ACT96MD97PA Equivalent & Substitute Parts

Part Overview

The ACT96MD97PA is a 12-position circular connector plug with male pins manufactured by TE Connectivity Deutsch Connectors. This connector is designed for aerospace and military applications, featuring crimp termination, gold-plated mating contacts, and shielded construction. The part is discontinued at DiGi Electronics, necessitating identification of functionally equivalent substitute components that maintain electrical and mechanical compatibility for system integration and maintenance applications.

Substiute Parts

ACT96MD97PA

TE Connectivity Deutsch ConnectorsIn Stock: 853ACT96MD97PA Datasheet

Current PartRFQ

D38999/26FD97PA

GlenairIn Stock: 889D38999/26FD97PA Datasheet

SimilarRFQ

D38999/26FD97PA

GlenairIn Stock: 889D38999/26FD97PA Datasheet

SimilarRFQ

D38999/26WD97PA

GlenairIn Stock: 799D38999/26WD97PA Datasheet

SimilarRFQ

D38999/26WD97PA

GlenairIn Stock: 799D38999/26WD97PA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ACT96MD97PA are identified based on strict equivalence of the following critical parameters:

Electrical Compatibility:

• Connector type (Plug, Male Pins)
• Number of positions (12)
• Shell size designation (15-97, MIL Size D)
• Termination method (Crimp)
• Contact material and finish specifications (Copper Alloy, Gold plating)
• Current and voltage ratings

Mechanical Compatibility:

• Fastening type (Threaded)
• Orientation (A)
• Shielding configuration (Shielded)
• Shell material (Composite)
• Operating temperature range (-65°C ~ 200°C)

Regulatory & Environmental:

• Series compliance (MIL-DTL-38999 Series III)
• Moisture sensitivity level (MSL 1)
• ECCN classification (EAR99)
• HTSUS code (8536.69.4020)

Substitute parts must maintain all specified parameters to ensure direct functional replacement without circuit redesign or mechanical rework.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute Options:

The D38999/26FD97PA and D38999/26WD97PA manufactured by Glenair are active substitute components for the discontinued ACT96MD97PA. Both substitute parts maintain MIL-DTL-38999 Series III compliance and share identical regulatory classifications (ECCN EAR99, HTSUS 8536.69.4020).

Availability Considerations:

The D38999/26FD97PA offers 874 pieces in current inventory, while the D38999/26WD97PA provides 748 pieces. Both substitutes are actively produced and available in bulk packaging, providing supply continuity for applications requiring the ACT96MD97PA.

Compliance Status:

Both Glenair substitutes maintain MSL 1 (Unlimited) moisture sensitivity rating and are REACH Unaffected, ensuring compatibility with aerospace and military application requirements. The original ACT96MD97PA is RoHS non-compliant; substitute selection should confirm RoHS status requirements for the specific application.

Selection Basis:

Component selection between D38999/26FD97PA and D38999/26WD97PA should be based on application-specific requirements and inventory availability, as both parts satisfy the electrical, mechanical, and regulatory parameters of the discontinued ACT96MD97PA.

Frequently Asked Questions (FAQ)

Q: Can D38999/26FD97PA and D38999/26WD97PA be used interchangeably with ACT96MD97PA?

A: Both Glenair parts are functionally equivalent substitutes for the ACT96MD97PA based on MIL-DTL-38999 Series III compliance, identical connector type (12-position plug, male pins), crimp termination, shielded construction, and matching regulatory classifications. Direct substitution is supported for applications requiring these specifications.

Q: What are the key parameters that determine substitution compatibility?

A: Substitution compatibility is determined by: connector type and pin configuration (12-position plug, male pins), shell size designation (15-97, MIL Size D), termination method (crimp), contact material and finish (copper alloy with gold plating), fastening type (threaded), shielding configuration, operating temperature range (-65°C ~ 200°C), and MIL-DTL-38999 Series III compliance.

Q: Are there differences between D38999/26FD97PA and D38999/26WD97PA?

A: Both parts are listed as equivalent substitutes with identical electrical and mechanical specifications. Differences, if any, are not specified in the provided technical parameters. Selection between these two parts should be based on inventory availability and application-specific requirements.

Q: What is the inventory status of substitute parts?

A: D38999/26FD97PA is available with 874 pieces in stock, and D38999/26WD97PA is available with 748 pieces in stock. Both are supplied in bulk packaging and are actively produced by Glenair.

Q: Are the substitute parts RoHS compliant?

A: The original ACT96MD97PA is RoHS non-compliant. RoHS compliance status for the Glenair substitutes is not specified in the provided technical data. Confirmation of RoHS status should be obtained from the manufacturer for applications with specific RoHS requirements.

Q: What regulatory certifications apply to these connectors?

A: All parts (original and substitutes) are classified under ECCN EAR99 and HTSUS 8536.69.4020. Substitute parts are REACH Unaffected. Moisture sensitivity level is MSL 1 (Unlimited) for all components.