AD8510AR Equivalent & Substitute Parts

Part Overview

The AD8510AR is a J-FET operational amplifier manufactured by Analog Devices Inc., housed in an 8-SOIC surface mount package. This device is classified as obsolete and operates across a supply voltage range of 9V to 36V with an operating temperature range of -40°C to 125°C. The AD8510AR delivers a slew rate of 20V/µs and a gain bandwidth product of 8 MHz, making it suitable for precision signal conditioning and low-noise amplification applications.

Due to its obsolete product status, direct equivalents and functional substitutes are necessary for new designs and production continuity. Active alternatives with comparable or enhanced electrical characteristics are available from Analog Devices Inc. and Texas Instruments, offering improved availability and compliance certifications.

Key Parameters

Parameter	Value	Unit
Amplifier Type	J-FET	—
Number of Circuits	1	—
Slew Rate	20	V/µs
Gain Bandwidth Product	8	MHz
Current - Input Bias	25	pA
Voltage - Input Offset	100	µV
Current - Supply	2.2	mA
Current - Output / Channel	70	mA
Voltage - Supply Span (Min)	9	V
Voltage - Supply Span (Max)	36	V
Operating Temperature	-40 to 125	°C
Package / Case	8-SOIC (0.154", 3.90mm Width)	—
Mounting Type	Surface Mount	—

Substitute Part Grouping Explanation

Substitution of the AD8510AR is determined by strict alignment of electrical and mechanical parameters. The primary substitution criteria are:

Critical Parameters for Substitution:

Amplifier Type: J-FET topology
Number of Circuits: Single circuit configuration
Package / Case: 8-SOIC form factor with 0.154" (3.90mm) width
Mounting Type: Surface mount compatibility
Supply Voltage Range: Minimum 9V and maximum 36V capability
Operating Temperature Range: Support for -40°C to 125°C or compatible subset

Performance Parameters:

Slew Rate: 20V/µs or greater
Gain Bandwidth Product: 8 MHz or greater
Input Bias Current: 25 pA or lower
Input Offset Voltage: 100 µV or lower
Supply Current: 2.2 mA or lower
Output Current: 70 mA or greater

Substitutes are grouped into two categories: direct equivalents (identical base part number with different packaging) and similar alternatives (different base part numbers meeting or exceeding all critical electrical parameters within the same package family).

Parameter Comparison

Part Number	Manufacturer	Product Status	Slew Rate (V/µs)	GBW (MHz)	Input Bias (pA)	Input Offset (µV)	Supply Current (mA)	Output Current (mA)	Supply Min (V)	Supply Max (V)	Temp Range (°C)	Package
AD8510AR	Analog Devices	Obsolete	20	8	25	100	2.2	70	9	36	-40 to 125	8-SOIC
AD8510ARZ	Analog Devices	Active	20	8	25	100	2.2	70	9	36	-40 to 125	8-SOIC
ADA4610-1ARZ	Analog Devices	Active	61	16.3	5	400	1.6	79	9	30	-40 to 125	8-SOIC
LT1055S8	Analog Devices	Active	12	4.5	30	500	2.8	—	10	36	0 to 70	8-SOIC
LT1792CS8#PBF	Analog Devices	Active	3.4	5.6	300	200	4.2	—	9	40	0 to 70	8-SOIC
LT1792CS8#TRPBF	Analog Devices	Active	3.4	5.6	300	200	4.2	—	9	40	0 to 70	8-SOIC
LT1792IS8#PBF	Analog Devices	Active	3.4	5.6	300	200	4.2	—	9	40	-40 to 85	8-SOIC
LT1792IS8#TRPBF	Analog Devices	Active	3.4	5.6	300	200	4.2	—	9	40	-40 to 85	8-SOIC
LF356M	Texas Instruments	Last Time Buy	12	5	30	3000	5	—	30	30	0 to 70	8-SOIC
LF356M/NOPB	Texas Instruments	Active	12	5	30	3000	5	—	30	30	0 to 70	8-SOIC
LF356MX/NOPB	Texas Instruments	Active	12	5	30	3000	5	—	30	30	0 to 70	8-SOIC

Engineering Selection Recommendations

Direct Equivalent (Recommended Primary Substitute):

The AD8510ARZ is the direct functional equivalent of the AD8510AR. Both devices share identical electrical specifications, including slew rate, gain bandwidth product, input bias current, input offset voltage, supply current, and output current. The AD8510ARZ is currently in active production status with ROHS3 compliance and REACH unaffected certification. This part is available in tube packaging and represents the optimal substitution path for obsolete AD8510AR applications.

Enhanced Performance Alternative:

The ADA4610-1ARZ offers superior electrical performance with a higher slew rate (61V/µs versus 20V/µs), increased gain bandwidth product (16.3 MHz versus 8 MHz), and lower input bias current (5 pA versus 25 pA). This device maintains the same 8-SOIC package and -40°C to 125°C operating temperature range. The ADA4610-1ARZ includes rail-to-rail output capability and is ROHS3 compliant. The maximum supply voltage is reduced to 30V (versus 36V for AD8510AR), which must be verified for application compatibility.

Alternative Substitutes with Reduced Performance:

The LT1055S8, LT1792 series (CS8#PBF, CS8#TRPBF, IS8#PBF, IS8#TRPBF), and LF356 series (M, M/NOPB, MX/NOPB) are J-FET operational amplifiers in 8-SOIC packages. These alternatives exhibit reduced slew rates and gain bandwidth products compared to the AD8510AR. The LT1055S8 operates at 0°C to 70°C, limiting use in extended temperature applications. The LT1792 series operates at 0°C to 70°C (CS8 variants) or -40°C to 85°C (IS8 variants), neither fully matching the -40°C to 125°C range of the original part. The LF356 series from Texas Instruments operates at 0°C to 70°C and requires fixed ±15V supply voltages, making it unsuitable for the 9V to 36V range of the AD8510AR.

Compliance and Availability:

All recommended substitutes carry ROHS3 compliance and REACH unaffected status. The AD8510ARZ maintains the highest inventory availability (8800 units) and identical specifications. The ADA4610-1ARZ provides enhanced performance with 1310 units in stock. Alternative parts from the LT1792 and LF356 families are available in higher quantities but with reduced electrical performance and narrower operating ranges.

Frequently Asked Questions (FAQ)

Q: Can the AD8510ARZ be used as a direct replacement for the AD8510AR?

A: Yes. The AD8510ARZ is electrically identical to the AD8510AR across all specified parameters: slew rate, gain bandwidth product, input bias current, input offset voltage, supply current, output current, and operating temperature range. The primary difference is product status (active versus obsolete) and packaging format (tube). Both devices are housed in 8-SOIC packages with identical pinouts and electrical performance.

Q: What are the key differences between the AD8510AR and the ADA4610-1ARZ?

A: The ADA4610-1ARZ provides enhanced performance in three areas: slew rate (61V/µs versus 20V/µs), gain bandwidth product (16.3 MHz versus 8 MHz), and input bias current (5 pA versus 25 pA). The ADA4610-1ARZ includes rail-to-rail output capability. The maximum supply voltage is reduced from 36V to 30V. Both devices support the -40°C to 125°C operating temperature range and use the 8-SOIC package.

Q: Why are the LT1055S8 and LT1792 series not recommended as primary substitutes?

A: The LT1055S8 and LT1792 series exhibit significantly reduced slew rates (12V/µs and 3.4V/µs respectively, compared to 20V/µs) and lower gain bandwidth products (4.5 MHz and 5.6 MHz respectively, compared to 8 MHz). Additionally, these devices operate at reduced temperature ranges (0°C to 70°C for LT1055S8 and LT1792 CS8 variants; -40°C to 85°C for LT1792 IS8 variants), which do not fully cover the -40°C to 125°C range of the AD8510AR. These alternatives are suitable only for applications with relaxed performance and temperature requirements.

Q: Can the LF356 series replace the AD8510AR?

A: The LF356 series is not recommended as a substitute. The LF356M, LF356M/NOPB, and LF356MX/NOPB operate at fixed ±15V supply voltages (30V total span), which is incompatible with the AD8510AR's 9V to 36V supply range. Additionally, the LF356 series exhibits a significantly higher input offset voltage (3000 µV versus 100 µV) and operates only at 0°C to 70°C. The LF356M is classified as Last Time Buy, indicating discontinued production.

Q: What packaging options are available for AD8510 equivalents?

A: The AD8510ARZ is available in tube packaging. The ADA4610-1ARZ is supplied in tube packaging. The LT1792 series is available in both tube (CS8#PBF, IS8#PBF) and tape & reel (CS8#TRPBF, IS8#TRPBF) formats. The LF356 series is available in tube (LF356M, LF356M/NOPB) and cut tape with Digi-Reel (LF356MX/NOPB) formats. All devices maintain the 8-SOIC surface mount package form factor.

Q: Are all substitute parts RoHS compliant?

A: The AD8510ARZ, ADA4610-1ARZ, LT1792 series, and LF356M/NOPB and LF356MX/NOPB are ROHS3 compliant. The LF356M is classified as RoHS non-compliant. All listed substitutes are REACH unaffected.

Q: What is the moisture sensitivity level for these devices?

A: All listed devices, including the AD8510AR and all substitutes, carry a Moisture Sensitivity Level (MSL) of 1 (Unlimited), indicating no moisture sensitivity restrictions for storage and handling.

Q: Which substitute offers the best performance improvement over the AD8510AR?

A: The ADA4610-1ARZ provides the most significant performance enhancement, with a 3× increase in slew rate (61V/µs versus 20V/µs) and a 2× increase in gain bandwidth product (16.3 MHz versus 8 MHz). The input bias current is reduced by a factor of 5 (5 pA versus 25 pA). These improvements make the ADA4610-1ARZ suitable for high-speed signal conditioning and precision measurement applications. The maximum supply voltage limitation (30V versus 36V) must be verified for compatibility with existing power supply designs.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message