SPI/DSP data interface.

Key Parameters

Parameter	Value
Resolution (Bits)	10
Sampling Rate	1 MHz
Number of Inputs	1
Input Type	Single Ended
Data Interface	SPI, DSP
Architecture	SAR
Voltage Supply Range (Analog)	2.7V ~ 5.25V
Voltage Supply Range (Digital)	2.7V ~ 5.25V
Package	SOT-23-6
Mounting Type	Surface Mount
Operating Temperature	-40°C ~ 125°C

Substitute Part Grouping Explanation

Substitution for the ADCS7477AIMFX is determined by strict equivalence across the following critical parameters: 10-bit resolution, 1 MHz sampling rate, single-ended input configuration, SPI/DSP interface, SAR architecture, SOT-23-6 package, and compatible supply voltage ranges (2.7V ~ 5.25V). All identified substitutes maintain these core electrical and mechanical specifications.

Substitute parts are grouped into three categories based on relationship type and product status:

Direct Manufacturer Equivalents (Texas Instruments): Parts with identical electrical specifications and packaging format variations, maintaining active product status and RoHS3 compliance.

Parametric Equivalents (Texas Instruments): Parts with identical electrical performance but different packaging configurations (Cut Tape vs. Tape & Reel), all maintaining active status and RoHS3 compliance.

Manufacturer Recommended Alternatives (Analog Devices Inc.): Cross-manufacturer equivalents with identical core specifications. Note: Operating temperature range differs (-40°C ~ 85°C vs. -40°C ~ 125°C on main part).

Parameter Comparison

Part Number	Manufacturer	Resolution	Sampling Rate	Inputs	Interface	Supply Voltage	Temp Range	Package	Product Status	RoHS Status
ADCS7477AIMFX	Texas Instruments	10-bit	1 MHz	1	SPI, DSP	2.7V ~ 5.25V	-40°C ~ 125°C	SOT-23-6	Obsolete	Non-compliant
ADCS7477AIMFX/NOPB	Texas Instruments	10-bit	1 MHz	1	SPI, DSP	2.7V ~ 5.25V	-40°C ~ 125°C	SOT-23-6	Active	RoHS3 Compliant
ADCS7477AIMF/NOPB	Texas Instruments	10-bit	1 MHz	1	SPI, DSP	2.7V ~ 5.25V	-40°C ~ 125°C	SOT-23-6	Active	RoHS3 Compliant
ADCS7477AIMFE/NOPB	Texas Instruments	10-bit	1 MHz	1	SPI, DSP	2.7V ~ 5.25V	-40°C ~ 125°C	SOT-23-6	Active	RoHS3 Compliant
AD7477ARTZ-500RL7	Analog Devices Inc.	10-bit	1 MHz	1	SPI, DSP	2.7V ~ 5.25V	-40°C ~ 85°C	SOT-23-6	Active	RoHS3 Compliant
AD7477ARTZ-REEL7	Analog Devices Inc.	10-bit	1 MHz	1	SPI, DSP	2.7V ~ 5.25V	-40°C ~ 85°C	SOT-23-6	Active	RoHS3 Compliant

Engineering Selection Recommendations

For new designs and procurement, ADCS7477AIMFX/NOPB is the primary recommended substitute. This part maintains identical electrical specifications to the obsolete ADCS7477AIMFX while offering active product status and RoHS3 compliance, eliminating regulatory and supply chain risk.

ADCS7477AIMF/NOPB and ADCS7477AIMFE/NOPB are functionally equivalent alternatives, differing only in packaging format (Cut Tape vs. Tape & Reel). Selection between these variants depends on procurement volume and assembly line requirements.

AD7477ARTZ-500RL7 and AD7477ARTZ-REEL7 (Analog Devices Inc.) are cross-manufacturer equivalents suitable for applications where the reduced operating temperature range (-40°C ~ 85°C) is acceptable. These parts maintain all core electrical specifications and offer active status with RoHS3 compliance. Verify PCB layout compatibility and firmware/driver support before implementation.

Frequently Asked Questions (FAQ)

Q: Can ADCS7477AIMFX/NOPB be used as a direct replacement for ADCS7477AIMFX?

A: Yes. Both parts share identical electrical specifications, resolution, sampling rate, input configuration, interface protocol, supply voltage range, and operating temperature range. The primary difference is product status (active vs. obsolete) and RoHS compliance. The /NOPB suffix indicates lead-free, halogen-free packaging.

Q: What is the difference between ADCS7477AIMF/NOPB and ADCS7477AIMFE/NOPB?

A: Both parts are parametrically equivalent with identical electrical performance. The difference lies in packaging format: ADCS7477AIMF/NOPB is supplied in Cut Tape (CT) & Digi-Reel format, while ADCS7477AIMFE/NOPB is supplied in Tape & Reel (TR) format. Selection depends on assembly volume and handling requirements.

Q: Are Analog Devices AD7477ARTZ parts fully compatible with the ADCS7477AIMFX?

A: AD7477ARTZ-500RL7 and AD7477ARTZ-REEL7 maintain identical electrical specifications for resolution, sampling rate, input type, interface, and supply voltage. The operating temperature range is narrower (-40°C ~ 85°C vs. -40°C ~ 125°C). Verify application temperature requirements before substitution. Both parts are RoHS3 compliant and actively produced.

Q: What does the SOT-23-6 package specification mean for substitution?

A: SOT-23-6 is a 6-pin surface mount package with fixed pinout and physical dimensions. All listed substitutes use this identical package, ensuring direct PCB compatibility without layout modifications. Verify pin assignment in device datasheets to confirm functional equivalence.

Q: Why is the main part ADCS7477AIMFX marked as obsolete?

A: Obsolescence indicates the part is no longer in active production. ADCS7477AIMFX/NOPB is the active successor, offering the same functionality with modern compliance certifications (RoHS3) and guaranteed supply availability.

Q: Can I mix different substitute parts in the same design?

A: Yes, provided all parts meet your application's electrical and thermal requirements. All listed substitutes are electrically equivalent. Ensure consistent sourcing practices and verify component datasheets for any minor parametric variations not listed in this reference.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message