Request Quote
(Ships tomorrow)
AD8012AR Equivalent & Substitute Parts
Part Overview
The AD8012AR is a current feedback amplifier manufactured by Analog Devices Inc., configured as a dual-channel operational amplifier in an 8-SOIC surface mount package. This device is classified as obsolete, which necessitates identification of equivalent and substitute components for new designs or production continuity. The AD8012AR delivers high-speed amplification with a slew rate of 2250V/µs and a gain bandwidth product of 75 MHz, making it suitable for applications requiring moderate to high-frequency signal processing within a 3V to 12V supply range.
Substiute Parts
Key Parameters
| Parameter | Value | Unit |
|---|---|---|
| Amplifier Type | Current Feedback | — |
| Number of Circuits | 2 | — |
| Slew Rate | 2250 | V/µs |
| Gain Bandwidth Product | 75 | MHz |
| -3dB Bandwidth | 350 | MHz |
| Current - Input Bias | 3 | µA |
| Voltage - Input Offset | 1.5 | mV |
| Current - Supply (per channel) | 1.7 | mA |
| Current - Output / Channel | 125 | mA |
| Voltage - Supply Span (Min) | 3 | V |
| Voltage - Supply Span (Max) | 12 | V |
| Operating Temperature | -40 to 85 | °C |
| Package / Case | 8-SOIC (0.154", 3.90mm Width) | — |
| Mounting Type | Surface Mount | — |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) | — |
Substitute Part Grouping Explanation
Substitution of the AD8012AR is determined by strict alignment of electrical and mechanical parameters. The primary substitution criteria are:
Critical Parameters for Substitution:
- Amplifier Type: Current Feedback (required for functional equivalence)
- Number of Circuits: 2 (dual-channel configuration)
- Package / Case: 8-SOIC form factor (mechanical compatibility)
- Operating Temperature Range: -40°C to 85°C (environmental specification)
- Supply Voltage Range: Minimum 3V to Maximum 12V (power supply compatibility)
Secondary Parameters for Functional Compatibility:
- Slew Rate: 2250V/µs (performance baseline)
- Gain Bandwidth Product: 75 MHz (frequency response)
- -3dB Bandwidth: 350 MHz (bandwidth specification)
- Current - Output / Channel: 125 mA (output drive capability)
Substitute parts are grouped into two categories:
Direct Equivalents: Parts that maintain identical or superior electrical specifications while differing only in packaging format or product status (Active vs. Obsolete).
Functional Alternatives: Parts that share the current feedback amplifier topology and 8-SOIC package but exhibit variations in performance parameters. These alternatives are suitable when application requirements permit relaxed performance specifications or when enhanced performance is acceptable.
Parameter Comparison
| Parameter | AD8012AR | AD8012ARZ | EL5263ISZ-T7 | LMH6724MA/NOPB | LMH6724MAX/NOPB | MAX4225ESA+ | MAX4227ESA+ |
|---|---|---|---|---|---|---|---|
| Manufacturer | Analog Devices | Analog Devices | Renesas | National Semiconductor | National Semiconductor | Analog Devices/Maxim | Analog Devices/Maxim |
| Product Status | Obsolete | Active | Obsolete | Active | Active | Active | Active |
| Amplifier Type | Current Feedback | Current Feedback | Current Feedback | Current Feedback | Current Feedback | Current Feedback | Current Feedback |
| Number of Circuits | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Slew Rate (V/µs) | 2250 | 2250 | 4000 | 600 | 600 | 1100 | 1700 |
| Gain Bandwidth Product (MHz) | 75 | 75 | — | — | — | — | — |
| -3dB Bandwidth (MHz) | 350 | 350 | 500 | 370 | 370 | 1000 | 600 |
| Current - Input Bias (µA) | 3 | 3 | 2 | 2 | 2 | 2 | 2 |
| Voltage - Input Offset (mV) | 1.5 | 1.5 | 1.5 | 1 | 1 | 0.5 | 0.5 |
| Current - Supply per Channel (mA) | 1.7 | 1.7 | 1.5 | 1 | 1 | 6 | 6 |
| Current - Output / Channel (mA) | 125 | 125 | 100 | 110 | 110 | 80 | 80 |
| Voltage - Supply Span Min (V) | 3 | 3 | 5 | 4.5 | 4.5 | 5.7 | 5.7 |
| Voltage - Supply Span Max (V) | 12 | 12 | 12 | 12 | 12 | 11 | 11 |
| Operating Temperature (°C) | -40 to 85 | -40 to 85 | -40 to 85 | -40 to 85 | -40 to 85 | -40 to 85 | -40 to 85 |
| Package / Case | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| Mounting Type | Surface Mount | Surface Mount | Surface Mount | Surface Mount | Surface Mount | Surface Mount | Surface Mount |
| RoHS Status | — | ROHS3 Compliant | ROHS3 Compliant | — | — | ROHS3 Compliant | ROHS3 Compliant |
| MSL | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | — | — | 1 (Unlimited) | 1 (Unlimited) |
Engineering Selection Recommendations
Primary Recommendation: AD8012ARZ
The AD8012ARZ is the direct equivalent of the AD8012AR, manufactured by Analog Devices Inc. This part maintains identical electrical specifications including slew rate (2250V/µs), gain bandwidth product (75 MHz), and -3dB bandwidth (350 MHz). The AD8012ARZ differs only in packaging format (Tube) and product status (Active). This part is ROHS3 compliant and carries MSL rating of 1 (Unlimited), making it suitable for production environments with standard moisture control protocols. The active product status ensures long-term availability and supply chain continuity.
Secondary Recommendations for Enhanced Performance:
MAX4225ESA+T and MAX4225ESA+ deliver superior bandwidth performance (1 GHz -3dB bandwidth) and lower input offset voltage (500 µV vs. 1.5 mV). These parts are ROHS3 compliant with MSL 1 rating. The trade-off is increased supply current per channel (6 mA vs. 1.7 mA) and reduced output current per channel (80 mA vs. 125 mA). These parts are suitable for applications prioritizing bandwidth performance over power efficiency.
MAX4227ESA+ provides intermediate performance with 600 MHz -3dB bandwidth and 1700V/µs slew rate, offering a balance between the AD8012AR baseline and the MAX4225 enhanced performance. Supply current and output current specifications match the MAX4225 series.
LMH6724MA/NOPB and LMH6724MAX/NOPB offer reduced supply current (1 mA per channel) and comparable -3dB bandwidth (370 MHz). These parts are suitable for power-constrained applications. Minimum supply voltage is 4.5V, which restricts use in 3V supply systems.
EL5263ISZ-T7 provides enhanced slew rate (4000V/µs) and bandwidth (500 MHz) but is classified as obsolete. This part carries MSL 1 rating and ROHS3 compliance. Use is limited to replacement scenarios where existing designs require this specific performance profile.
Frequently Asked Questions (FAQ)
Q: Can AD8012ARZ be used as a direct replacement for AD8012AR?
A: Yes. The AD8012ARZ is electrically identical to the AD8012AR. Both parts share the same slew rate (2250V/µs), gain bandwidth product (75 MHz), and -3dB bandwidth (350 MHz). The primary difference is product status: AD8012ARZ is active, ensuring continued availability. Both parts use the 8-SOIC package and operate across the -40°C to 85°C temperature range.
Q: What is the impact of switching to MAX4225ESA+ from AD8012AR?
A: The MAX4225ESA+ provides superior bandwidth (1 GHz vs. 350 MHz) and lower input offset voltage (500 µV vs. 1.5 mV). However, supply current per channel increases from 1.7 mA to 6 mA, and output current per channel decreases from 125 mA to 80 mA. The minimum supply voltage is 5.7V, which restricts operation in 3V systems. Circuit redesign may be required to accommodate these changes.
Q: Are all substitute parts available in 8-SOIC packaging?
A: Yes. All substitute parts listed are available in 8-SOIC (0.154", 3.90mm Width) surface mount packages, ensuring mechanical compatibility with existing PCB layouts designed for the AD8012AR.
Q: What is the significance of product status (Active vs. Obsolete)?
A: Active products have guaranteed long-term availability and manufacturer support. Obsolete products may have limited stock and no guarantee of future supply. For new designs, active products (AD8012ARZ, LMH6724MA/NOPB, LMH6724MAX/NOPB, MAX4225ESA+, MAX4227ESA+) are preferred. Obsolete products (AD8012AR, EL5263ISZ-T7) are suitable only for replacement or maintenance of existing systems.
Q: Which substitute part has the lowest power consumption?
A: The LMH6724MA/NOPB and LMH6724MAX/NOPB deliver the lowest supply current per channel at 1 mA, compared to 1.7 mA for the AD8012AR. However, these parts require a minimum supply voltage of 4.5V, which may not be compatible with 3V systems.
Q: Can I use a substitute part with different supply voltage requirements?
A: Supply voltage compatibility must be verified against your system design. The AD8012AR operates from 3V to 12V. Substitute parts with higher minimum supply voltages (e.g., MAX4225ESA+ at 5.7V minimum) cannot be used in 3V systems without circuit modification. Verify your application's supply voltage range before selecting a substitute.
Q: What does MSL (Moisture Sensitivity Level) rating mean?
A: MSL indicates the maximum time a component can be exposed to ambient conditions (typically 30°C, 85% relative humidity) before soldering. MSL 1 (Unlimited) means the part has no time restriction and requires standard moisture control. MSL 3 (168 Hours) requires the part to be soldered within 168 hours of exposure to ambient conditions. All recommended substitutes carry MSL 1 or better ratings.
Q: Are all substitute parts ROHS3 compliant?
A: Most active substitute parts (AD8012ARZ, EL5263ISZ-T7, MAX4225ESA+, MAX4225ESA+T, MAX4227ESA+) are ROHS3 compliant. The LMH6724 series does not specify RoHS status in the provided data. Verify RoHS compliance requirements for your application before final part selection.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts