ACT94MD97PN Equivalent & Substitute Parts

Part Overview

The ACT94MD97PN is a 12-position circular connector receptacle with male pins manufactured by TE Connectivity Deutsch Connectors. This MIL-DTL-38999 Series III connector features crimp termination, panel mount bulkhead configuration, and gold-plated mating contacts rated for 7.5A and 13A operation across an extended temperature range of -65°C to 200°C. The part is discontinued at DiGi Electronics, necessitating identification of functionally equivalent alternatives from active product lines that maintain compatibility with existing aerospace and military applications.

Substiute Parts

ACT94MD97PN

TE Connectivity Deutsch ConnectorsIn Stock: 837ACT94MD97PN Datasheet

Current PartRFQ

CTV07RW-15-97A

Amphenol Aerospace OperationsIn Stock: 1147CTV07RW-15-97A Datasheet

SimilarRFQ

CTV07RW-15-97HN

Amphenol Aerospace OperationsIn Stock: 813CTV07RW-15-97HN Datasheet

SimilarRFQ

CTV07RW-15-97HN-LC

Amphenol Aerospace OperationsIn Stock: 1037CTV07RW-15-97HN-LC Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ACT94MD97PN is determined by strict adherence to the following critical parameters:

Primary Compatibility Criteria:

• MIL-DTL-38999 Series III compliance
• 12-position configuration
• Shell size 15-97 insert designation
• Receptacle connector type with male pins
• Panel mount bulkhead configuration with threaded fastening
• Crimp termination method
• Composite shell material
• Gold contact finish on mating surfaces
• Shielded design
• Copper alloy contact material
• Thermoplastic insert material
• Environment resistant ingress protection
• Normal (N) orientation

Substitute Candidates: The three substitute parts identified—CTV07RW-15-97HN, CTV07RW-15-97A, and CTV07RW-15-97HN-LC—are manufactured by Amphenol Aerospace Operations under the MIL-DTL-38999 Series III, Tri-Start™ TV product line. All three maintain the core mechanical and electrical interface specifications required for direct substitution in panel mount applications. The CTV07RW-15-97HN variant provides the closest functional equivalence as a complete receptacle assembly with male pins and integrated contacts. The CTV07RW-15-97A and CTV07RW-15-97HN-LC variants are receptacle housings supplied without contacts, suitable for applications where contact replacement or customization is required.

Parameter Comparison

Engineering Selection Recommendations

CTV07RW-15-97HN (Primary Substitute)

The CTV07RW-15-97HN is the direct functional equivalent for the ACT94MD97PN. This Amphenol Aerospace Operations connector maintains all critical mechanical and electrical interface parameters: 12-position configuration, 15-97 shell size, MIL-DTL-38999 Series III compliance, panel mount bulkhead design, crimp termination, composite shell construction, gold-plated mating contacts, and shielded architecture. The part is currently active in production with 766 units in stock. The operating temperature range is -65°C to 175°C, which is 25°C lower than the ACT94MD97PN maximum. The contact finish thickness is 100.0µin (2.54µm), exceeding the original 50.0µin (1.27µm) specification, providing enhanced durability. This variant is suitable for direct replacement in aerospace, aviation, marine, and military applications.

CTV07RW-15-97A (Housing-Only Substitute)

The CTV07RW-15-97A is a receptacle housing variant without integrated contacts. This configuration is applicable when existing contacts from the original ACT94MD97PN assembly can be retained or when contact specifications require customization. The housing maintains the same mechanical interface, mounting configuration, and MIL-DTL-38999 Series III compliance. Contact size specifications are 16 (4 positions) and 20 (8 positions). This variant is active with 1083 units in stock.

CTV07RW-15-97HN-LC (Housing-Only Substitute with Low-Cost Configuration)

The CTV07RW-15-97HN-LC is an alternative housing-only variant with identical mechanical specifications to the CTV07RW-15-97A. This part is designated with the "-LC" suffix indicating a low-cost configuration. Contact size specifications are 16 (4 positions) and 20 (8 positions). This variant is active with 938 units in stock.

Temperature Consideration

All Amphenol Aerospace substitute parts operate to -65°C to 175°C, which is 25°C below the ACT94MD97PN specification of -65°C to 200°C. Applications requiring operation above 175°C require engineering evaluation to determine if the reduced upper temperature limit is acceptable for the specific use case.

Frequently Asked Questions (FAQ)

Q: Can the CTV07RW-15-97HN directly replace the ACT94MD97PN in existing assemblies?

A: Yes. The CTV07RW-15-97HN maintains mechanical and electrical interface compatibility with the ACT94MD97PN. Both connectors conform to MIL-DTL-38999 Series III specifications, feature identical 12-position, 15-97 shell size configurations, and employ the same panel mount bulkhead fastening method. The CTV07RW-15-97HN is suitable for direct substitution in aerospace, aviation, marine, and military applications.

Q: What is the difference between CTV07RW-15-97HN and CTV07RW-15-97A?

A: The CTV07RW-15-97HN is a complete receptacle assembly with integrated male pins and contacts. The CTV07RW-15-97A is a receptacle housing supplied without contacts. Selection depends on whether contacts are to be retained from the original assembly or sourced separately. Both maintain identical mechanical interfaces and MIL-DTL-38999 Series III compliance.

Q: What is the difference between CTV07RW-15-97A and CTV07RW-15-97HN-LC?

A: Both are receptacle housings without integrated contacts. The CTV07RW-15-97HN-LC is designated with the "-LC" suffix indicating a low-cost configuration variant. Mechanical specifications and MIL-DTL-38999 Series III compliance are identical. Selection is based on procurement requirements and cost considerations.

Q: Does the operating temperature difference affect substitution suitability?

A: The CTV07RW series substitutes operate to -65°C to 175°C, compared to the ACT94MD97PN specification of -65°C to 200°C. Applications requiring operation above 175°C must be evaluated separately. For applications within the -65°C to 175°C range, the substitutes are fully compatible.

Q: Are the contact finish specifications equivalent?

A: The CTV07RW-15-97HN features 100.0µin (2.54µm) gold plating on mating contacts, compared to the ACT94MD97PN specification of 50.0µin (1.27µm). The increased thickness provides enhanced contact durability and corrosion resistance, meeting or exceeding the original specification.

Q: What is the inventory status of substitute parts?

A: CTV07RW-15-97HN has 766 units in stock. CTV07RW-15-97A has 1083 units in stock. CTV07RW-15-97HN-LC has 938 units in stock. All three variants are active products from Amphenol Aerospace Operations.

Q: Are all substitute parts RoHS compliant?

A: No. The ACT94MD97PN and all three substitute parts (CTV07RW-15-97HN, CTV07RW-15-97A, CTV07RW-15-97HN-LC) are RoHS non-compliant. This is consistent with MIL-DTL-38999 Series III aerospace and military connector specifications.

Q: What is the MSL rating for substitute parts?

A: All substitute parts carry MSL Rating 1 (Unlimited), identical to the ACT94MD97PN. This indicates unlimited shelf life without moisture sensitivity constraints.