ACT96MF35PA Equivalent & Substitute Parts

Part Overview

The ACT96MF35PA is a 66-position circular connector plug with male pins manufactured by TE Connectivity Deutsch Connectors. This connector is designed for aerospace and military applications, featuring crimp termination, threaded fastening, and gold-plated mating contacts. The part is discontinued at DiGi Electronics, necessitating identification of equivalent substitute components that maintain electrical and mechanical compatibility for ongoing system support and procurement.

Substiute Parts

ACT96MF35PA

TE Connectivity Deutsch ConnectorsIn Stock: 816ACT96MF35PA Datasheet

Current PartRFQ

D38999/26WF35PA

Souriau-Sunbank by EatonIn Stock: 1179D38999/26WF35PA Datasheet

SimilarRFQ

D38999/26WF35PA

Souriau-Sunbank by EatonIn Stock: 1179D38999/26WF35PA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ACT96MF35PA is based on alignment of the following critical parameters:

• Connector Type and Pin Configuration: Plug configuration with male pins and 66-position capacity
• Shell Size Specifications: MIL Size F with 19-35 insert designation
• Termination Method: Crimp termination for contact attachment
• Fastening Mechanism: Threaded coupling for secure mating
• Contact Material and Finish: Gold-plated mating surface for corrosion resistance and electrical performance
• Current and Temperature Ratings: 5A current capacity and -65°C to 200°C operating range
• Shielding Configuration: Shielded design for electromagnetic interference protection
• Military Standard Compliance: MIL-DTL-38999 Series III designation

The substitute part D38999/26WF35PA meets these critical parameters and is classified as an equivalent component for the discontinued ACT96MF35PA.

Parameter Comparison

Engineering Selection Recommendations

The D38999/26WF35PA manufactured by Souriau-Sunbank by Eaton is an equivalent substitute for the discontinued ACT96MF35PA. Both components conform to MIL-DTL-38999 specifications and share identical electrical and mechanical parameters across all critical dimensions and performance characteristics.

The substitute part is currently in active production status with higher inventory availability (1132 pieces) compared to the original part. Both components maintain identical RoHS non-compliance status and export classification (EAR99), ensuring regulatory consistency in applications requiring military and aerospace-grade circular connectors.

Selection of the D38999/26WF35PA as a replacement for the ACT96MF35PA is supported by full parameter alignment and active product status, enabling continued procurement for systems requiring 66-position, MIL-DTL-38999 Series III circular connector plugs with crimp termination and gold-plated contacts.

Frequently Asked Questions (FAQ)

Q: Can the D38999/26WF35PA directly replace the ACT96MF35PA in existing assemblies?

A: Yes. Both components share identical specifications for connector type, position count, shell size, termination method, fastening type, contact finish, current rating, and shielding configuration. The components are mechanically and electrically interchangeable.

Q: Are there differences in the MIL-DTL-38999 series designation between these parts?

A: The ACT96MF35PA is designated as MIL-DTL-38999 Series III, ACT. The D38999/26WF35PA conforms to MIL-DTL-38999 specifications. Both parts meet the military standard requirements for 66-position circular connectors with the specified shell size and performance characteristics.

Q: What is the significance of the packaging difference?

A: The ACT96MF35PA is listed with no specified packaging designation, while the D38999/26WF35PA is supplied in bulk packaging. Packaging format does not affect connector performance or compatibility; it relates only to order quantity and handling procedures.

Q: Do both parts comply with the same regulatory standards?

A: Yes. Both components are RoHS non-compliant, classified under ECCN EAR99, and assigned the same HTSUS code (8536.69.4020). Regulatory compliance and export classification are identical.

Q: Why is the substitute part listed as active while the original is discontinued?

A: The ACT96MF35PA is discontinued at DiGi Electronics, indicating end-of-life status at that distributor. The D38999/26WF35PA remains in active production by Souriau-Sunbank by Eaton, ensuring continued availability for procurement and system support.

Q: Are the contact materials and finishes identical?

A: Yes. Both components feature copper alloy contacts with gold plating at the mating surface. The contact finish thickness specification of 50.0µin (1.27µm) applies to the original part; equivalent gold plating specifications are maintained in the substitute component.