ACT96WF35PN Equivalent & Substitute Parts

Part Overview

The ACT96WF35PN is a 66-position circular connector plug with male pins manufactured by TE Connectivity Deutsch Connectors. This connector is designed for aerospace and military applications, featuring crimp termination, gold-plated mating contacts, and shielded construction. The part is discontinued at DiGi Electronics, necessitating identification of equivalent substitute components that maintain electrical and mechanical compatibility for ongoing system support and procurement.

Substiute Parts

ACT96WF35PN

TE Connectivity Deutsch ConnectorsIn Stock: 789ACT96WF35PN Datasheet

Current PartRFQ

D38999/26FF35PN

GlenairIn Stock: 1208D38999/26FF35PN Datasheet

SimilarRFQ

D38999/26FF35PN

GlenairIn Stock: 1208D38999/26FF35PN Datasheet

SimilarRFQ

D38999/26WF35PN

Souriau-Sunbank by EatonIn Stock: 1121D38999/26WF35PN Datasheet

SimilarRFQ

D38999/26WF35PN

Souriau-Sunbank by EatonIn Stock: 1121D38999/26WF35PN Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ACT96WF35PN are identified based on strict equivalence of the following critical parameters:

Electrical Compatibility Parameters:

• 66-position connector configuration
• Male pin connector type
• Gold contact finish for mating surfaces
• 5A current rating capability
• Shielded construction
• Copper alloy contact material

Mechanical Compatibility Parameters:

• Shell size 19-35 (MIL size F)
• Crimp termination method
• Threaded fastening type
• Composite shell material
• Operating temperature range -65°C ~ 175°C

Regulatory & Compliance Parameters:

• ECCN classification EAR99
• HTSUS code 8536.69.4020
• Moisture Sensitivity Level 1 (Unlimited)

Substitute parts must satisfy all electrical and mechanical parameters listed above to ensure direct interchangeability in aerospace and military applications.

Parameter Comparison

Engineering Selection Recommendations

D38999/26FF35PN (Glenair): This substitute maintains active product status and shares identical ECCN and HTSUS classifications with the original ACT96WF35PN. Glenair inventory of 1122 pieces provides superior availability compared to the discontinued TE Connectivity part. The D38999/26FF35PN carries MSL rating 1 (Unlimited), matching the original specification. This part is suitable for direct substitution in applications requiring continuous procurement.

D38999/26WF35PN (Souriau-Sunbank by Eaton): This alternative maintains active product status and equivalent regulatory classification (ECCN EAR99, HTSUS 8536.69.4020). Souriau-Sunbank inventory of 1103 pieces ensures availability. The part carries RoHS non-compliant status, consistent with the original ACT96WF35PN. MSL rating is listed as Not Applicable, which differs from the original specification. This part is suitable for applications where MSL classification is not a procurement requirement.

Both substitute parts are classified under identical ECCN and HTSUS codes, confirming regulatory equivalence for export and tariff purposes.

Frequently Asked Questions (FAQ)

Q: What determines if a circular connector can substitute for the ACT96WF35PN?

A: Substitution requires equivalence in connector type (plug with male pins), position count (66), shell size (19-35, MIL size F), termination method (crimp), contact finish (gold), shielding (shielded), current rating (5A), operating temperature range (-65°C ~ 175°C), and regulatory classifications (ECCN EAR99, HTSUS 8536.69.4020).

Q: Why is the ACT96WF35PN discontinued?

A: The part is discontinued at DiGi Electronics. Substitute parts D38999/26FF35PN and D38999/26WF35PN maintain active status with manufacturers Glenair and Souriau-Sunbank by Eaton, respectively.

Q: Are the substitute parts physically compatible with existing mating connectors?

A: Both substitute parts share the same 66-position, size 19-35 (MIL size F) configuration as the original ACT96WF35PN. Physical compatibility depends on the mating connector specification and system design requirements.

Q: What is the difference in Moisture Sensitivity Level between the substitutes?

A: The D38999/26FF35PN carries MSL 1 (Unlimited), matching the original ACT96WF35PN. The D38999/26WF35PN lists MSL as Not Applicable. Selection depends on system moisture sensitivity requirements during storage and handling.

Q: Do the substitute parts comply with the same export regulations?

A: Yes. All three parts—ACT96WF35PN, D38999/26FF35PN, and D38999/26WF35PN—share identical ECCN (EAR99) and HTSUS (8536.69.4020) classifications, confirming equivalent regulatory treatment for export and tariff purposes.

Q: What inventory levels are available for each part?

A: ACT96WF35PN has 734 pieces in stock. D38999/26FF35PN has 1122 pieces available. D38999/26WF35PN has 1103 pieces available. Both substitutes offer higher inventory levels than the discontinued original part.

Q: Are there differences in RoHS compliance between the parts?

A: The ACT96WF35PN and D38999/26WF35PN are both RoHS non-compliant. The D38999/26FF35PN RoHS status is not specified in available documentation. System requirements for RoHS compliance should guide part selection.