AD8067ARTZ-R2 Equivalent & Substitute Parts

Part Overview

The AD8067ARTZ-R2 is a voltage feedback operational amplifier manufactured by Analog Devices Inc., designed for rail-to-rail signal conditioning applications. This single-circuit device operates across a 5V to 24V supply range with a slew rate of 640V/µs and -3dB bandwidth of 54 MHz, housed in a SOT-23-5 surface mount package.

The AD8067ARTZ-R2 is currently discontinued at DiGi Electronics. Locating equivalent or substitute components is necessary for ongoing production support, design continuity, and procurement planning. Direct manufacturer alternatives with identical electrical specifications and package compatibility are available.

Substiute Parts

AD8067ARTZ-R2

Analog Devices Inc.In Stock: 1074AD8067ARTZ-R2 Datasheet

Current PartRFQ

AD8067ARTZ-REEL7

Analog Devices Inc.In Stock: 1568AD8067ARTZ-REEL7 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the AD8067ARTZ-R2 is determined by strict equivalence across the following critical parameters:

Electrical Specifications:

• Amplifier topology (Voltage Feedback)
• Single-circuit configuration
• Rail-to-rail output capability
• Slew rate (640V/µs)
• Bandwidth (-3dB at 54 MHz)
• Input bias current (0.6 pA)
• Input offset voltage (200 µV)
• Supply current (6.6 mA)
• Output current per channel (26 mA)
• Supply voltage range (5V to 24V)
• Operating temperature range (-40°C to 85°C)

Package and Mechanical Requirements:

• Surface mount technology
• SOT-23-5 package designation
• SC-74A / SOT-753 case style

The AD8067ARTZ-REEL7 is a direct manufacturer equivalent that maintains identical electrical performance and package specifications. The primary distinction is packaging format and product status.

Parameter Comparison

Engineering Selection Recommendations

AD8067ARTZ-REEL7 as Primary Substitute:

The AD8067ARTZ-REEL7 is the direct equivalent for the discontinued AD8067ARTZ-R2. All electrical specifications, thermal characteristics, and package dimensions are identical. The substitute maintains full compatibility with existing PCB designs and assembly processes.

Compliance and Certification Status:

The AD8067ARTZ-REEL7 carries Active product status with RoHS3 compliance certification, whereas the original AD8067ARTZ-R2 is discontinued. Both components are REACH Unaffected and classified under ECCN EAR99. The substitute component is suitable for new production runs and long-term supply chain planning.

Packaging Consideration:

The AD8067ARTZ-REEL7 is supplied in Cut Tape (CT) and Digi-Reel® format, whereas the AD8067ARTZ-R2 was supplied in tube packaging. This difference affects procurement and assembly logistics but does not impact electrical or mechanical performance. Component-level specifications remain unchanged.

Frequently Asked Questions (FAQ)

Q: Can the AD8067ARTZ-REEL7 be used as a direct replacement for the AD8067ARTZ-R2 in existing designs?

A: Yes. The AD8067ARTZ-REEL7 is electrically and mechanically identical to the AD8067ARTZ-R2. All electrical parameters, operating ranges, and package specifications match exactly. No design modifications are required.

Q: What is the difference between the two part numbers?

A: The primary difference is packaging format and product status. The AD8067ARTZ-R2 was supplied in tube packaging and is now discontinued. The AD8067ARTZ-REEL7 is supplied in Cut Tape (CT) and Digi-Reel® format and maintains Active product status with RoHS3 compliance.

Q: Are there any thermal or performance differences between these parts?

A: No. Both components operate across the identical temperature range (-40°C to 85°C) and deliver identical electrical performance. Slew rate, bandwidth, supply current, and output current specifications are unchanged.

Q: Is the SOT-23-5 package compatible with existing PCB layouts?

A: Yes. Both the AD8067ARTZ-R2 and AD8067ARTZ-REEL7 use the SC-74A / SOT-753 case style, which is the standard SOT-23-5 surface mount package. PCB footprints and assembly processes remain unchanged.

Q: What is the moisture sensitivity level for the substitute part?

A: Both components carry MSL 1 (Unlimited) classification, indicating no moisture sensitivity restrictions during storage or handling.

Q: Does the substitute part meet the same compliance standards?

A: The AD8067ARTZ-REEL7 meets RoHS3 compliance and is REACH Unaffected. Both components are classified under ECCN EAR99. Compliance certifications are equivalent or superior to the original part.