AD6655ABCPZRL7-150 Equivalent & Substitute Parts

Part Overview

The AD6655ABCPZRL7-150 is an RF IC IF Diversity Receiver designed for CDMA, EDGE, and GSM applications with a frequency range of 0Hz to 450MHz and sample rates up to 150MSPS. This component is packaged in a 64-LFCSP-VQ (9x9) surface mount configuration with 14-bit resolution.

The AD6655ABCPZRL7-150 has reached obsolete product status. Identifying equivalent substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production requirements for systems utilizing this IF receiver architecture.

Substiute Parts

AD6655ABCPZRL7-150

Analog Devices Inc.In Stock: 1022AD6655ABCPZRL7-150 Datasheet

Current PartRFQ

AD6655ABCPZ-150

Analog Devices Inc.In Stock: 1801AD6655ABCPZ-150 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the AD6655ABCPZRL7-150 is determined by strict equivalence across the following critical parameters:

• Functional Equivalence: IF Diversity Receiver architecture for CDMA, EDGE, GSM applications
• Electrical Specifications: 14-bit resolution, 150MSPS sample rate, 0Hz to 450MHz frequency range
• Package Compatibility: 64-LFCSP-VQ (9x9) surface mount configuration
• Mechanical Compatibility: 64-VFQFN Exposed Pad, CSP package type
• Environmental Compliance: MSL 3 (168 Hours) moisture sensitivity rating

The AD6655ABCPZ-150 meets all substitution criteria as a direct equivalent with identical electrical and mechanical specifications. The primary distinction is packaging format (Tray versus Tape & Reel) and active product status.

Parameter Comparison

Engineering Selection Recommendations

The AD6655ABCPZ-150 is the direct substitute for the obsolete AD6655ABCPZRL7-150. Both components share identical electrical specifications, package geometry, and functional characteristics. The substitute part carries active product status with documented ROHS3 compliance and REACH unaffected certification, providing regulatory assurance for new production and long-term availability.

Selection of the AD6655ABCPZ-150 requires only consideration of packaging format compatibility. The substitute is supplied in Tray packaging rather than Tape & Reel format. Procurement and assembly processes must accommodate this packaging difference.

Frequently Asked Questions (FAQ)

Q: Are the AD6655ABCPZRL7-150 and AD6655ABCPZ-150 electrically identical?

A: Yes. Both components are 14-bit IF Diversity Receivers with 150MSPS sample rates, 0Hz to 450MHz frequency range, and identical pin configurations in the 64-LFCSP-VQ (9x9) package.

Q: What is the difference between these two part numbers?

A: The primary difference is packaging format. The AD6655ABCPZRL7-150 is supplied in Tape & Reel configuration, while the AD6655ABCPZ-150 is supplied in Tray format. The suffix "-RL7" indicates Tape & Reel packaging; the absence of this suffix indicates Tray packaging.

Q: Can I use the AD6655ABCPZ-150 as a direct replacement on existing PCBs?

A: Yes. The AD6655ABCPZ-150 is mechanically and electrically compatible with the AD6655ABCPZRL7-150. PCB footprints, solder pad layouts, and electrical connections are identical. Packaging format does not affect board-level compatibility.

Q: Why is the original part obsolete?

A: The AD6655ABCPZRL7-150 has reached end-of-life status. The AD6655ABCPZ-150 remains in active production and is the recommended source for new component procurement.

Q: Are there compliance differences between these parts?

A: The AD6655ABCPZ-150 carries documented ROHS3 compliance and REACH unaffected certification. Compliance documentation for the obsolete AD6655ABCPZRL7-150 is not specified in available data.

Q: What is the MSL rating for these components?

A: Both parts carry MSL 3 (168 Hours) moisture sensitivity rating. Standard moisture control procedures during storage, handling, and assembly apply.