ACT96MD97SN Equivalent & Substitute Parts

Part Overview

The ACT96MD97SN is a 12-position circular connector plug with female sockets manufactured by TE Connectivity Deutsch Connectors. This connector is designed for aerospace and military applications, featuring crimp termination, threaded fastening, and gold-plated mating contacts. The part is discontinued at DiGi Electronics, necessitating identification of equivalent substitute components that maintain electrical and mechanical compatibility for ongoing system support and procurement.

Substiute Parts

ACT96MD97SN

TE Connectivity Deutsch ConnectorsIn Stock: 1169ACT96MD97SN Datasheet

Current PartRFQ

D38999/26FD97SN

Souriau-Sunbank by EatonIn Stock: 1044D38999/26FD97SN Datasheet

SimilarRFQ

D38999/26FD97SN

Souriau-Sunbank by EatonIn Stock: 1044D38999/26FD97SN Datasheet

SimilarRFQ

D38999/26WD97SN

Souriau-Sunbank by EatonIn Stock: 1049D38999/26WD97SN Datasheet

SimilarRFQ

D38999/26WD97SN

Souriau-Sunbank by EatonIn Stock: 1049D38999/26WD97SN Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ACT96MD97SN are identified based on strict equivalence of the following critical parameters:

Electrical Compatibility Parameters:

• 12-position connector configuration
• Female socket connector type
• Gold contact finish for mating surfaces
• Current rating compatibility (7.5A, 13A)
• Shielded design

Mechanical Compatibility Parameters:

• Shell size 15-97 (MIL Size D)
• Crimp termination method
• Threaded fastening type
• Free hanging (in-line) mounting orientation

Environmental & Application Parameters:

• Operating temperature range -65°C ~ 200°C
• Aerospace and military application suitability
• MIL-DTL-38999 Series III compliance

The substitute parts D38999/26FD97SN and D38999/26WD97SN, manufactured by Souriau-Sunbank by Eaton, maintain these critical parameters and are classified as equivalent alternatives for the discontinued ACT96MD97SN.

Parameter Comparison

Engineering Selection Recommendations

D38999/26FD97SN Selection Criteria:

The D38999/26FD97SN is an active substitute part manufactured by Souriau-Sunbank by Eaton. This part maintains full electrical and mechanical compatibility with the ACT96MD97SN across all critical parameters. The D38999/26FD97SN carries ROHS3 compliance certification, providing regulatory advantage for applications subject to RoHS requirements. Current inventory availability is 1011 pieces.

D38999/26WD97SN Selection Criteria:

The D38999/26WD97SN is an active substitute part manufactured by Souriau-Sunbank by Eaton. This part maintains full electrical and mechanical compatibility with the ACT96MD97SN. The D38999/26WD97SN carries RoHS non-compliant status, matching the compliance profile of the original ACT96MD97SN. Current inventory availability is 957 pieces.

Compliance Considerations:

For applications requiring RoHS3 compliance, the D38999/26FD97SN is the appropriate selection. For applications where RoHS compliance is not mandated or where legacy non-compliant specifications are maintained, either substitute part is suitable. Both substitute parts are active products with established supply chains, providing long-term availability advantages over the discontinued ACT96MD97SN.

Frequently Asked Questions (FAQ)

Q: What makes D38999/26FD97SN and D38999/26WD97SN equivalent to ACT96MD97SN?

A: Both substitute parts maintain identical electrical and mechanical specifications: 12-position female socket plug configuration, shell size 15-97 (MIL Size D), crimp termination, threaded fastening, gold contact finish, shielded design, and operating temperature range of -65°C to 200°C. All three parts comply with MIL-DTL-38999 Series III standards and are rated for aerospace and military applications.

Q: What is the primary difference between the two substitute parts?

A: The D38999/26FD97SN carries ROHS3 compliance certification, while the D38999/26WD97SN maintains RoHS non-compliant status. Both parts are electrically and mechanically identical. Selection between these two depends on regulatory requirements for the end application.

Q: Can I use these substitute parts interchangeably with ACT96MD97SN?

A: Yes. The substitute parts are mechanically and electrically compatible with the ACT96MD97SN. Both D38999/26FD97SN and D38999/26WD97SN share identical connector type, position count, shell size, termination method, fastening type, contact finish, and operating specifications.

Q: Why is the original ACT96MD97SN discontinued?

A: The ACT96MD97SN is discontinued at DiGi Electronics. The substitute parts D38999/26FD97SN and D38999/26WD97SN are active products with ongoing manufacturer support and established supply availability.

Q: What packaging format are the substitute parts available in?

A: Both D38999/26FD97SN and D38999/26WD97SN are available in bulk packaging.

Q: Are there any temperature or current rating differences between these parts?

A: No. All three parts operate across the identical temperature range of -65°C to 200°C and support the same current ratings of 7.5A and 13A.

Q: Which substitute part should I select for new designs?

A: For new designs subject to RoHS3 regulatory requirements, select D38999/26FD97SN. For applications without RoHS compliance mandates or where legacy specifications are maintained, either part is suitable. Both are active products with reliable supply chains.