ACSL-6210-56R Equivalent & Substitute Parts

Part Overview

The ACSL-6210-56R is a Logic Output Optoisolator manufactured by Broadcom Limited, featuring 2500Vrms isolation voltage, 2 channels, and open collector Schottky clamped output configuration. This component is classified as Obsolete, which necessitates identification of active equivalent parts for ongoing design support and procurement continuity. The part operates across a 3V to 5.5V supply range with a 15MBd data rate and 10kV/µs common mode transient immunity, making it suitable for industrial isolation applications requiring high-speed signal transmission.

Substiute Parts

ACSL-6210-56R

Broadcom LimitedIn Stock: 1121ACSL-6210-56R Datasheet

Current PartRFQ

ACSL-6210-56RE

Broadcom LimitedIn Stock: 1603ACSL-6210-56RE Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The ACSL-6210-56R has one direct equivalent substitute: ACSL-6210-56RE. Both parts share the same base product number (ACSL-6210) and are manufactured by Broadcom Limited. Substitution eligibility is determined by the following critical parameters:

• Number of Channels: 2 (identical)
• Voltage - Isolation: 2500Vrms (identical)
• Common Mode Transient Immunity: 10kV/µs (identical)
• Output Type: Open Collector, Schottky Clamped (identical)
• Current - Output / Channel: 50 mA (identical)
• Data Rate: 15MBd (identical)
• Voltage - Supply: 3V ~ 5.5V (identical)
• Operating Temperature: -40°C ~ 100°C (identical)
• Package / Case: 8-SOIC (0.154", 3.90mm Width) (identical)
• Mounting Type: Surface Mount (identical)

The primary distinction between these parts is packaging format and product status. The ACSL-6210-56RE is supplied in Tape & Reel (TR) format and maintains Active product status, whereas the ACSL-6210-56R is Obsolete.

Parameter Comparison

Engineering Selection Recommendations

The ACSL-6210-56RE is the direct functional equivalent for the obsolete ACSL-6210-56R. Both parts deliver identical electrical and mechanical performance across all specified parameters. The ACSL-6210-56RE is recommended for new designs and ongoing procurement due to its Active product status and ROHS3 compliance. The primary consideration for component selection is packaging format: the ACSL-6210-56RE is supplied in Tape & Reel format, which is standard for automated assembly operations. If bulk packaging is required, alternative sourcing channels or special order arrangements may be necessary through the manufacturer.

Frequently Asked Questions (FAQ)

Q: Can ACSL-6210-56RE be used as a direct replacement for ACSL-6210-56R in existing designs?

A: Yes. Both parts are electrically and mechanically identical across all functional parameters, including isolation voltage, channel count, output type, data rate, and operating temperature range. The primary difference is packaging format and product status.

Q: What is the difference between the bulk and Tape & Reel packaging options?

A: Bulk packaging (ACSL-6210-56R) is typically used for manual assembly or small-volume applications. Tape & Reel packaging (ACSL-6210-56RE) is designed for automated pick-and-place assembly equipment and is the standard format for high-volume production. Both formats contain the same component with identical performance characteristics.

Q: Why is the ACSL-6210-56R classified as Obsolete?

A: Obsolete status indicates that the manufacturer has discontinued production of this specific part number. The ACSL-6210-56RE remains in active production and serves as the current equivalent.

Q: Does the ROHS3 compliance difference affect component functionality?

A: No. ROHS3 compliance is a regulatory and environmental certification that does not alter electrical or mechanical performance. The ACSL-6210-56RE meets current environmental standards, while the ACSL-6210-56R does not. For applications subject to RoHS regulations, the ACSL-6210-56RE is the appropriate selection.

Q: Are there any pin-to-pin compatibility concerns between these parts?

A: No. Both parts use the identical 8-SOIC package with the same pin configuration, footprint, and electrical interface. PCB layout and schematic connections require no modification.

Q: What is the Moisture Sensitivity Level (MSL) rating, and does it differ between these parts?

A: Both parts carry an MSL rating of 1 (Unlimited), indicating no moisture sensitivity restrictions. Standard handling and storage procedures apply equally to both part numbers.