AD8034ARTZ-REEL Equivalent & Substitute Parts

Part Overview

The AD8034ARTZ-REEL is a voltage feedback operational amplifier manufactured by Analog Devices Inc., configured as a dual-channel (2 circuit) rail-to-rail output device in SOT-23-8 surface mount packaging. This component belongs to the FastFET™ series and is classified as a linear amplifier for general-purpose signal conditioning and buffering applications.

The AD8034ARTZ-REEL is currently listed as obsolete. Locating equivalent or substitute components becomes necessary when original stock is depleted or when design revisions require active product status for long-term supply chain reliability and manufacturing support.

Substiute Parts

AD8034ARTZ-REEL

Analog Devices Inc.In Stock: 1137AD8034ARTZ-REEL Datasheet

Current PartRFQ

AD8034ARTZ-REEL7

Analog Devices Inc.In Stock: 7355AD8034ARTZ-REEL7 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the AD8034ARTZ-REEL is determined by electrical and mechanical parameter equivalence across the following critical criteria:

Electrical Parameters:

• Amplifier topology (voltage feedback architecture)
• Dual-channel configuration (2 circuits)
• Rail-to-rail output capability
• Slew rate (80 V/µs minimum)
• Bandwidth (-3dB at 80 MHz minimum)
• Input bias current (2 pA maximum)
• Input offset voltage (1 mV maximum)
• Supply current per channel (3.3 mA maximum)
• Output current per channel (60 mA minimum)
• Supply voltage range (5 V to 24 V)
• Operating temperature range (-40°C to 85°C)

Mechanical Parameters:

• Package type: SOT-23-8
• Mounting: Surface mount
• Moisture sensitivity: MSL 1 (Unlimited)

Substitute parts must match all electrical specifications and maintain identical mechanical packaging to ensure direct board-level compatibility without design modification.

Parameter Comparison

Engineering Selection Recommendations

AD8034ARTZ-REEL7 is the direct substitute for AD8034ARTZ-REEL. Both components are manufactured by Analog Devices Inc. and share identical electrical and mechanical specifications across all critical parameters.

The primary distinction between these parts is product status and compliance certification:

• AD8034ARTZ-REEL: Obsolete status. No active manufacturing or long-term supply guarantees.
• AD8034ARTZ-REEL7: Active product status. RoHS3 compliant and REACH unaffected, indicating current manufacturing compliance with environmental and hazardous substance regulations.

For new designs or production continuity, AD8034ARTZ-REEL7 is the appropriate selection. The active product status ensures availability, manufacturing support, and compliance with current regulatory requirements. Both parts are electrically and mechanically interchangeable at the board level without design modification.

Frequently Asked Questions (FAQ)

Q: Can AD8034ARTZ-REEL7 be used as a direct replacement for AD8034ARTZ-REEL?

A: Yes. Both components are identical in electrical performance and mechanical packaging. All specifications—including slew rate, bandwidth, supply current, output current, and operating temperature range—are equivalent. Direct substitution is possible without circuit modification.

Q: What is the difference between AD8034ARTZ-REEL and AD8034ARTZ-REEL7?

A: The primary difference is product status. AD8034ARTZ-REEL is obsolete, while AD8034ARTZ-REEL7 is active. AD8034ARTZ-REEL7 carries RoHS3 compliance and REACH unaffected status, indicating current manufacturing and regulatory compliance. Electrical and mechanical specifications are identical.

Q: Are there packaging differences between these parts?

A: Both parts use SOT-23-8 surface mount packaging. AD8034ARTZ-REEL is supplied on reel, while AD8034ARTZ-REEL7 is available in Cut Tape (CT) and Digi-Reel® formats. The physical component and pinout are identical; only the supply format differs.

Q: What does MSL 1 (Unlimited) mean?

A: Moisture Sensitivity Level 1 indicates the component has unlimited shelf life under standard storage conditions. No special moisture control or baking procedures are required before soldering.

Q: Can these parts be used in designs requiring RoHS compliance?

A: AD8034ARTZ-REEL7 is RoHS3 compliant. AD8034ARTZ-REEL does not carry this certification. For applications requiring RoHS compliance, AD8034ARTZ-REEL7 is the appropriate selection.

Q: What is the base product number for these components?

A: The base product number is AD8034. Both AD8034ARTZ-REEL and AD8034ARTZ-REEL7 are variants of this base device, differentiated by packaging and product status.

Q: Are these dual-channel amplifiers suitable for stereo audio applications?

A: The AD8034 is a dual-channel voltage feedback amplifier with rail-to-rail output, 80 MHz bandwidth, and 80 V/µs slew rate. These specifications support audio-frequency signal conditioning. Application suitability depends on specific circuit requirements and frequency response needs.

Q: What is the maximum supply voltage for these amplifiers?

A: The maximum supply voltage span is 24 V. The minimum supply voltage span is 5 V. Operation within this range ensures specified performance across all electrical parameters.