AD8542ARM-REEL Equivalent & Substitute Parts

Part Overview

The AD8542ARM-REEL is a general-purpose operational amplifier manufactured by Analog Devices Inc., featuring dual circuits in a rail-to-rail configuration housed in an 8-MSOP package. This device is classified as obsolete, indicating discontinuation from active production. The AD8542ARM-REEL operates across a supply voltage range of 2.7 V to 5.5 V with an operating temperature range of -40°C to 125°C, making it suitable for low-power analog signal processing applications.

Due to its obsolete status, locating equivalent parts with active production status and compatible electrical and mechanical specifications is necessary for ongoing design support and procurement continuity. Direct equivalents and similar alternatives are available from Analog Devices Inc. with active product status and enhanced compliance certifications.

Key Parameters

Parameter	Value	Unit
Amplifier Type	General Purpose	—
Number of Circuits	2	—
Output Type	Rail-to-Rail	—
Slew Rate	0.92	V/µs
Gain Bandwidth Product	1	MHz
Current - Input Bias	4	pA
Voltage - Input Offset	1	mV
Current - Supply (x2 Channels)	45	µA
Current - Output / Channel	30	mA
Voltage - Supply Span (Min)	2.7	V
Voltage - Supply Span (Max)	5.5	V
Operating Temperature	-40 to 125	°C
Mounting Type	Surface Mount	—
Package / Case	8-TSSOP, 8-MSOP (0.118", 3.00mm Width)	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution of the AD8542ARM-REEL is determined by strict alignment of electrical and mechanical parameters. The critical substitution criteria are:

Electrical Compatibility Requirements:

Dual-circuit configuration (2 circuits minimum)
Rail-to-rail output capability
Supply voltage range encompassing 2.7 V to 5.5 V minimum
Operating temperature range supporting -40°C to 125°C minimum
8-MSOP package footprint compatibility

Direct Equivalent Category: The AD8542ARMZ-REEL represents a direct equivalent, maintaining identical electrical specifications while offering active product status and enhanced compliance certifications (ROHS3 Compliant, REACH Unaffected).

Similar Alternative Category: The LTC6078 series (LTC6078ACMS8#PBF, LTC6078AIMS8#PBF, LTC6078AIMS8#TRPBF, LTC6078CMS8#PBF, LTC6078CMS8#TRPBF, LTC6078HMS8#TRPBF, LTC6078IMS8#PBF, LTC6078IMS8#TRPBF) and LTC6081CMS8#PBF represent similar alternatives with CMOS architecture. These parts maintain the same package footprint and supply voltage range but exhibit different performance characteristics in slew rate, gain bandwidth product, input bias current, and input offset voltage. The LTC6078HMS8#TRPBF variant specifically matches the full operating temperature range of -40°C to 125°C.

Parameter Comparison

Part Number	Manufacturer	Product Status	Amplifier Type	Number of Circuits	Output Type	Slew Rate (V/µs)	Gain Bandwidth Product (MHz)	Current - Input Bias (pA)	Voltage - Input Offset (mV/µV)	Current - Supply (µA)	Current - Output / Channel (mA)	Voltage - Supply Span Min (V)	Voltage - Supply Span Max (V)	Operating Temperature (°C)	Package
AD8542ARM-REEL	Analog Devices Inc.	Obsolete	General Purpose	2	Rail-to-Rail	0.92	1	4	1 mV	45	30	2.7	5.5	-40 to 125	8-MSOP
AD8542ARMZ-REEL	Analog Devices Inc.	Active	General Purpose	2	Rail-to-Rail	0.92	1	4	1 mV	45	30	2.7	5.5	-40 to 125	8-MSOP
LTC6078ACMS8#PBF	Analog Devices Inc.	Active	CMOS	2	Rail-to-Rail	0.05	0.75	0.2	20 µV	55	25	2.7	5.5	-40 to 85	8-MSOP
LTC6078AIMS8#PBF	Analog Devices Inc.	Active	CMOS	2	Rail-to-Rail	0.05	0.75	0.2	20 µV	55	25	2.7	5.5	-40 to 85	8-MSOP
LTC6078AIMS8#TRPBF	Analog Devices Inc.	Active	CMOS	2	Rail-to-Rail	0.05	0.75	0.2	20 µV	55	25	2.7	5.5	-40 to 85	8-MSOP
LTC6078CMS8#PBF	Analog Devices Inc.	Active	CMOS	2	Rail-to-Rail	0.05	0.75	0.2	25 µV	55	25	2.7	5.5	0 to 70	8-MSOP
LTC6078CMS8#TRPBF	Analog Devices Inc.	Active	CMOS	2	Rail-to-Rail	0.05	0.75	0.2	25 µV	55	25	2.7	5.5	0 to 70	8-MSOP
LTC6078HMS8#TRPBF	Analog Devices Inc.	Active	CMOS	2	Rail-to-Rail	0.05	0.75	0.2	10 µV	55	25	2.7	5.5	-40 to 125	8-MSOP
LTC6078IMS8#PBF	Analog Devices Inc.	Active	CMOS	2	Rail-to-Rail	0.05	0.75	0.2	25 µV	55	25	2.7	5.5	-40 to 85	8-MSOP
LTC6078IMS8#TRPBF	Analog Devices Inc.	Active	CMOS	2	Rail-to-Rail	0.05	0.75	0.2	25 µV	55	25	2.7	5.5	-40 to 85	8-MSOP
LTC6081CMS8#PBF	Analog Devices Inc.	Active	CMOS	2	Rail-to-Rail	1	3.5	0.2	90 µV	330	24	2.7	5.5	0 to 70	8-MSOP

Engineering Selection Recommendations

Direct Equivalent Selection: The AD8542ARMZ-REEL is the recommended direct replacement for the obsolete AD8542ARM-REEL. This part maintains identical electrical specifications across all measured parameters while offering active product status. The AD8542ARMZ-REEL carries ROHS3 compliance and REACH unaffected status, providing enhanced regulatory alignment for new designs and procurement continuity.

Similar Alternative Selection: The LTC6078 series and LTC6081CMS8#PBF represent viable alternatives when direct equivalents are unavailable. Selection within this category depends on specific application requirements:

LTC6078HMS8#TRPBF is the optimal LTC6078 variant for applications requiring the full -40°C to 125°C operating temperature range matching the original AD8542ARM-REEL specification. This part offers the lowest input offset voltage (10 µV) within the LTC6078 family and maintains active product status with full compliance certifications.
LTC6078AIMS8#TRPBF and LTC6078IMS8#TRPBF support the -40°C to 85°C temperature range and are suitable for applications not requiring extended high-temperature operation beyond 85°C.
LTC6078CMS8#PBF and LTC6078CMS8#TRPBF are restricted to 0°C to 70°C operation and are not suitable for applications requiring -40°C low-temperature performance.
LTC6081CMS8#PBF offers enhanced slew rate (1 V/µs) and gain bandwidth product (3.5 MHz) compared to the AD8542ARM-REEL but operates within 0°C to 70°C range and exhibits significantly higher supply current (330 µA). This part is suitable only for applications where extended bandwidth and slew rate are required and temperature range is limited to 0°C to 70°C.

All recommended alternatives carry ROHS3 compliance and REACH unaffected status, ensuring regulatory compliance for modern manufacturing and distribution environments.

Frequently Asked Questions (FAQ)

Q: Can the AD8542ARMZ-REEL be used as a direct replacement for the AD8542ARM-REEL?

A: Yes. The AD8542ARMZ-REEL is a direct equivalent with identical electrical specifications. Both parts feature 0.92 V/µs slew rate, 1 MHz gain bandwidth product, 4 pA input bias current, 1 mV input offset voltage, and -40°C to 125°C operating temperature range. The primary difference is product status: AD8542ARMZ-REEL is active with current production, while AD8542ARM-REEL is obsolete. Both use the 8-MSOP package.

Q: What are the key differences between the AD8542ARM-REEL and LTC6078 series alternatives?

A: The AD8542ARM-REEL uses general-purpose amplifier architecture, while LTC6078 series parts use CMOS architecture. This results in lower input bias current (0.2 pA vs. 4 pA) and lower input offset voltage (10–25 µV vs. 1 mV) for LTC6078 parts. However, LTC6078 parts exhibit lower slew rate (0.05 V/µs vs. 0.92 V/µs) and lower gain bandwidth product (0.75 MHz vs. 1 MHz). All parts maintain the same 8-MSOP package footprint and 2.7 V to 5.5 V supply voltage range.

Q: Which LTC6078 variant should I select if my application requires -40°C to 125°C operation?

A: The LTC6078HMS8#TRPBF is the only LTC6078 variant supporting the full -40°C to 125°C operating temperature range. This part also offers the lowest input offset voltage (10 µV) within the LTC6078 family and is supplied in Tape & Reel packaging.

Q: Are all substitute parts available in the same packaging options as the AD8542ARM-REEL?

A: The AD8542ARMZ-REEL is available in Cut Tape and Digi-Reel packaging. LTC6078 series parts are available in Tube or Tape & Reel packaging options depending on the specific part number suffix. LTC6081CMS8#PBF is available in Tube packaging. Verify packaging availability with your supplier based on your procurement requirements.

Q: What is the impact of switching from AD8542ARM-REEL to an LTC6078 alternative on circuit performance?

A: The primary performance differences are slew rate and bandwidth. The AD8542ARM-REEL provides 0.92 V/µs slew rate and 1 MHz bandwidth, while LTC6078 parts provide 0.05 V/µs slew rate and 0.75 MHz bandwidth. Applications requiring fast signal transitions or higher frequency response may not be suitable for LTC6078 substitution. Conversely, LTC6078 parts offer superior input offset voltage and input bias current characteristics, beneficial for precision analog applications.

Q: Do all substitute parts carry the same compliance certifications?

A: The AD8542ARMZ-REEL, all LTC6078 variants, and LTC6081CMS8#PBF carry ROHS3 compliance and REACH unaffected status. The obsolete AD8542ARM-REEL does not list these certifications. All parts maintain MSL 1 (Unlimited) moisture sensitivity level.

Q: Can the LTC6081CMS8#PBF be used as a substitute for the AD8542ARM-REEL?

A: The LTC6081CMS8#PBF is not recommended as a direct substitute due to significant differences in operating temperature range (0°C to 70°C vs. -40°C to 125°C) and supply current (330 µA vs. 45 µA). However, it is suitable for applications where extended slew rate (1 V/µs) and gain bandwidth product (3.5 MHz) are required and temperature operation is limited to 0°C to 70°C.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message