ACT94WC35SA Equivalent & Substitute Parts

Part Overview

The ACT94WC35SA is a 22-position circular connector receptacle manufactured by TE Connectivity Deutsch Connectors, designed for aerospace and military applications. This component features female sockets with crimp termination, composite shell construction, and gold-plated mating contacts. The part is discontinued at DiGi Electronics, necessitating identification of functionally equivalent alternatives that maintain compatibility with existing system requirements and specifications.

Substiute Parts

ACT94WC35SA

TE Connectivity Deutsch ConnectorsIn Stock: 1033ACT94WC35SA Datasheet

Current PartRFQ

CTV07RW-13-35BA

Amphenol Aerospace OperationsIn Stock: 1070CTV07RW-13-35BA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ACT94WC35SA is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Number of Positions: 22
• Shell Size - Insert: 13-35
• Series: MIL-DTL-38999 Series III
• Connector Type: Receptacle for Female Sockets
• Mounting Type: Panel Mount
• Mounting Feature: Bulkhead - Front Side Nut
• Fastening Type: Threaded
• Orientation: A
• Shell Material: Composite
• Shielding: Shielded
• Operating Temperature Range: -65°C ~ 175°C
• Termination: Crimp

The CTV07RW-13-35BA from Amphenol Aerospace Operations satisfies all mandatory matching parameters and qualifies as a direct substitute. Both components are MIL-DTL-38999 Series III compliant circular connectors with identical mechanical and electrical interface specifications.

Parameter Comparison

Engineering Selection Recommendations

The CTV07RW-13-35BA qualifies as a direct substitute for the ACT94WC35SA based on the following engineering criteria:

Compliance and Certification Alignment: Both components comply with MIL-DTL-38999 Series III specifications and maintain identical mechanical interface requirements. Both are RoHS non-compliant and carry MSL 1 (Unlimited) moisture sensitivity ratings, indicating equivalent environmental handling requirements.

Product Status Consideration: The ACT94WC35SA is discontinued at DiGi Electronics, while the CTV07RW-13-35BA maintains active product status with comparable inventory availability. This status differential supports the substitution for ongoing procurement requirements.

Mechanical and Electrical Interface Compatibility: All critical parameters determining physical and functional compatibility are identical: 22-position configuration, 13-35 shell size, panel mount bulkhead installation, threaded fastening, and shielded composite construction. Both components operate across the identical temperature range of -65°C to 175°C.

Functional Equivalence: The CTV07RW-13-35BA is specified as a receptacle housing for female sockets with crimp contact termination, directly corresponding to the ACT94WC35SA's functional role. The substitution maintains system-level compatibility without requiring design modifications.

Frequently Asked Questions (FAQ)

Q: Can the CTV07RW-13-35BA directly replace the ACT94WC35SA in existing assemblies?

A: Yes. Both components are MIL-DTL-38999 Series III compliant 22-position receptacles with identical shell sizes (13-35), mounting configurations (panel mount bulkhead), and operating temperature ranges (-65°C to 175°C). The mechanical and electrical interfaces are fully compatible.

Q: What is the significance of the different series designations (ACT versus Tri-Start™ TV)?

A: Both designations refer to manufacturer-specific product lines within the MIL-DTL-38999 Series III standard. The series designation identifies the manufacturer's implementation but does not affect interchangeability when all other parameters match. Both meet the same military specification requirements.

Q: Are there any differences in contact specifications between these two parts?

A: The ACT94WC35SA specifies gold-plated mating contacts with 50.0µin (1.27µm) thickness and copper alloy material. The CTV07RW-13-35BA does not provide detailed contact specifications in the available data. Contact specifications should be verified against the respective manufacturer datasheets if contact material or plating thickness are critical to system performance.

Q: Does the CTV07RW-13-35BA include contacts?

A: No. The CTV07RW-13-35BA is specified as a receptacle housing with contacts not included. The ACT94WC35SA includes female sockets. If contacts are required, they must be procured separately and verified for compatibility with the CTV07RW-13-35BA housing.

Q: Are both parts suitable for aerospace and military applications?

A: Yes. Both components are specified for aerospace and military applications and comply with MIL-DTL-38999 Series III requirements. Both maintain RoHS non-compliant status and MSL 1 (Unlimited) ratings consistent with military-grade specifications.

Q: What is the difference between shell finish specifications?

A: The ACT94WC35SA specifies "Olive Drab Cadmium" finish, while the CTV07RW-13-35BA specifies "Cadmium" finish with "Olive Drab" housing color. Both finishes provide equivalent corrosion protection and environmental resistance. The functional difference is negligible for system-level applications.

Q: Can these connectors be used interchangeably in high-current applications?

A: The ACT94WC35SA is rated for 5A current. The CTV07RW-13-35BA does not specify a current rating in the available data. Current rating verification is required before substitution in applications where current capacity is a critical design parameter.