AD8065ART-REEL Equivalent & Substitute Parts

Part Overview

The AD8065ART-REEL is a voltage feedback operational amplifier manufactured by Analog Devices Inc., designed for rail-to-rail signal processing applications. This device integrates a single amplifier circuit in a compact SOT-23-5 surface mount package and is part of the FastFET™ series. The AD8065ART-REEL is classified as obsolete, making identification of equivalent and substitute parts essential for ongoing design support, production continuity, and system maintenance.

Substiute Parts

AD8065ART-REEL

Analog Devices Inc.In Stock: 1008AD8065ART-REEL Datasheet

Current PartRFQ

AD8065ARTZ-REEL

Analog Devices Inc.In Stock: 9054AD8065ARTZ-REEL Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the AD8065ART-REEL is determined by strict equivalence across the following critical parameters:

Electrical Specifications:

• Amplifier Type: Voltage Feedback
• Number of Circuits: 1
• Output Type: Rail-to-Rail
• Slew Rate: 180 V/µs
• -3dB Bandwidth: 145 MHz
• Current - Input Bias: 3 pA
• Voltage - Input Offset: 400 µV
• Current - Supply: 6.6 mA
• Current - Output / Channel: 30 mA
• Voltage - Supply Span: 5 V to 24 V
• Operating Temperature Range: -40°C to 85°C

Mechanical and Packaging Specifications:

• Package / Case: SC-74A, SOT-753
• Supplier Device Package: SOT-23-5
• Mounting Type: Surface Mount

Manufacturer and Series:

• Manufacturer: Analog Devices Inc.
• Base Product Number: AD8065
• Series: FastFET™

Substitute parts must match all electrical specifications, package configuration, and mounting requirements to ensure functional and physical compatibility in existing designs.

Parameter Comparison

Engineering Selection Recommendations

The AD8065ARTZ-REEL is the direct substitute for the obsolete AD8065ART-REEL. Both parts share identical electrical and mechanical specifications, ensuring pin-for-pin and functional compatibility.

Key Differentiation:

The AD8065ARTZ-REEL carries an Active product status, whereas the AD8065ART-REEL is classified as Obsolete. This distinction is critical for long-term supply chain planning and design continuity. The substitute part is certified ROHS3 Compliant and carries REACH Unaffected status, providing enhanced environmental and regulatory compliance documentation.

Both parts are manufactured by Analog Devices Inc., belong to the FastFET™ series, and are supplied in identical packaging configurations (SOT-23-5). The electrical performance metrics—including slew rate, bandwidth, input bias current, and supply voltage range—are identical across both variants.

For new designs, production restocking, or system maintenance requiring the AD8065 voltage feedback amplifier in SOT-23-5 packaging, the AD8065ARTZ-REEL is the appropriate selection due to its active product status and regulatory compliance certifications.

Frequently Asked Questions (FAQ)

Q: Can the AD8065ARTZ-REEL be used as a direct replacement for the AD8065ART-REEL?

A: Yes. The AD8065ARTZ-REEL is a direct substitute. Both parts are manufactured by Analog Devices Inc., share identical electrical specifications, and are packaged in the same SOT-23-5 configuration. Pin-for-pin and functional compatibility is guaranteed.

Q: What is the difference between AD8065ART-REEL and AD8065ARTZ-REEL?

A: The primary difference is product status. The AD8065ART-REEL is classified as Obsolete, while the AD8065ARTZ-REEL is Active. The substitute part also includes ROHS3 Compliance and REACH Unaffected certifications. All electrical and mechanical specifications are identical.

Q: Why is the AD8065ART-REEL listed as Obsolete?

A: Obsolete status indicates that the manufacturer has discontinued production of this specific part number variant. The AD8065ARTZ-REEL represents the current production equivalent with identical performance characteristics.

Q: Are there any electrical performance differences between these two parts?

A: No. Both parts exhibit identical electrical performance across all specified parameters: slew rate (180 V/µs), bandwidth (145 MHz), input bias current (3 pA), input offset voltage (400 µV), supply current (6.6 mA), output current (30 mA), and operating temperature range (-40°C to 85°C).

Q: Can these parts be used interchangeably in PCB designs?

A: Yes. Both parts use the SOT-23-5 package (SC-74A, SOT-753) and are surface mount devices. PCB footprints, solder pad layouts, and component placement are identical. No design modifications are required.

Q: What is the significance of the ROHS3 Compliance certification on the AD8065ARTZ-REEL?

A: ROHS3 Compliance indicates that the substitute part meets the Restriction of Hazardous Substances Directive requirements, confirming the absence of restricted materials in the component composition and manufacturing process.

Q: Does the packaging format differ between these parts?

A: The packaging format is identical. Both parts are supplied in SOT-23-5 surface mount packages. The AD8065ARTZ-REEL is available in Cut Tape (CT) and Digi-Reel® formats, providing flexibility in procurement quantities.

Q: What is the operating temperature range for both parts?

A: Both the AD8065ART-REEL and AD8065ARTZ-REEL operate across the temperature range of -40°C to 85°C, ensuring compatibility in industrial and commercial applications.

Q: Are there any supply voltage differences between these parts?

A: No. Both parts accept supply voltages ranging from 5 V to 24 V, providing identical flexibility in power supply design and system integration.