AD8032ARM-REEL7 Equivalent & Substitute Parts

Part Overview

The AD8032ARM-REEL7 is a voltage feedback amplifier integrated circuit manufactured by Analog Devices Inc., configured as a dual-channel (2 circuit) operational amplifier in an 8-MSOP surface mount package. This device features rail-to-rail output capability and is designed for general-purpose signal conditioning and amplification applications requiring moderate bandwidth and slew rate performance.

The AD8032ARM-REEL7 is classified as obsolete. Identification of equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production requirements for systems utilizing this component.

Key Parameters

Parameter	Value	Unit
Amplifier Type	Voltage Feedback	—
Number of Circuits	2	—
Output Type	Rail-to-Rail	—
Slew Rate	35	V/µs
-3dB Bandwidth	80	MHz
Current - Input Bias	450	nA
Voltage - Input Offset	1	mV
Current - Supply (per Channel)	900	µA
Current - Output / Channel	15	mA
Voltage - Supply Span (Min)	2.7	V
Voltage - Supply Span (Max)	12	V
Operating Temperature Range	-40 to 85	°C
Mounting Type	Surface Mount	—
Package / Case	8-MSOP (0.118", 3.00mm Width)	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution of the AD8032ARM-REEL7 is determined by electrical and mechanical compatibility across the following critical parameters:

Electrical Compatibility Criteria:

Amplifier type (voltage feedback architecture)
Number of circuits (dual-channel configuration)
Output type (rail-to-rail capability)
Supply voltage range (minimum 2.7 V, maximum 12 V)
Operating temperature range (-40°C to 85°C minimum)
Package type (8-MSOP or equivalent 8-pin surface mount)

Performance Parameters: Substitute parts must maintain functional equivalence within the application context. Slew rate, bandwidth, input bias current, and output current are performance characteristics that determine suitability for specific signal conditioning tasks. Parts with equal or superior performance in these parameters are considered direct or near-direct substitutes.

Direct Substitutes (Identical Electrical and Mechanical Specifications):

AD8032ARMZ-REEL7: Active product status, identical specifications, ROHS3 compliant

Similar Substitutes (Compatible Electrical Parameters with Performance Variations):

ADA4807-2ARMZ-R7: Enhanced performance (higher slew rate, bandwidth, output current)
LMH6646MM/NOPB and LMH6646MMX/NOPB: Slightly reduced performance (lower slew rate, bandwidth)
OPA2830IDGKT and OPA2830IDGKR: Significantly enhanced performance (higher slew rate, bandwidth, output current)
LMP7708MME/NOPB: General-purpose amplifier with different performance profile
MAX4392EUA+: Video amplifier with significantly enhanced slew rate and bandwidth

Parameter Comparison

Part Number	Manufacturer	Product Status	Slew Rate (V/µs)	-3dB Bandwidth (MHz)	Input Bias (nA)	Input Offset (mV)	Supply Current (µA)	Output Current (mA)	Temp Range (°C)	Package
AD8032ARM-REEL7	Analog Devices	Obsolete	35	80	450	1	900	15	-40 to 85	8-MSOP
AD8032ARMZ-REEL7	Analog Devices	Active	35	80	450	1	900	15	-40 to 85	8-MSOP
ADA4807-2ARMZ-R7	Analog Devices	Active	250	180	1200	0.14	1000	80	-40 to 125	8-MSOP
LMH6646MM/NOPB	Texas Instruments	Active	22	55	650	1	725	20	-40 to 85	8-VSSOP
LMH6646MMX/NOPB	Texas Instruments	Active	22	55	650	1	725	20	-40 to 85	8-VSSOP
OPA2830IDGKT	Texas Instruments	Last Time Buy	560	290	5000	1.5	8500	82	-40 to 85	8-VSSOP
OPA2830IDGKR	Texas Instruments	Active	560	290	5000	1.5	8500	82	-40 to 85	8-VSSOP
LMP7708MME/NOPB	Texas Instruments	Active	5.9	15	0.2	0.037	1500	86	-40 to 125	8-VSSOP
MAX4392EUA+	Analog Devices/Maxim	Active	500	85	—	—	6000	95	—	8-uMAX/uSOP

Engineering Selection Recommendations

Direct Replacement (Recommended for Obsolete Part Mitigation):

AD8032ARMZ-REEL7 is the primary recommended substitute for AD8032ARM-REEL7. This part maintains identical electrical specifications and mechanical compatibility while offering active product status and ROHS3 compliance. The transition from reel packaging (AD8032ARM-REEL7) to cut tape and digi-reel packaging (AD8032ARMZ-REEL7) presents no functional impact on component performance or board-level integration.

Performance-Enhanced Alternatives (When Application Requirements Permit):

ADA4807-2ARMZ-R7 and OPA2830IDGKR provide significantly enhanced performance characteristics including higher slew rate, bandwidth, and output current capability. These parts are suitable for applications requiring improved signal fidelity, faster transient response, or higher load-driving capability. Both parts maintain the required supply voltage range and operating temperature compatibility with the original design. OPA2830IDGKR offers active product status, while OPA2830IDGKT is designated as Last Time Buy.

Compliance and Certification Status:

All recommended substitute parts carry ROHS3 compliance and REACH unaffected status, meeting current regulatory requirements for electronic component procurement. Moisture sensitivity level remains at MSL 1 (Unlimited) for Analog Devices parts and MSL 1-2 for Texas Instruments alternatives, indicating no special handling requirements beyond standard ESD precautions.

Package Consideration:

The original AD8032ARM-REEL7 utilizes 8-MSOP packaging. AD8032ARMZ-REEL7 maintains this package specification. Alternative parts from Texas Instruments (LMH6646, OPA2830, LMP7708) utilize 8-VSSOP packaging, which is mechanically compatible with 8-MSOP footprints on printed circuit boards. MAX4392EUA+ uses 8-uMAX/uSOP packaging, also compatible with standard 8-pin MSOP board layouts.

Frequently Asked Questions (FAQ)

Q: Can AD8032ARMZ-REEL7 be used as a direct replacement for AD8032ARM-REEL7?

A: Yes. AD8032ARMZ-REEL7 is a direct electrical and mechanical equivalent. The primary difference is product status (active versus obsolete) and packaging format (cut tape and digi-reel versus reel). All electrical specifications, operating parameters, and package dimensions are identical. This part is the recommended substitute for obsolete inventory mitigation.

Q: What is the difference between AD8032ARM-REEL7 and ADA4807-2ARMZ-R7?

A: Both are dual-channel voltage feedback amplifiers in 8-MSOP packages with rail-to-rail output. ADA4807-2ARMZ-R7 provides enhanced performance: slew rate of 250 V/µs versus 35 V/µs, bandwidth of 180 MHz versus 80 MHz, and output current of 80 mA versus 15 mA per channel. ADA4807-2ARMZ-R7 also supports extended operating temperature range (-40°C to 125°C). These enhancements make it suitable for higher-speed applications but may introduce different noise and stability characteristics requiring circuit re-evaluation.

Q: Are Texas Instruments parts (LMH6646, OPA2830, LMP7708) compatible with the AD8032ARM-REEL7 footprint?

A: Yes, mechanically compatible. LMH6646 and OPA2830 use 8-VSSOP packaging; LMP7708 uses 8-VSSOP packaging. These packages are pin-compatible with 8-MSOP footprints on standard printed circuit boards. However, electrical performance differs significantly. LMH6646 offers reduced performance (22 V/µs slew rate, 55 MHz bandwidth), while OPA2830 offers enhanced performance (560 V/µs slew rate, 290 MHz bandwidth). Circuit validation is required when substituting between manufacturers.

Q: What does "Last Time Buy" status mean for OPA2830IDGKT?

A: Last Time Buy status indicates that Texas Instruments has announced end-of-life for this part number. OPA2830IDGKT will no longer be manufactured after a specified date. For new designs or long-term production requirements, OPA2830IDGKR (active status) is the recommended alternative, as it maintains identical electrical specifications with assured future availability.

Q: Can LMP7708MME/NOPB replace AD8032ARM-REEL7 in all applications?

A: No. LMP7708MME/NOPB is classified as a general-purpose amplifier rather than a voltage feedback amplifier. While it maintains dual-channel configuration and rail-to-rail output, its performance profile differs significantly: slew rate of 5.9 V/µs (versus 35 V/µs), gain bandwidth product of 15 MHz (versus 80 MHz bandwidth), and substantially lower input bias current (0.2 pA versus 450 nA). This part is suitable only for low-frequency, low-noise applications and is not recommended as a general substitute.

Q: What is the significance of MSL (Moisture Sensitivity Level) ratings?

A: MSL 1 (Unlimited) indicates the component requires no special moisture control during storage or handling beyond standard ESD precautions. MSL 2 (1 Year) requires controlled humidity storage and has a one-year shelf life from the date of manufacture. For long-term inventory management, parts with MSL 1 rating (AD8032ARMZ-REEL7, ADA4807-2ARMZ-R7) offer advantages over MSL 2 parts (OPA2830IDGKR, OPA2830IDGKT) in terms of storage flexibility and reduced risk of moisture-induced failures.

Q: How do I determine which substitute part is appropriate for my application?

A: Evaluate your application requirements against three criteria: (1) Required bandwidth and slew rate performance, (2) Output current and load-driving capability, (3) Operating temperature range. If your application operates within -40°C to 85°C and requires 80 MHz bandwidth and 35 V/µs slew rate, AD8032ARMZ-REEL7 is the direct substitute. If higher performance is needed, evaluate ADA4807-2ARMZ-R7 or OPA2830IDGKR. If lower performance is acceptable, LMH6646 variants may be considered. Consult application circuit schematics and signal conditioning requirements to confirm compatibility.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message