ACT96WB98SA Equivalent & Substitute Parts

Part Overview

The ACT96WB98SA is a 6-position circular connector plug with female sockets manufactured by TE Connectivity Deutsch Connectors. This connector is designed for aerospace and military applications and features crimp termination with gold-plated mating contacts. The part is discontinued at DiGi Electronics, necessitating identification of functionally equivalent alternatives that maintain compatibility with existing system requirements.

Substiute Parts

ACT96WB98SA

TE Connectivity Deutsch ConnectorsIn Stock: 1101ACT96WB98SA Datasheet

Current PartRFQ

CTVS06RF-11-98SA

Amphenol Aerospace OperationsIn Stock: 1110CTVS06RF-11-98SA Datasheet

SimilarRFQ

CTVS06RF-11-98SA-506

Amphenol Aerospace OperationsIn Stock: 1422CTVS06RF-11-98SA-506 Datasheet

SimilarRFQ

CTVS06RF-11-98SA-LC

Amphenol Aerospace OperationsIn Stock: 1375CTVS06RF-11-98SA-LC Datasheet

SimilarRFQ

D38999/26FB98SA

GlenairIn Stock: 901D38999/26FB98SA Datasheet

SimilarRFQ

D38999/26FB98SA

GlenairIn Stock: 901D38999/26FB98SA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ACT96WB98SA is determined by strict alignment of the following critical parameters:

Primary Compatibility Criteria:

• Connector type (Plug with Female Sockets)
• Number of positions (6)
• Shell size designation (11-98)
• Termination method (Crimp)
• Fastening type (Threaded)
• Mounting configuration (Free Hanging In-Line)
• Shielding requirement (Shielded)
• Contact finish (Gold plating on mating surfaces)
• MIL-DTL-38999 Series III compliance

Secondary Compatibility Criteria:

• Operating temperature range compatibility
• Ingress protection rating
• Contact material composition (Copper Alloy)
• Moisture sensitivity level (MSL 1)

The substitute parts listed maintain these core parameters while differing in shell finish, color, temperature rating extensions, and compliance certifications. All substitute parts are manufactured by aerospace-qualified suppliers and remain in active production status.

Parameter Comparison

Engineering Selection Recommendations

CTVS06RF-11-98SA-506 (Amphenol Aerospace Operations)

This substitute provides the most complete parameter alignment with the ACT96WB98SA. It maintains all critical electrical and mechanical specifications including 6-position configuration, 11-98 shell size, crimp termination, threaded fastening, and gold-plated mating contacts. The part features an extended operating temperature range (-65°C to 200°C) and achieves ROHS3 compliance. The electroless nickel shell finish provides enhanced corrosion resistance compared to the original cadmium finish. This part is currently in active production with 1,369 units in stock.

CTVS06RF-11-98SA-LC (Amphenol Aerospace Operations)

This variant is a plug housing assembly without integrated contacts. It is suitable for applications requiring separate contact installation or custom contact configurations. It maintains the same shell size, mounting type, and operating temperature range as CTVS06RF-11-98SA-506. This part is appropriate only when the connector housing alone is required without pre-installed contacts.

CTVS06RF-11-98SA (Amphenol Aerospace Operations)

This base variant provides core functionality equivalent to the ACT96WB98SA with active production status. Detailed parameter specifications are limited in available documentation. This part is suitable for applications where complete technical specifications have been independently verified.

D38999/26FB98SA (Glenair)

This Glenair-manufactured connector maintains MIL-DTL-38999 Series III compliance and is in active production. Limited technical parameter documentation is available. This part is suitable for applications where Glenair sourcing is preferred or required by procurement specifications.

Frequently Asked Questions (FAQ)

Q: Can CTVS06RF-11-98SA-506 directly replace ACT96WB98SA in existing assemblies?

A: Yes. Both connectors maintain identical 6-position configuration, 11-98 shell size, crimp termination, threaded fastening, and gold-plated mating contacts. The primary differences are shell finish (electroless nickel versus cadmium) and extended operating temperature range. System compatibility depends on whether these differences are acceptable for the specific application.

Q: What is the difference between CTVS06RF-11-98SA-506 and CTVS06RF-11-98SA-LC?

A: CTVS06RF-11-98SA-506 is a complete connector plug assembly with integrated female sockets. CTVS06RF-11-98SA-LC is a plug housing assembly without contacts included. The housing variant is used when contacts must be installed separately or when custom contact configurations are required.

Q: Does the change from cadmium to electroless nickel shell finish affect electrical performance?

A: No. Both finishes provide equivalent shielding and electrical performance. The electroless nickel finish offers improved corrosion resistance and environmental durability. The change is mechanical and environmental rather than electrical.

Q: Are all substitute parts MIL-DTL-38999 Series III compliant?

A: CTVS06RF-11-98SA-506 and CTVS06RF-11-98SA-LC are explicitly designated as MIL-DTL-38999 Series III, Tri-Start™ TV. Complete compliance documentation for CTVS06RF-11-98SA and D38999/26FB98SA should be obtained from manufacturers.

Q: What is the significance of ROHS3 compliance on the Amphenol parts?

A: ROHS3 compliance indicates the parts meet Restriction of Hazardous Substances Directive requirements. The original ACT96WB98SA is RoHS non-compliant. Selection of ROHS3-compliant substitutes is required for applications subject to environmental regulations or customer specifications mandating RoHS compliance.

Q: Can I use D38999/26FB98SA as a direct substitute?

A: D38999/26FB98SA is manufactured by Glenair and maintains MIL-DTL-38999 Series III compliance. However, limited technical parameter documentation is available in the provided data. Complete technical specifications should be obtained from Glenair to confirm compatibility with specific application requirements before implementation.

Q: What inventory levels are available for these substitute parts?

A: CTVS06RF-11-98SA-506 has 1,369 units in stock. CTVS06RF-11-98SA has 1,088 units in stock. CTVS06RF-11-98SA-LC has 1,334 units in stock. D38999/26FB98SA has 819 units in stock. All parts are available as new original stock.

Q: Are there any temperature rating limitations when substituting?

A: The ACT96WB98SA operates from -65°C to 175°C. CTVS06RF-11-98SA-506 and CTVS06RF-11-98SA-LC extend the upper limit to 200°C. This extended range does not create compatibility issues for applications operating within the original -65°C to 175°C range. Applications requiring operation above 175°C benefit from the extended rating of the Amphenol substitutes.