AD7386BCPZ-RL Equivalent & Substitute Parts

Part Overview

The AD7386BCPZ-RL is a 16-bit Analog to Digital Converter manufactured by Analog Devices Inc., designed for data acquisition applications requiring simultaneous sampling across multiple input channels. This device features 4 single-ended inputs with 2 integrated SAR (Successive Approximation Register) converters, operating at a 4 MHz sampling rate. The part is currently in active production status with full ROHS3 compliance and REACH unaffected designation. Substitute parts are identified based on identical electrical specifications and compatible packaging configurations to support procurement flexibility and supply chain continuity.

Substiute Parts

AD7386BCPZ-RL

Analog Devices Inc.In Stock: 1199AD7386BCPZ-RL Datasheet

Current PartRFQ

AD7386BCPZ-RL7

Analog Devices Inc.In Stock: 3199AD7386BCPZ-RL7 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the AD7386BCPZ-RL are identified based on strict parametric equivalence across all critical electrical and mechanical specifications. The substitution logic is based on the following key parameters that must remain identical:

• Resolution: 16-bit
• Sampling Rate: 4 MHz
• Input Configuration: 4 single-ended inputs
• Converter Architecture: 2 SAR converters with 1:1 S/H:ADC ratio
• Supply Voltage Ranges: Analog (3V ~ 3.6V) and Digital (1.65V ~ 3.6V)
• Package Type: 16-LFCSP (3x3) with exposed pad
• Operating Temperature Range: -40°C ~ 125°C
• Compliance: ROHS3 Compliant, REACH Unaffected

The only permitted variation is in packaging format (Tape & Reel versus Cut Tape & Digi-Reel®), which does not affect electrical performance or functional compatibility in circuit design.

Parameter Comparison

Engineering Selection Recommendations

Both the AD7386BCPZ-RL and AD7386BCPZ-RL7 are active production parts with identical electrical specifications and functional performance. Selection between these parts is determined by packaging and procurement requirements rather than technical performance criteria.

The AD7386BCPZ-RL in Tape & Reel format is suitable for high-volume automated assembly operations. The AD7386BCPZ-RL7 in Cut Tape & Digi-Reel® format provides flexibility for lower-volume production runs and mixed-component procurement scenarios. Both parts maintain full ROHS3 compliance and REACH unaffected status, ensuring regulatory compatibility across all applications.

Frequently Asked Questions (FAQ)

Q: Can AD7386BCPZ-RL7 be used as a direct replacement for AD7386BCPZ-RL in circuit design?

A: Yes. Both parts are electrically and functionally identical. The only difference is packaging format (Tape & Reel versus Cut Tape & Digi-Reel®), which does not affect circuit performance, pin configuration, or electrical characteristics.

Q: What is the difference between Tape & Reel and Cut Tape & Digi-Reel® packaging?

A: Tape & Reel packaging is optimized for high-volume automated pick-and-place assembly. Cut Tape & Digi-Reel® packaging provides individual component access and is suitable for lower-volume production, prototyping, and mixed-component orders.

Q: Are both parts compliant with current regulatory standards?

A: Yes. Both AD7386BCPZ-RL and AD7386BCPZ-RL7 are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

Q: What are the critical parameters that define substitution eligibility?

A: Substitution is based on identical 16-bit resolution, 4 MHz sampling rate, 4 single-ended inputs, 2 SAR converters, matching supply voltage ranges (3V ~ 3.6V analog, 1.65V ~ 3.6V digital), 16-LFCSP (3x3) package type, and -40°C ~ 125°C operating temperature range.

Q: Can these parts be used interchangeably in existing designs without PCB modification?

A: Yes. Both parts use the identical 16-LFCSP (3x3) package with exposed pad and surface mount configuration, requiring no PCB layout changes for substitution.