ACT90MB35SN Equivalent & Substitute Parts

Part Overview

The ACT90MB35SN is a 13-position circular connector receptacle manufactured by TE Connectivity Deutsch Connectors, designed for aerospace and military applications. This connector features female sockets with crimp termination, panel mount configuration with flange, and operates across a temperature range of -65°C to 200°C. The part is discontinued at DiGi Electronics, necessitating identification of functionally equivalent alternatives that maintain compliance with MIL-DTL-38999 Series III specifications and support critical system requirements.

Substiute Parts

ACT90MB35SN

TE Connectivity Deutsch ConnectorsIn Stock: 1109ACT90MB35SN Datasheet

Current PartRFQ

CTVP00RW-11-35JN

Amphenol Aerospace OperationsIn Stock: 1083CTVP00RW-11-35JN Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ACT90MB35SN is based on strict equivalence across the following critical parameters:

Primary Equivalence Criteria:

• Connector type: Receptacle with female sockets
• Position count: 13 positions
• Shell size: 11-35 insert designation
• Mounting configuration: Panel mount with flange
• Termination method: Crimp
• Fastening mechanism: Threaded
• Shielding: Shielded construction
• Contact finish: Gold plating on mating surfaces
• Qualification: MIL-DTL-38999 Series III compliance

The substitute part CTVP00RW-11-35JN meets all primary equivalence criteria. Variations in secondary parameters such as shell finish color, contact finish thickness, and maximum operating temperature do not preclude substitution when the application requirements fall within the substitute's specified operating envelope.

Parameter Comparison

Engineering Selection Recommendations

The CTVP00RW-11-35JN qualifies as a direct substitute for the ACT90MB35SN based on functional equivalence across all critical connector parameters. Both parts are MIL-DTL-38999 Series III qualified, share identical mechanical and electrical interface specifications, and maintain equivalent environmental resistance ratings.

Substitution Considerations:

The substitute part operates to a maximum temperature of 175°C compared to the main part's 200°C rating. Applications requiring sustained operation above 175°C require evaluation against the substitute's thermal specifications.

The CTVP00RW-11-35JN features increased contact finish thickness (100.0µin versus 50.0µin), which provides enhanced wear resistance and contact durability over extended mating cycles.

Both parts carry identical export control classifications (EAR99) and moisture sensitivity levels (MSL 1), supporting equivalent supply chain and storage requirements.

The substitute part is currently active in production with confirmed inventory availability, addressing the discontinued status of the main part.

Frequently Asked Questions (FAQ)

Q: Can the CTVP00RW-11-35JN directly replace the ACT90MB35SN in existing assemblies?

A: Yes. Both connectors share identical mechanical interfaces (13-position, 11-35 shell size, panel mount flange configuration) and electrical specifications (crimp termination, gold-plated contacts, shielded construction). Physical fit and functional compatibility are equivalent.

Q: What is the significance of the different operating temperature ranges?

A: The ACT90MB35SN operates to 200°C while the CTVP00RW-11-35JN operates to 175°C. For applications operating within the 175°C maximum, both parts are equivalent. Applications requiring sustained operation between 175°C and 200°C require confirmation that the substitute meets thermal requirements.

Q: Why does the substitute part have thicker gold plating?

A: The CTVP00RW-11-35JN specifies 100.0µin (2.54µm) contact finish thickness compared to 50.0µin (1.27µm) for the main part. Increased plating thickness enhances contact durability and wear resistance during mating cycles, supporting extended service life in high-cycle applications.

Q: Are there compliance or regulatory differences between these parts?

A: Both parts are RoHS non-compliant, carry identical ECCN (EAR99) and HTSUS (8536.69.4020) classifications, and maintain MSL 1 moisture sensitivity ratings. Regulatory and compliance profiles are equivalent.

Q: What is the difference between the shell finishes?

A: The ACT90MB35SN features nickel shell finish with silver color, while the CTVP00RW-11-35JN features olive drab cadmium finish. Both finishes provide equivalent environmental resistance. Shell finish selection is typically driven by application aesthetics or specific procurement requirements rather than functional performance.

Q: Is the substitute part currently available?

A: Yes. The CTVP00RW-11-35JN is active in production with 987 pieces confirmed in stock, addressing the discontinued status of the ACT90MB35SN.

Q: Do both parts meet MIL-DTL-38999 Series III specifications?

A: Yes. Both the ACT90MB35SN and CTVP00RW-11-35JN are qualified to MIL-DTL-38999 Series III, ensuring equivalent performance and reliability standards for aerospace and military applications.