Request Quote
(Ships tomorrow)
ADA4896-2ARMZ-RL Equivalent & Substitute Parts
Part Overview
The ADA4896-2ARMZ-RL is a voltage feedback amplifier manufactured by Analog Devices Inc., configured as a dual-channel (2 circuit) integrated circuit in an 8-MSOP surface mount package. This device features rail-to-rail output capability and operates across a 3V to 10V supply range with an operating temperature span of -40°C to 125°C. The part is currently in active production status with 928 units in stock.
Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be achieved within the specified parameter ranges. Alternative packaging formats, temperature ratings, or supply configurations may necessitate component substitution in applications requiring different operational constraints or inventory availability.
Substiute Parts
Key Parameters
| Parameter | Value | Unit |
|---|---|---|
| Amplifier Type | Voltage Feedback | — |
| Number of Circuits | 2 | — |
| Output Type | Rail-to-Rail | — |
| Slew Rate | 120 | V/µs |
| Gain Bandwidth Product | 90 | MHz |
| -3dB Bandwidth | 230 | MHz |
| Current - Input Bias | 4 | µA |
| Voltage - Input Offset | 28 | µV |
| Current - Supply (per channel) | 3 | mA |
| Current - Output / Channel | 80 | mA |
| Voltage - Supply Span (Min) | 3 | V |
| Voltage - Supply Span (Max) | 10 | V |
| Operating Temperature | -40 to 125 | °C |
| Package / Case | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | — |
| Mounting Type | Surface Mount | — |
| RoHS Status | ROHS3 Compliant | — |
| Moisture Sensitivity Level | 1 (Unlimited) | — |
Substitute Part Grouping Explanation
Substitute parts are classified into two categories based on substitution criteria:
Parametric Equivalents share identical electrical specifications and amplifier topology. These parts differ only in packaging format or temperature rating designation. The ADA4896-2ARMZ-R7 is a parametric equivalent available in Cut Tape & Digi-Reel packaging instead of Tape & Reel format.
Similar Substitutes maintain functional compatibility through equivalent or superior performance in critical parameters while differing in amplifier type, slew rate, bandwidth, or supply current characteristics. Substitution suitability depends on application-specific requirements for:
- Amplifier Type (Voltage Feedback vs. General Purpose vs. CMOS)
- Slew Rate and Gain Bandwidth Product
- Input Bias Current and Input Offset Voltage
- Supply Current per Channel
- Output Current Capability
- Operating Temperature Range
- Package compatibility (8-MSOP form factor maintained across all substitutes)
Parameter Comparison
| Part Number | Manufacturer | Amplifier Type | Slew Rate (V/µs) | GBW (MHz) | Input Bias (µA) | Input Offset (µV) | Supply Current (mA) | Output Current (mA) | Temp Range (°C) | Packaging |
|---|---|---|---|---|---|---|---|---|---|---|
| ADA4896-2ARMZ-RL | Analog Devices | Voltage Feedback | 120 | 90 | 4 | 28 | 3 | 80 | -40 to 125 | Tape & Reel |
| ADA4896-2ARMZ-R7 | Analog Devices | Voltage Feedback | 120 | 90 | 4 | 28 | 3 | 80 | -40 to 125 | Cut Tape & Digi-Reel |
| LT6203CMS8#PBF | Analog Devices | General Purpose | 25 | 100 | 3.8 | 2600 | 2.8 | 40 | 0 to 70 | Tube |
| LT6203HMS8#PBF | Analog Devices | General Purpose | 25 | 100 | 3.8 | 2600 | 2.8 | 40 | -40 to 125 | Tube |
| LT6203IMS8#PBF | Analog Devices | General Purpose | 25 | 100 | 3.8 | 2600 | 2.8 | 40 | -40 to 85 | Tube |
| LT6203IMS8#TRPBF | Analog Devices | General Purpose | 25 | 100 | 3.8 | 2600 | 2.8 | 40 | -40 to 85 | Cut Tape & Digi-Reel |
| LMH6646MM/NOPB | Texas Instruments | Voltage Feedback | 22 | — | 0.65 | 1000 | 0.725 | 20 | -40 to 85 | Tape & Reel |
| LMP7708MME/NOPB | Texas Instruments | General Purpose | 5.9 | 15 | 0.0002 | 37 | 1.5 | 86 | -40 to 125 | Tape & Reel |
| MAX4392EUA+ | Analog Devices/Maxim | Voltage Feedback | 500 | — | — | — | 6 | 95 | — | Tube |
| OPA2703EA/250 | Texas Instruments | CMOS | 0.6 | 1 | 0.001 | 160 | 0.16 | 10 | -40 to 85 | Cut Tape & Digi-Reel |
| OPA2703EA/2K5 | Texas Instruments | CMOS | 0.6 | 1 | 0.001 | 160 | 0.16 | 10 | -40 to 85 | Tape & Reel |
Engineering Selection Recommendations
Direct Parametric Replacement:
The ADA4896-2ARMZ-R7 provides identical electrical performance to the ADA4896-2ARMZ-RL. Selection between these two variants depends solely on packaging and supply chain requirements. Both parts maintain ROHS3 compliance, MSL Level 1 rating, and identical operating specifications across the full -40°C to 125°C temperature range.
Voltage Feedback Amplifier Substitutes:
The LMH6646MM/NOPB (Texas Instruments) maintains voltage feedback topology with rail-to-rail output and dual-channel configuration. This part operates within a -40°C to 85°C temperature range and features reduced slew rate (22V/µs) and lower supply current (0.725mA per channel). The LMH6646MM/NOPB is suitable for applications where the primary ADA4896-2ARMZ-RL is unavailable and lower power consumption is acceptable.
The MAX4392EUA+ (Analog Devices/Maxim Integrated) is a voltage feedback video amplifier with significantly elevated slew rate (500V/µs) and higher output current capability (95mA per channel). This part is appropriate for high-speed signal processing applications requiring superior transient response.
General Purpose Amplifier Substitutes:
The LT6203 series (LT6203CMS8#PBF, LT6203HMS8#PBF, LT6203IMS8#PBF, LT6203IMS8#TRPBF) provides general purpose amplification with rail-to-rail output and dual-channel configuration. These parts feature lower slew rate (25V/µs) and reduced supply current (2.8mA per channel) compared to the ADA4896-2ARMZ-RL. Temperature rating variants range from 0°C to 70°C (commercial) through -40°C to 125°C (industrial). The LT6203HMS8#PBF variant matches the full industrial temperature range of the primary part.
The LMP7708MME/NOPB (Texas Instruments) is a general purpose amplifier with extremely low input bias current (0.2pA) and operates across -40°C to 125°C. This part features significantly lower bandwidth (15MHz) and slew rate (5.9V/µs), making it suitable for precision low-frequency applications.
CMOS Amplifier Substitutes:
The OPA2703EA/250 and OPA2703EA/2K5 are CMOS amplifiers with ultra-low input bias current (1pA) and minimal supply current (160µA per channel). These parts operate within -40°C to 85°C and feature 1MHz bandwidth. CMOS topology is appropriate for battery-powered or ultra-low-power applications where the reduced bandwidth and slew rate are acceptable.
All substitute parts maintain 8-MSOP surface mount package compatibility, ROHS3 compliance, and MSL Level 1 or Level 2 moisture sensitivity ratings.
Frequently Asked Questions (FAQ)
Q: Can the ADA4896-2ARMZ-R7 be used as a direct replacement for the ADA4896-2ARMZ-RL?
A: Yes. The ADA4896-2ARMZ-R7 is a parametric equivalent with identical electrical specifications, operating temperature range (-40°C to 125°C), and supply voltage range (3V to 10V). The only difference is packaging format: the -R7 variant uses Cut Tape & Digi-Reel packaging instead of Tape & Reel. Both parts are pin-compatible in 8-MSOP configuration.
Q: What are the key differences between voltage feedback and general purpose amplifier types?
A: Voltage feedback amplifiers (ADA4896-2ARMZ-RL, LMH6646MM/NOPB, MAX4392EUA+) are optimized for high-speed, high-bandwidth applications with superior slew rate and transient response. General purpose amplifiers (LT6203 series, LMP7708MME/NOPB) prioritize lower power consumption and are suitable for moderate-bandwidth applications. The choice depends on application bandwidth and speed requirements.
Q: Can I substitute the ADA4896-2ARMZ-RL with an OPA2703 CMOS amplifier?
A: Substitution is possible only in applications where the significantly reduced bandwidth (1MHz vs. 90MHz), lower slew rate (0.6V/µs vs. 120V/µs), and minimal output current (10mA vs. 80mA) are acceptable. CMOS topology is appropriate for ultra-low-power, low-frequency precision applications. High-speed signal processing applications require voltage feedback or general purpose amplifiers.
Q: What is the significance of the temperature rating variants in the LT6203 series?
A: The LT6203 series offers three temperature grades: commercial (0°C to 70°C), industrial (-40°C to 85°C), and extended industrial (-40°C to 125°C). The LT6203HMS8#PBF matches the full -40°C to 125°C range of the ADA4896-2ARMZ-RL. Selection depends on the application's operating environment. Commercial-grade parts (LT6203CMS8#PBF) are suitable only for controlled indoor environments.
Q: Are all substitute parts available in the same 8-MSOP package?
A: All listed substitute parts are available in 8-MSOP surface mount package configuration, ensuring mechanical and electrical pin compatibility. However, packaging formats differ: some are supplied in Tape & Reel, others in Tube, and some in Cut Tape & Digi-Reel. Verify packaging compatibility with your assembly process requirements.
Q: What does MSL Level 1 mean for moisture sensitivity?
A: MSL (Moisture Sensitivity Level) 1 indicates unlimited shelf life without moisture control. The ADA4896-2ARMZ-RL and most substitute parts carry MSL Level 1 rating, meaning they do not require special moisture-controlled storage or baking procedures prior to reflow soldering. OPA2703 variants carry MSL Level 2 (1 Year), requiring moisture control during storage.
Q: How do input offset voltage specifications affect circuit performance?
A: Input offset voltage (28µV for ADA4896-2ARMZ-RL) represents the DC voltage difference between the two input terminals when the output is at zero. Lower offset voltage (2.6mV for LT6203, 37µV for LMP7708, 160µV for OPA2703) reduces DC errors in precision applications. High-speed applications are less sensitive to offset voltage variations.
Q: Can the MAX4392EUA+ be used in all applications where the ADA4896-2ARMZ-RL is specified?
A: The MAX4392EUA+ is suitable only for applications requiring the elevated slew rate (500V/µs) and output current (95mA) capabilities. Applications with moderate bandwidth requirements may experience stability issues or excessive power consumption. Verify circuit design compatibility before substitution.
Q: What is the difference between Tape & Reel and Cut Tape & Digi-Reel packaging?
A: Tape & Reel packaging supplies components on continuous carrier tape wound on a reel, suitable for high-volume automated assembly. Cut Tape & Digi-Reel supplies components on cut tape segments or Digi-Reel format, appropriate for lower-volume production or prototyping. Both formats are compatible with standard pick-and-place equipment; selection depends on production volume and assembly line configuration.
Q: Are all substitute parts RoHS3 compliant?
A: Yes. All listed substitute parts carry ROHS3 compliance certification, meeting the Restriction of Hazardous Substances Directive requirements. All parts are also REACH Unaffected and carry EAR99 export classification.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts