AD8610ARM-REEL Equivalent & Substitute Parts

Part Overview

The AD8610ARM-REEL is a J-FET operational amplifier manufactured by Analog Devices Inc., designed for single-circuit applications in 8-MSOP surface mount packaging. This device is classified as obsolete, necessitating identification of active equivalent parts for continued system support and new design implementations. The AD8610ARM-REEL delivers high input impedance and low input bias current characteristics suitable for precision signal conditioning applications.

Substiute Parts

AD8610ARM-REEL

Analog Devices Inc.In Stock: 2330AD8610ARM-REEL Datasheet

Current PartRFQ

AD8610ARMZ-REEL

Analog Devices Inc.In Stock: 2013AD8610ARMZ-REEL Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the AD8610ARM-REEL is determined by electrical and mechanical parameter equivalence across the following criteria:

Electrical Parameters:

• Amplifier topology (J-FET input stage)
• Single-circuit configuration
• Slew rate (60 V/µs)
• Gain bandwidth product (25 MHz)
• Input bias current (3 pA)
• Input offset voltage (85 µV)
• Supply current (3 mA)
• Output current capability (45 mA per channel)
• Supply voltage range (10 V to 26 V)
• Operating temperature range (-40°C to 125°C)

Mechanical Parameters:

• Surface mount technology
• 8-MSOP package footprint (0.118", 3.00mm width)
• Moisture sensitivity level 1 (unlimited)

The AD8610ARMZ-REEL maintains identical electrical specifications and mechanical compatibility with the AD8610ARM-REEL, differing only in product status and packaging format.

Parameter Comparison

Engineering Selection Recommendations

The AD8610ARMZ-REEL is the direct functional equivalent of the AD8610ARM-REEL. Both parts share identical electrical performance specifications and mechanical compatibility. The primary distinction is product lifecycle status: the AD8610ARM-REEL is obsolete, while the AD8610ARMZ-REEL maintains active production status.

For applications currently using the AD8610ARM-REEL, transition to the AD8610ARMZ-REEL is supported by:

• Complete electrical parameter equivalence across all specified ranges
• Identical 8-MSOP surface mount package footprint
• Matching supply voltage requirements (10 V to 26 V)
• Identical operating temperature range (-40°C to 125°C)
• RoHS3 compliance certification on the substitute part
• REACH unaffected status on the substitute part
• Moisture sensitivity level 1 (unlimited) on both parts

No circuit redesign or board layout modification is required for substitution. The parts are pin-compatible and functionally interchangeable within the specified electrical and thermal operating conditions.

Frequently Asked Questions (FAQ)

Q: Can the AD8610ARMZ-REEL directly replace the AD8610ARM-REEL in existing designs?

A: Yes. The AD8610ARMZ-REEL is electrically and mechanically equivalent to the AD8610ARM-REEL. All electrical parameters, package footprint, and operating ranges are identical. No circuit modifications are required.

Q: What is the primary reason for substitution?

A: The AD8610ARM-REEL is classified as obsolete. The AD8610ARMZ-REEL is the active equivalent part from Analog Devices Inc., ensuring continued availability and supply chain support.

Q: Are the package dimensions identical?

A: Yes. Both parts use the 8-MSOP package with dimensions of 0.118" × 3.00mm width. PCB footprints are identical.

Q: Do the supply voltage requirements differ?

A: No. Both parts operate across the same supply voltage range of 10 V to 26 V.

Q: What is the operating temperature range for both parts?

A: Both the AD8610ARM-REEL and AD8610ARMZ-REEL operate from -40°C to 125°C.

Q: Are there compliance differences between the two parts?

A: The AD8610ARMZ-REEL carries RoHS3 compliance and REACH unaffected status certifications. Both parts have moisture sensitivity level 1 (unlimited).

Q: What is the input bias current specification?

A: Both parts specify 3 pA input bias current, characteristic of J-FET input amplifiers.

Q: Can these parts be used in high-impedance signal conditioning applications?

A: Yes. The 3 pA input bias current and 85 µV input offset voltage are suitable for precision high-impedance applications.

Q: What is the slew rate of these amplifiers?

A: Both parts deliver 60 V/µs slew rate with a 25 MHz gain bandwidth product.

Q: Is the packaging format the same for both parts?

A: Yes. Both parts are supplied in Tape & Reel (TR) format for automated assembly.