AD586LR-REEL Equivalent & Substitute Parts

Part Overview

The AD586LR-REEL is a Series Voltage Reference IC manufactured by Analog Devices Inc., designed to provide a fixed 5V output with ±0.05% tolerance. This component is classified as Power Management (PMIC) and is housed in an 8-SOIC surface mount package. The AD586LR-REEL is currently listed as obsolete, making identification of suitable substitute parts essential for ongoing design support and production continuity.

Substiute Parts

AD586LR-REEL

Analog Devices Inc.In Stock: 949AD586LR-REEL Datasheet

Current PartRFQ

AD586LRZ-REEL

Analog Devices Inc.In Stock: 2950AD586LRZ-REEL Datasheet

DirectRFQ

AD586LRZ-REEL7

Analog Devices Inc.In Stock: 7973AD586LRZ-REEL7 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the AD586LR-REEL are determined by strict equivalence across all critical electrical and mechanical parameters. The following parameters define substitutability:

• Fixed output voltage of 5V
• Output current capability of 10 mA
• Tolerance specification of ±0.05%
• Temperature coefficient of 5ppm/°C
• Input voltage range of 10.8V ~ 36V
• Supply current of 3mA
• 8-SOIC surface mount package (0.154", 3.90mm Width)
• Operating temperature range of 0°C ~ 70°C

All substitute parts listed maintain identical electrical specifications and package configuration, ensuring direct functional replacement in existing designs.

Parameter Comparison

Engineering Selection Recommendations

The AD586LR-REEL is obsolete and should be replaced with an active product for new designs and ongoing production support. Both AD586LRZ-REEL and AD586LRZ-REEL7 are active alternatives that maintain complete electrical and mechanical equivalence.

AD586LRZ-REEL is supplied in standard reel packaging and is recommended for high-volume production environments where reel format is standard practice.

AD586LRZ-REEL7 is supplied in Cut Tape (CT) & Digi-Reel® format and is suitable for applications requiring flexible packaging options or lower-volume requirements.

Both substitute parts carry ROHS3 compliance and REACH unaffected status, meeting current regulatory requirements. Selection between the two should be based on packaging and supply chain requirements rather than electrical performance, as all parameters are identical.

Frequently Asked Questions (FAQ)

Q: Can AD586LRZ-REEL or AD586LRZ-REEL7 be used as direct replacements for AD586LR-REEL?

A: Yes. Both parts are direct functional equivalents with identical electrical specifications, output voltage, current ratings, tolerance, temperature coefficient, and 8-SOIC package configuration. The primary differences are product status (active vs. obsolete) and packaging format.

Q: What is the difference between AD586LRZ-REEL and AD586LRZ-REEL7?

A: Both parts are electrically identical. The difference is in packaging format. AD586LRZ-REEL uses standard reel packaging, while AD586LRZ-REEL7 uses Cut Tape (CT) & Digi-Reel® format. Selection depends on supply chain and production requirements.

Q: Are there any compliance differences between the obsolete part and the substitutes?

A: The substitute parts AD586LRZ-REEL and AD586LRZ-REEL7 are ROHS3 compliant and REACH unaffected. The original AD586LR-REEL compliance status is not specified. For applications requiring regulatory compliance documentation, the active substitutes are preferred.

Q: Will the substitutes work in existing PCB designs without modification?

A: Yes. The 8-SOIC package dimensions and pin configuration are identical across all three parts. No PCB layout changes are required.

Q: What is the Moisture Sensitivity Level (MSL) for these parts?

A: All three parts have MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.