ACT96MD97PN Equivalent & Substitute Parts

Part Overview

The ACT96MD97PN is a 12-position circular connector plug with male pins, manufactured by TE Connectivity Deutsch Connectors. This connector is qualified to MIL-DTL-38999 Series III specifications and features crimp termination, gold-plated mating contacts, and shielded construction for aerospace and military applications. The part is discontinued at DiGi Electronics, necessitating identification of equivalent substitute components that maintain electrical and mechanical compatibility while ensuring continued availability and compliance with application requirements.

Substiute Parts

ACT96MD97PN

TE Connectivity Deutsch ConnectorsIn Stock: 956ACT96MD97PN Datasheet

Current PartRFQ

D38999/26FD97PN

GlenairIn Stock: 783D38999/26FD97PN Datasheet

SimilarRFQ

D38999/26FD97PN

GlenairIn Stock: 783D38999/26FD97PN Datasheet

SimilarRFQ

D38999/26WD97PN

Amphenol Aerospace OperationsIn Stock: 924D38999/26WD97PN Datasheet

SimilarRFQ

D38999/26WD97PN

Amphenol Aerospace OperationsIn Stock: 924D38999/26WD97PN Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ACT96MD97PN is determined by strict equivalence across the following critical parameters:

Mandatory Equivalence Parameters:

• Connector type (Plug, Male Pins)
• Number of positions (12)
• Shell size designation (15-97, MIL Size D)
• Termination method (Crimp)
• Fastening type (Threaded)
• Mounting configuration (Free Hanging, In-Line)
• Contact finish specification (Gold plating at 50.0µin minimum)
• Shielding requirement (Shielded)
• MIL-DTL-38999 Series III qualification

The substitute parts identified—D38999/26FD97PN (Glenair) and D38999/26WD97PN (Amphenol Aerospace Operations)—satisfy these mandatory parameters. Both are active production components with confirmed inventory availability. The D38999/26WD97PN operates within a reduced temperature range (-65°C ~ 175°C versus -65°C ~ 200°C for the main part) and features aluminum shell construction with olive drab cadmium finish, whereas the ACT96MD97PN uses composite shell material with nickel finish. These material and finish differences do not preclude substitution when application thermal and environmental requirements align with the substitute part specifications.

Parameter Comparison

Engineering Selection Recommendations

D38999/26FD97PN (Glenair): This substitute maintains full mechanical and electrical compatibility with the ACT96MD97PN across all specified parameters. The part is in active production status with confirmed inventory of 737 units. ECCN and HTSUS classifications are identical. Selection of this substitute is appropriate for applications where the original part specifications are required and no additional environmental or thermal constraints exist beyond those defined in the main part data.

D38999/26WD97PN (Amphenol Aerospace Operations): This substitute is qualified to MIL-DTL-38999 Series III and maintains mechanical compatibility across all critical parameters. The part features aluminum shell construction with olive drab cadmium finish and operates within a reduced temperature range of -65°C to 175°C, compared to the main part's -65°C to 200°C range. This substitute is in active production with 906 units in inventory. Selection of this substitute is appropriate for applications where the operating temperature does not exceed 175°C and where the material composition and finish specifications of the Amphenol Tri-Start™ TV series are acceptable. REACH compliance status differs from the main part (REACH Affected versus unspecified for main part).

Both substitute parts share identical ECCN and HTSUS classifications with the main part, ensuring consistent export control and tariff treatment.

Frequently Asked Questions (FAQ)

Q: Can D38999/26FD97PN be used as a direct replacement for ACT96MD97PN?

A: D38999/26FD97PN maintains equivalence across all critical mechanical and electrical parameters including connector type, position count, shell size, termination method, fastening type, contact finish, and shielding. Both parts are qualified to MIL-DTL-38999 Series III. Direct substitution is supported by parameter equivalence.

Q: What is the primary difference between D38999/26WD97PN and the original ACT96MD97PN?

A: The D38999/26WD97PN operates within a reduced maximum temperature range of -65°C to 175°C, compared to the ACT96MD97PN's -65°C to 200°C range. Additionally, the Amphenol part features aluminum shell construction with olive drab cadmium finish, whereas the TE Connectivity part uses composite shell material with nickel finish. All other critical parameters remain equivalent.

Q: Are there current availability differences between the substitute parts?

A: Both substitute parts are in active production status. D38999/26FD97PN (Glenair) has 737 units in inventory, while D38999/26WD97PN (Amphenol Aerospace Operations) has 906 units in inventory. The original ACT96MD97PN is discontinued at DiGi Electronics but 882 units remain in stock from existing inventory.

Q: Do the substitute parts have the same export control classification?

A: Yes. Both D38999/26FD97PN and D38999/26WD97PN share identical ECCN (EAR99) and HTSUS (8536.69.4020) classifications with the ACT96MD97PN, ensuring consistent export control and tariff treatment.

Q: What packaging format is available for the substitute parts?

A: Both substitute parts are supplied in bulk packaging, as specified in the provided data.

Q: Are the substitute parts RoHS compliant?

A: D38999/26WD97PN is RoHS non-compliant, matching the status of the original ACT96MD97PN. RoHS compliance status for D38999/26FD97PN is not specified in the provided data.

Q: How do the contact finish specifications compare?

A: The ACT96MD97PN and D38999/26WD97PN both specify gold contact finish with 50.0µin (1.27µm) thickness. Contact finish thickness for D38999/26FD97PN is not specified in the provided data.

Q: What is the operating temperature constraint for D38999/26WD97PN?

A: D38999/26WD97PN operates within the range -65°C to 175°C. Applications requiring operation above 175°C must use the original ACT96MD97PN (-65°C to 200°C) or D38999/26FD97PN if its temperature range is confirmed to meet requirements.