AD8226ARZ Equivalent & Substitute Parts

Part Overview

The AD8226ARZ is an instrumentation amplifier manufactured by Analog Devices Inc., designed for precision signal conditioning applications. This single-circuit, rail-to-rail amplifier operates across a wide supply voltage range of 2.2 V to 36 V and maintains active product status with full RoHS3 compliance. The device is packaged in an 8-SOIC surface-mount configuration with unlimited moisture sensitivity rating (MSL 1).

Substitute parts are identified when equivalent functional performance can be achieved within the specified electrical and mechanical parameters, allowing for design flexibility, inventory optimization, or supply chain continuity.

Substiute Parts

AD8226ARZ

Analog Devices Inc.In Stock: 9067AD8226ARZ Datasheet

Current PartRFQ

ADA4622-2ARZ

Analog Devices Inc.In Stock: 50318ADA4622-2ARZ Datasheet

SimilarRFQ

INA826AID

Texas InstrumentsIn Stock: 10470INA826AID Datasheet

SimilarRFQ

INA826AIDR

Texas InstrumentsIn Stock: 45120INA826AIDR Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the AD8226ARZ is determined by the following critical parameters:

Primary Substitution Criteria:

• Amplifier Type: Instrumentation
• Number of Circuits: 1
• Output Type: Rail-to-Rail
• Package / Case: 8-SOIC (0.154", 3.90mm Width)
• Mounting Type: Surface Mount
• Operating Temperature Range: -40°C to 125°C
• Supply Voltage Compatibility: Minimum 2.2 V to Maximum 36 V

Secondary Compatibility Factors:

• RoHS3 Compliance
• REACH Unaffected Status
• Electrical performance within application tolerance

The substitute parts listed below satisfy the primary substitution criteria and maintain compatibility with the mechanical and environmental specifications of the AD8226ARZ.

Parameter Comparison

Engineering Selection Recommendations

INA826AIDR and INA826AID (Texas Instruments)

The INA826 series represents the closest functional equivalent to the AD8226ARZ. Both devices are single-circuit instrumentation amplifiers with rail-to-rail output in 8-SOIC packaging. The INA826 series maintains full RoHS3 compliance and operates across the required temperature range. The minimum supply voltage requirement of 2.7 V is compatible with most applications designed for the AD8226ARZ, with the exception of systems requiring operation below 2.7 V. The INA826AIDR variant is supplied in Cut Tape and Digi-Reel packaging, while the INA826AID is supplied in Tube packaging. Both variants share identical electrical specifications.

ADA4622-2ARZ (Analog Devices Inc.)

The ADA4622-2ARZ is a dual-circuit J-FET amplifier with rail-to-rail output in 8-SOIC packaging. While this device shares the same manufacturer and package as the AD8226ARZ, it differs in amplifier topology (J-FET versus Instrumentation) and circuit count (2 versus 1). The ADA4622-2ARZ exhibits superior performance in slew rate (23 V/µs versus 0.6 V/µs) and bandwidth (15.5 MHz versus 1.5 MHz). The minimum supply voltage requirement of 5 V restricts compatibility to applications with higher supply voltages. This device is suitable only for applications where the dual-circuit configuration and J-FET characteristics provide functional advantage.

All substitute parts maintain active product status, RoHS3 compliance, and REACH unaffected status, ensuring regulatory and supply chain continuity.

Frequently Asked Questions (FAQ)

Q: Can the INA826AIDR directly replace the AD8226ARZ in all applications?

A: The INA826AIDR is mechanically and functionally compatible with the AD8226ARZ in applications where the minimum supply voltage of 2.7 V is acceptable. Applications requiring operation below 2.7 V require the AD8226ARZ due to its 2.2 V minimum supply specification. Both devices are single-circuit instrumentation amplifiers in 8-SOIC packaging with identical operating temperature ranges and RoHS3 compliance.

Q: What is the difference between INA826AIDR and INA826AID?

A: The INA826AIDR and INA826AID are electrically identical instrumentation amplifiers from Texas Instruments. The primary difference is packaging format: INA826AIDR is supplied in Cut Tape and Digi-Reel format, while INA826AID is supplied in Tube format. Selection between these variants depends on assembly process requirements and inventory management practices.

Q: Is the ADA4622-2ARZ suitable as a substitute for the AD8226ARZ?

A: The ADA4622-2ARZ shares the same 8-SOIC package and manufacturer as the AD8226ARZ but differs in fundamental design. The ADA4622-2ARZ is a dual-circuit J-FET amplifier with a minimum supply voltage of 5 V, compared to the AD8226ARZ single-circuit instrumentation amplifier with 2.2 V minimum supply. Substitution is limited to applications where dual-circuit configuration and J-FET characteristics provide functional advantage and supply voltage exceeds 5 V.

Q: What are the moisture sensitivity implications of selecting substitute parts?

A: The AD8226ARZ and ADA4622-2ARZ both carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions. The INA826AIDR and INA826AID carry MSL 2 (1 Year) rating, requiring storage and handling within controlled moisture environments for one year from manufacturing. Applications with extended storage periods or high-humidity environments should prioritize MSL 1 rated devices.

Q: Are all substitute parts RoHS3 compliant?

A: All listed substitute parts—INA826AIDR, INA826AID, and ADA4622-2ARZ—are RoHS3 compliant and REACH unaffected, matching the regulatory status of the AD8226ARZ. This ensures compatibility with environmental and regulatory requirements across all substitute options.

Q: How do the electrical performance specifications compare between substitutes?

A: The INA826 series (INA826AIDR and INA826AID) maintains similar instrumentation amplifier performance to the AD8226ARZ with comparable slew rate (1 V/µs versus 0.6 V/µs) and bandwidth (1 MHz versus 1.5 MHz). The ADA4622-2ARZ exhibits significantly higher performance metrics (23 V/µs slew rate, 15.5 MHz bandwidth) due to J-FET topology but requires higher minimum supply voltage (5 V versus 2.2 V). Selection depends on application bandwidth and slew rate requirements.