ACT94WD15BN Equivalent & Substitute Parts

Part Overview

The ACT94WD15BN is a 15-position circular connector receptacle housing manufactured by TE Connectivity Deutsch Connectors, designed for panel mount applications in MIL-DTL-38999 Series III configurations. This component features a composite shell with chromate over cadmium finish, shielded design, and operates across a temperature range of -65°C to 175°C. The part is currently discontinued at DiGi Electronics, necessitating identification of functionally equivalent alternatives from active product lines to maintain system compatibility and procurement continuity.

Substiute Parts

ACT94WD15BN

TE Connectivity Deutsch ConnectorsIn Stock: 786ACT94WD15BN Datasheet

Current PartRFQ

CTV07RW-15-15B

Amphenol Aerospace OperationsIn Stock: 777CTV07RW-15-15B Datasheet

SimilarRFQ

CTV07RW-15-15JN

Amphenol Aerospace OperationsIn Stock: 808CTV07RW-15-15JN Datasheet

SimilarRFQ

CTV07RW-15-15JN-LC

Amphenol Aerospace OperationsIn Stock: 1154CTV07RW-15-15JN-LC Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ACT94WD15BN is determined by strict equivalence across the following critical parameters: 15-position configuration, receptacle housing type for female sockets, 15-15 shell size, crimp contact termination with 16 (1) and 20 (14) contact size distribution, panel mount bulkhead configuration with threaded fastening, composite shell material, shielded design, and operating temperature range of -65°C to 175°C. All substitute parts must maintain MIL-DTL-38999 Series III compliance and support the same mechanical and electrical interface requirements. The substitute parts identified—CTV07RW-15-15B, CTV07RW-15-15JN, and CTV07RW-15-15JN-LC—satisfy these core parameters while originating from Amphenol Aerospace Operations and maintaining active product status.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts—CTV07RW-15-15B, CTV07RW-15-15JN, and CTV07RW-15-15JN-LC—are manufactured by Amphenol Aerospace Operations and maintain active product status, providing assured long-term availability compared to the discontinued ACT94WD15BN. Each substitute maintains full compliance with MIL-DTL-38999 Series III specifications and shares identical mechanical interfaces, electrical contact configurations, and environmental operating parameters.

CTV07RW-15-15B and CTV07RW-15-15JN-LC are functionally equivalent to the original part with respect to contact size distribution (16 (1), 20 (14)) and housing specifications. CTV07RW-15-15JN provides equivalent functionality with additional specification of gold mating contact finish and thermoplastic insert material, supporting aviation, marine, and military applications.

All substitute parts carry identical ECCN (EAR99) and HTSUS classifications, maintaining regulatory consistency. The non-compliant RoHS status across all parts reflects the military-grade specifications inherent to MIL-DTL-38999 Series III connectors. Moisture sensitivity level 1 (Unlimited) is maintained across all alternatives, indicating no special storage or handling requirements.

Frequently Asked Questions (FAQ)

Q: Can CTV07RW-15-15B directly replace ACT94WD15BN in existing assemblies?

A: Yes. Both parts share identical 15-position configuration, 15-15 shell size, crimp contact termination with 16 (1) and 20 (14) contact sizes, panel mount bulkhead fastening, composite shell material, shielded design, and -65°C to 175°C operating temperature range. Mechanical and electrical interfaces are fully compatible.

Q: What is the difference between CTV07RW-15-15B and CTV07RW-15-15JN-LC?

A: Both parts are functionally equivalent with identical contact size distribution and mechanical specifications. CTV07RW-15-15JN-LC is available in bulk packaging with higher inventory (1045 pcs) compared to CTV07RW-15-15B (760 pcs). Shell finish specifications differ slightly (Cadmium versus Cadmium), with both supporting the same environmental resistance and operating parameters.

Q: Does CTV07RW-15-15JN differ from the other substitutes?

A: CTV07RW-15-15JN maintains the same 15-position, 15-15 shell size, panel mount bulkhead configuration, and operating temperature range. This part specifies gold mating contact finish and thermoplastic insert material, with documented applications in aviation, marine, and military environments. Contact size distribution is not explicitly specified for this variant.

Q: Are all substitute parts RoHS compliant?

A: No. All substitute parts, including CTV07RW-15-15B, CTV07RW-15-15JN, and CTV07RW-15-15JN-LC, are RoHS non-compliant. This classification is consistent with military-grade MIL-DTL-38999 Series III specifications and does not affect functionality in military, aerospace, or industrial applications.

Q: What is the moisture sensitivity level for these connectors?

A: All parts carry MSL rating 1 (Unlimited), indicating no moisture sensitivity restrictions. These connectors do not require special dry storage, desiccant packaging, or bake-out procedures prior to assembly.

Q: Are the shell finish specifications functionally equivalent?

A: Yes. The ACT94WD15BN specifies chromate over cadmium finish, while substitute parts specify cadmium or olive drab cadmium finishes. All finishes provide equivalent environmental resistance and corrosion protection for the composite shell material in the specified operating temperature range.