AD22293Z-RL Equivalent & Substitute Parts

Part Overview

The AD22293Z-RL is an analog accelerometer from Analog Devices Inc.'s iMEMS® series, designed for dual-axis (X, Y) motion sensing applications. This surface-mount component operates within a ±5g acceleration range with a bandwidth of 0.5Hz to 2.5kHz, making it suitable for vibration monitoring, tilt detection, and general motion measurement systems. The part is Active in product status with full RoHS3 compliance and REACH unaffected designation. Substitute parts are identified based on identical electrical performance parameters and mechanical compatibility within the 8-CLCC package format.

Substiute Parts

AD22293Z-RL

Analog Devices Inc.In Stock: 889AD22293Z-RL Datasheet

Current PartRFQ

AD22293Z-RL7

Analog Devices Inc.In Stock: 1488AD22293Z-RL7 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the AD22293Z-RL are identified through strict parametric equivalence. The primary substitution criterion is electrical and mechanical compatibility, determined by the following key parameters:

• Acceleration range (±5g)
• Dual-axis configuration (X, Y)
• Sensitivity specification (312 mV/g)
• Bandwidth range (0.5Hz ~ 2.5kHz)
• Output type (Analog Voltage)
• Supply voltage range (3V ~ 6V)
• Operating temperature range (-40°C ~ 125°C)
• Package format (8-CLCC, 5x5mm)
• Mounting type (Surface Mount)

The AD22293Z-RL7 meets all these criteria and is classified as a parametric equivalent. The difference between these parts lies exclusively in packaging format: the main part is supplied in Tape & Reel (TR) format, while the substitute is available in Cut Tape (CT) & Digi-Reel® format. Both parts share identical electrical performance and mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

Both the AD22293Z-RL and AD22293Z-RL7 are Active products with identical electrical specifications and mechanical compatibility. Selection between these parts should be based on packaging and supply chain requirements:

• Choose AD22293Z-RL when Tape & Reel (TR) packaging is required for automated assembly processes
• Choose AD22293Z-RL7 when Cut Tape (CT) or Digi-Reel® packaging is preferred for lower-volume applications or alternative handling methods

Both parts maintain full RoHS3 compliance, REACH unaffected status, and EAR99 export classification. Moisture sensitivity level (MSL 1) indicates unlimited shelf life under standard storage conditions. No functional or performance differences exist between these parts; substitution is direct and interchangeable at the circuit level.

Frequently Asked Questions (FAQ)

Q: Can AD22293Z-RL7 be used as a direct replacement for AD22293Z-RL?

A: Yes. Both parts are parametric equivalents with identical electrical performance, sensitivity, bandwidth, and operating specifications. The only difference is packaging format (Tape & Reel versus Cut Tape & Digi-Reel®). Direct substitution is possible at the component level.

Q: What determines compatibility between these accelerometer variants?

A: Compatibility is determined by matching acceleration range (±5g), axis configuration (X, Y), sensitivity (312 mV/g), bandwidth (0.5Hz ~ 2.5kHz), output type (Analog Voltage), supply voltage (3V ~ 6V), operating temperature range (-40°C ~ 125°C), and package format (8-CLCC, 5x5mm). Both parts meet all these criteria.

Q: Does packaging format affect circuit performance?

A: No. Tape & Reel (TR) and Cut Tape (CT) & Digi-Reel® are supply and handling formats only. They do not affect electrical performance, sensitivity, bandwidth, or any functional characteristic of the accelerometer.

Q: Are there any compliance or certification differences?

A: No. Both parts carry identical RoHS3 compliance, REACH unaffected status, MSL 1 rating, and EAR99 export classification. No compliance or certification differences exist.

Q: Which packaging format should be selected for high-volume production?

A: Tape & Reel (TR) format is standard for automated pick-and-place assembly in high-volume manufacturing. Cut Tape (CT) & Digi-Reel® formats are typically used for lower-volume applications or manual assembly processes.