AD8532ARMZ-R2 Equivalent & Substitute Parts

Part Overview

The AD8532ARMZ-R2 is a general-purpose operational amplifier manufactured by Analog Devices Inc., featuring dual circuits in a rail-to-rail configuration. This device is designed for applications requiring low-power, dual-channel amplification with moderate bandwidth and slew rate characteristics. The part is currently discontinued at DiGi Electronics, necessitating identification of functionally equivalent alternatives that maintain compatibility with existing circuit designs while meeting the same electrical and mechanical specifications.

Key Parameters

Parameter	Value
Manufacturer Part Number	AD8532ARMZ-R2
Manufacturer	Analog Devices Inc.
Category	Linear, Amplifiers
Amplifier Type	General Purpose
Number of Circuits	2
Output Type	Rail-to-Rail
Package / Case	8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
Mounting Type	Surface Mount
Slew Rate	5 V/µs
Gain Bandwidth Product	3 MHz
Current - Input Bias	5 pA
Voltage - Input Offset	25 mV
Current - Supply	750 µA (x2 Channels)
Current - Output / Channel	250 mA
Voltage - Supply Span (Min)	2.7 V
Voltage - Supply Span (Max)	6 V
Operating Temperature	-40°C ~ 85°C
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Product Status	Discontinued at DiGi Electronics

Substitute Part Grouping Explanation

Substitution of the AD8532ARMZ-R2 is determined by the following critical parameters:

Functional Equivalence Criteria:

Dual-circuit configuration (2 circuits per package)
Rail-to-rail output capability
General-purpose amplifier classification
Surface-mount packaging in 8-pin MSOP or compatible footprint
Operating temperature range compatibility (-40°C minimum)
Supply voltage range overlap (minimum 2.7 V to 6 V span)

Direct Substitutes (Identical Electrical Performance): The AD8532ARMZ-REEL is a direct substitute, offering identical electrical specifications with the same base product number (AD8532) and differing only in packaging format (Digi-Reel vs. standard tape).

Functional Alternatives (Compatible Electrical Performance): Parts from Microchip Technology, Texas Instruments, and STMicroelectronics are grouped as functional alternatives. These devices maintain the dual-circuit, rail-to-rail, surface-mount configuration while exhibiting variations in slew rate, gain bandwidth product, input bias current, and supply current characteristics. Selection among these alternatives depends on specific application requirements for speed, precision, and power consumption.

Parameter Comparison

Parameter	AD8532ARMZ-R2	AD8532ARMZ-REEL	MCP6L72T-E/MS	OPA2340EA/2K5	OPA2343EA/2K5	TS1852IST	TS1872AIST	TSU102IST
Manufacturer	Analog Devices	Analog Devices	Microchip	Texas Instruments	Texas Instruments	STMicroelectronics	STMicroelectronics	STMicroelectronics
Number of Circuits	2	2	2	2	2	2	2	2
Output Type	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail
Slew Rate (V/µs)	5	5	0.9	6	6	0.25	0.6	0.003
Gain Bandwidth Product (MHz)	3	3	2	5.5	5.5	0.63	1.8	0.009
Current - Input Bias (pA)	5	5	1	0.2	0.2	16000	70000	1
Voltage - Input Offset (mV)	25	25	1	0.15	2	1	1	0.1
Current - Supply (µA)	750	750	150	750	850	162	500	0.65
Current - Output / Channel (mA)	250	250	25	50	50	48	80	11
Voltage - Supply Span (Min - Max)	2.7 - 6 V	2.7 - 6 V	2 - 6 V	2.5 - 5.5 V	2.5 - 5.5 V	1.8 - 6 V	1.8 - 6 V	1.5 - 5.5 V
Operating Temperature (°C)	-40 ~ 85	-40 ~ 85	-40 ~ 125	-40 ~ 125	-40 ~ 85	-40 ~ 125	-40 ~ 125	-40 ~ 85
Package / Case	8-MSOP	8-MSOP	8-MSOP	8-VSSOP	8-VSSOP	8-MiniSO	8-MiniSO	8-MiniSO
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
RoHS Status	Not specified	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Discontinued	Active	Active	Active	Active	Active	Active	Active

Engineering Selection Recommendations

Direct Replacement: The AD8532ARMZ-REEL is the recommended direct replacement for the AD8532ARMZ-R2. This part maintains identical electrical specifications and base product number, with the only difference being packaging format (Digi-Reel vs. standard tape). The AD8532ARMZ-REEL is currently active in production and ROHS3 compliant, ensuring long-term availability and regulatory compliance.

Functional Alternatives for Speed-Critical Applications: For applications requiring higher slew rate and gain bandwidth product, the OPA2340EA/2K5 and OPA2343EA/2K5 from Texas Instruments provide 6 V/µs slew rate and 5.5 MHz bandwidth. Both parts are ROHS3 compliant and active. The OPA2340EA/2K5 offers extended operating temperature range (-40°C to 125°C) and higher inventory availability (30,200 units). The OPA2343EA/2K5 maintains the same temperature range as the original part (-40°C to 85°C).

Functional Alternatives for Low-Power Applications: The MCP6L72T-E/MS from Microchip Technology provides significantly reduced supply current (150 µA vs. 750 µA) while maintaining dual-circuit, rail-to-rail configuration. This part is ROHS3 compliant and active, with extended operating temperature range (-40°C to 125°C). Trade-offs include lower slew rate (0.9 V/µs) and reduced output current capability (25 mA per channel).

Functional Alternatives for Ultra-Low-Power Applications: The TSU102IST from STMicroelectronics is suitable for applications prioritizing minimal power consumption, with supply current of only 650 nA. This part is ROHS3 compliant and active. Significant trade-offs include extremely low bandwidth (9 kHz), minimal slew rate (0.003 V/µs), and reduced output current (11 mA per channel).

Functional Alternatives for Moderate Performance: The TS1852IST and TS1872AIST from STMicroelectronics provide intermediate performance characteristics. The TS1852IST offers 0.25 V/µs slew rate and 630 kHz bandwidth with minimal supply current (162 µA). The TS1872AIST provides 0.6 V/µs slew rate and 1.8 MHz bandwidth with 500 µA supply current. Both are ROHS3 compliant and active with extended operating temperature range (-40°C to 125°C).

Frequently Asked Questions (FAQ)

Q: Can the AD8532ARMZ-REEL be used as a direct replacement for the AD8532ARMZ-R2?

A: Yes. The AD8532ARMZ-REEL is a direct electrical equivalent with identical specifications. The difference is packaging format: the REEL version uses Digi-Reel packaging while the R2 uses standard tape. Both are 8-MSOP surface-mount packages with identical pinout and electrical performance.

Q: What are the key differences between the AD8532ARMZ-R2 and the OPA2340EA/2K5?

A: Both are dual-circuit, rail-to-rail amplifiers in 8-pin surface-mount packages. The OPA2340EA/2K5 offers higher slew rate (6 V/µs vs. 5 V/µs), higher gain bandwidth product (5.5 MHz vs. 3 MHz), and lower input offset voltage (150 µV vs. 25 mV). The OPA2340EA/2K5 operates to 125°C versus 85°C for the original part. The package is 8-VSSOP rather than 8-MSOP, requiring PCB layout verification for pin compatibility.

Q: Is the MCP6L72T-E/MS suitable for high-speed applications?

A: No. The MCP6L72T-E/MS has lower slew rate (0.9 V/µs vs. 5 V/µs) and lower gain bandwidth product (2 MHz vs. 3 MHz) than the AD8532ARMZ-R2. This part is optimized for low-power operation rather than speed. It is suitable for applications where power consumption is the primary concern and bandwidth requirements are modest.

Q: What is the significance of the different package types (8-MSOP, 8-VSSOP, 8-MiniSO)?

A: All three package types are 8-pin surface-mount packages with 0.118" (3.00 mm) width, but they have different pin spacing and footprint dimensions. While pinout is functionally equivalent, PCB layout and footprint libraries must be verified before substitution. The 8-MSOP is the original package for the AD8532ARMZ-R2. The 8-VSSOP (used by OPA2340 and OPA2343 series) and 8-MiniSO (used by STMicroelectronics parts) require confirmation of PCB compatibility.

Q: Which substitute part offers the lowest power consumption?

A: The TSU102IST offers the lowest supply current at 650 nA (x2 channels). However, this part has extremely limited bandwidth (9 kHz) and slew rate (0.003 V/µs), making it suitable only for DC or very low-frequency applications. For moderate bandwidth applications, the MCP6L72T-E/MS provides 150 µA supply current with 2 MHz bandwidth.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All substitute parts listed are ROHS3 compliant. The original AD8532ARMZ-R2 does not specify RoHS status, but the AD8532ARMZ-REEL (direct replacement) is ROHS3 compliant.

Q: What is the operating temperature range consideration for substitution?

A: The AD8532ARMZ-R2 operates from -40°C to 85°C. Several substitutes (MCP6L72T-E/MS, OPA2340EA/2K5, TS1852IST, TS1872AIST) extend to 125°C, providing wider temperature margin. The OPA2343EA/2K5 and TSU102IST maintain the same 85°C upper limit. For applications operating near the upper temperature limit, extended-range parts provide additional design margin.

Q: Can the TS1852IST or TS1872AIST be used in place of the AD8532ARMZ-R2?

A: These parts are functionally compatible as dual-circuit, rail-to-rail amplifiers in 8-pin surface-mount packages. However, they have significantly lower slew rate and bandwidth. The TS1852IST provides 0.25 V/µs slew rate and 630 kHz bandwidth, while the TS1872AIST provides 0.6 V/µs slew rate and 1.8 MHz bandwidth. These are suitable only for applications where the original part's 5 V/µs slew rate and 3 MHz bandwidth are not required.

Q: What inventory considerations should be evaluated?

A: The AD8532ARMZ-REEL has 12,162 units in stock, providing immediate availability. The OPA2340EA/2K5 has the highest inventory at 30,200 units. The TS1872AIST has 3,902 units, TS1852IST has 9,400 units, and TSU102IST has 1,221 units. For long-term production requirements, parts with higher inventory and active status provide supply chain security.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message