ACT94MD97SA Equivalent & Substitute Parts

Part Overview

The ACT94MD97SA is a 12-position circular connector receptacle manufactured by TE Connectivity Deutsch Connectors, designed for aerospace and military applications. This component features female sockets with crimp termination, panel mount configuration, and operates across a temperature range of -65°C to 200°C. The part is discontinued at DiGi Electronics, necessitating identification of functionally equivalent alternatives that maintain compatibility with existing system requirements while meeting MIL-DTL-38999 Series III specifications.

Substiute Parts

ACT94MD97SA

TE Connectivity Deutsch ConnectorsIn Stock: 1039ACT94MD97SA Datasheet

Current PartRFQ

CTV07RW-15-97BA

Amphenol Aerospace OperationsIn Stock: 1023CTV07RW-15-97BA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ACT94MD97SA is determined by strict adherence to the following critical parameters:

Mandatory Matching Parameters:

• Number of Positions: 12
• Shell Size - Insert: 15-97
• Connector Type: Receptacle with Female Sockets
• Mounting Type: Panel Mount
• Mounting Feature: Bulkhead - Front Side Nut
• Termination: Crimp
• Fastening Type: Threaded
• Orientation: A
• Shielding: Shielded
• Series Compliance: MIL-DTL-38999 Series III

Compatible Variation Parameters:

• Shell Finish: Nickel or Cadmium acceptable for aerospace/military applications
• Contact Finish: Gold or equivalent corrosion-resistant plating
• Operating Temperature: Substitute must support minimum -65°C to 175°C (original supports to 200°C)
• Housing Material: Composite construction maintained
• Applications: Aerospace and Military designation required

The substitute part CTV07RW-15-97BA from Amphenol Aerospace Operations satisfies all mandatory parameters while maintaining functional equivalence within the MIL-DTL-38999 Series III specification framework.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: CTV07RW-15-97BA

The CTV07RW-15-97BA from Amphenol Aerospace Operations is the qualified equivalent for the discontinued ACT94MD97SA. Both components comply with MIL-DTL-38999 Series III specifications and share identical mechanical and electrical interface parameters critical to system integration.

Availability Advantage: The substitute part maintains active product status with 998 units in stock, addressing the discontinuation of the original part. The ACT94MD97SA is no longer available through DiGi Electronics, making the CTV07RW-15-97BA the practical selection for new procurement and system maintenance.

Compliance Considerations: Both parts carry identical RoHS non-compliant status, ECCN classification (EAR99), and Moisture Sensitivity Level (MSL 1). This ensures regulatory and handling requirements remain consistent across the substitution.

Temperature Operating Range: The substitute operates across -65°C to 175°C, compared to the original -65°C to 200°C. System designs operating above 175°C require verification that the substitute meets thermal requirements. For applications within the -65°C to 175°C envelope, the substitute provides full functional equivalence.

Contact and Finish Specifications: The substitute utilizes crimp termination with composite housing and shielded construction, maintaining electrical performance characteristics. Shell finish differs (Cadmium versus Nickel), both acceptable for aerospace and military applications per MIL-DTL-38999 Series III standards.

Frequently Asked Questions (FAQ)

Q: Can CTV07RW-15-97BA directly replace ACT94MD97SA in existing assemblies?

A: Yes, for applications operating within -65°C to 175°C. Both components share identical mechanical interfaces (12-position, 15-97 shell size, panel mount bulkhead configuration) and comply with MIL-DTL-38999 Series III. If your system operates above 175°C, verify thermal requirements before substitution.

Q: What is the difference between the shell finishes (Nickel vs. Cadmium)?

A: Both finishes are qualified for aerospace and military applications under MIL-DTL-38999 Series III. Nickel provides corrosion resistance in standard environments, while Cadmium offers enhanced protection in harsh conditions. Selection depends on your specific environmental exposure requirements.

Q: Are contacts included with the CTV07RW-15-97BA?

A: No. The CTV07RW-15-97BA is supplied as a receptacle housing without contacts. Contacts must be procured separately and crimped according to MIL-DTL-38999 specifications. The ACT94MD97SA similarly requires separate contact procurement.

Q: Does the substitute maintain the same current rating?

A: The ACT94MD97SA specifies 7.5A and 13A current ratings. The CTV07RW-15-97BA does not list explicit current ratings in the provided specifications. Verify current handling capacity with Amphenol Aerospace Operations technical documentation before final selection if current rating is a critical design parameter.

Q: Are both parts RoHS compliant?

A: No. Both the ACT94MD97SA and CTV07RW-15-97BA are RoHS non-compliant. This is typical for aerospace and military connectors where performance and reliability requirements supersede RoHS restrictions. Confirm RoHS compliance requirements with your procurement and regulatory teams.

Q: What is the lead time for the substitute part?

A: The CTV07RW-15-97BA is listed as active with 998 units in stock. Lead times depend on your supplier and order volume. Contact your authorized distributor for current availability and delivery schedules.

Q: Can I use the substitute in new designs, or only as a replacement?

A: The CTV07RW-15-97BA is an active product suitable for both new designs and replacement applications. Its MIL-DTL-38999 Series III compliance and aerospace/military qualification make it appropriate for new development within the specified operating temperature range.

Q: How do I verify compatibility with my specific application?

A: Confirm the following parameters match your system requirements: 12-position configuration, 15-97 shell size, panel mount bulkhead installation, crimp termination, operating temperature range (-65°C to 175°C minimum), and shielded construction. Cross-reference your system documentation with the parameter comparison table provided above.